Albatron PM945GZ Bedienungsanleitung

PM945GZ

All rights are reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a

retrieval system or translated into any language or computer language, in any form or by any means,

electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written

permission of the company. Brands and product names are trademarks or registered trademarks of their

respective companies.

The vendor makes no representations or warranties with respect to the contents herein and especially

disclaim any implied warranties of merchantability or fitness for any purpose. Further the vendor reserves

the right to revise this publication and to make changes to the contents herein without obligation to notify

any party beforehand. Duplication of this publication, in part or in whole, is not allowed without first

obtaining the vendor’s approval in writing.

Trademark

All the trademarks or brands in this document are registered by their respective owner.

Disclaimer

We make no warranty of any kind with regard to the content of this user’s manual. The content is subject

to change without notice and we will not be responsible for any mistakes found in this user’s manual. All

the brand and product names are trademarks of their respective companies.

FCC Compliance Statement

This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to

Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may cause harmful interference

to radio communications. Operation of this equipment in a residential area is likely to cause harmful

interference in which case the user will be required to correct the interference at his own expense.

However, there is no guarantee that interference will not occur in a particular installation.

CE Mark

The device is in accordance with 89/336 ECC-ENC Directive.

er: EG10

Mainboard PM945GZ

PM945GZ

Intel®945GZ & ICH7

Support Socket 775 Intel®CoreTM 2 Duo/Pentium®Extreme Edition/

Pentium®D/ Pentium®4/Celeron®D Processor

User Manual

Enabling the Hyper-Threading Technology, your computer system is

required to have components as the following:

CPU: An Intel®Pentium®4 Processor with HT Technology

Chipset: An Intel®Chipset that supports HT Technology

BIOS: A BIOS that supports HT Technology must be enabled

OS: An operating system that supports HT Technology

For more information on Hyper-Threading Technology, go to:

http://www.intel.com/info/hyperthreading

Dimensions (ATX form-factor):

220mm x 235mm ( W x L )

Operating System:

Windows® 2000/ XP

Mainboard PM945GZ

Attention- Im

ortant Information

Follow the procedures below…

Troubleshooting Tips

Refer to other sections in this manual…

Things You Have To Know

0The images and pictures in this manual are for reference only and may vary from the

product you received depending on specific hardware models, third party components

and software versions.

0This mainboard contains very delicate IC chips. Always use a grounded wrist strap

when working with the system.

0Do not touch any IC chip, lead, connector or other components.

0Always unplug the AC power when you install or remove any device on the mainboard

or when confuguring pins and switches.

Packing List

PM945GZ Mainboard

IDE Cable

FDD Cable

SATA Cable

I/O Bracket

SPDIF Card (optional)

PM945GZ Setup Driver CD

Mainboard User Manual CD

Mainboard Quick Installation Guide

Symbols

Mainboard PM945GZ

Table of Contents

CHAPTER 1. GETTING STARTED ..................................................................1

INTRODUCTION....................................................................................................... 1

SPECIFICATION ....................................................................................................... 2

CONFIGURATION .................................................................................................... 5

Layout of PM945GZ ....................................................................................... 5

HARDWARE INSTALLATION ................................................................................... 6

CPU Processor Installation.............................................................................. 6

Memory Installation: DDR2_A1/B1 ............................................................... 7

Back Panel Configuration................................................................................ 9

Connectors..................................................................................................... 11

Front Panel Headers: JPANEL1 .................................................................... 12

Headers & Jumpers........................................................................................ 13

Audio Configuration...................................................................................... 15

Slots ............................................................................................................... 16

Power Supply Attachments............................................................................ 17

CHAPTER 2. BIOS SETUP............................................................................ 18

INTRODUCTION..................................................................................................... 18

MAIN MENU ......................................................................................................... 19

CHAPTER 3: SOFTWARE SETUP ............................................................... 21

SOFTWARE LIST ................................................................................................... 21

SOFTWARE INSTALLATION ................................................................................... 21

CHAPTER 4: TROUBLESHOOTING ............................................................ 24

APPENDIX I: SUPER 5.1 CHANNEL AUDIO EFFECT SETUP.................................... 27

Mainboard PM945GZ

Chapter 1. Getting Started

Introduction

Thanks for choosing PM945GZ Mainboard. It is based on Intel®945GZ Northbridge chipset and Intel®

ICH7 Southbridge chipset. It supports Intel®CoreTM 2 Duo/ Pentium®Extreme Edition/ Pentium®D/

Pentium®4/ Celeron®D Processor with FSB (Front Side Bus) frequencies of 800 MHz/ 533 MHz.

The PM945GZ provides two DIMM (Dual In-Line Memory Modules) sockets which allowing you to install

240-pin, unbuffered non-ECC, DDRII 533/ 400 SDRAMs. It also supports Dual Channel Technology and

allows you installing a total memory capacity of 2 GB.

This mainboard provides one Universal PCI-E interface slot up to x4 mode which is recommended that

insert a graphics card onto the Universal PCI-E slot. In addition, three PCI slots come with this mainboard

and are capable for use with expansion cards.

The PM945GZ provides one floppy disk drive connector that can be used with 360KB/720KB/

1.2MB/1.44MB/2.88MB drives. It also has one IDE connector for IDE hard drives supporting Ultra ATA

66/100. Moreover, the mainboard comes with Serial ATA II feature, four SATA II connectors which the

interfaces can provide the transmit rate up to 3 Gbps.

The onboard AC’ 97 Audio CODEC (ALC655) supports high quality performance 6-channel audio play

(Super 5.1 Channel Audio Effect) <See Appendix I>. The mainboard also supports the Sony/Philips

Digital Interfaces (SPDIF) output function (Optional).

The PM945GZ also comes with an onboard 10/100 Mbps Ethernet LAN chip. There is a LAN port on the

back panel of your case that you can directly plug into an Internet cable.

There are maximal eight USB2.0/ 1.1 ports which can be set up on this mainboard.

All the information (including hardware installation and software installation) in this manual are for

reference only. The contents in this manual may be updated without notice. The company will not assume

any responsibility for any errors or mistakes within.

Mainboard PM945GZ

Specification

CPU:

Support Socket 775

Support Intel®CoreTM 2 Duo/ Pentium®Extreme Edition/ Pentium®D/ Pentium®4/

Celeron®D Processor

Support Hyper-Threading Technology

Support 800 MHz/ 533 MHz FSB (Front Side Bus) Frequencies

Chipset:

Northbridge Chipset – Intel®945GZ

Southbridge Chipset – Intel®ICH7

I/O Controller –ITE®IT8712F-A

AC’ 97 Audio Codec – Realtek®ALC655

LAN Controller – Realtek®RTL 8100C

Memory:

Two DIMM sockets

Supports unbuffered & non-ECC DDRII 533/ 400 SDRAM

Supports a total memory capacity of up to 2 GB

Supports Dual Channel data bus

Onboard AC’ 97 Sound Codec:

High performance Codec with high S/N ratio (>90 db)

Compliant with AC’ 97 2.3 specification

Supports 6-channel playback capability (Super 5.1 Channel Audio Effect)

Supports 3D stereo enhancement

Supports Sony/ Philips Digital Interfaces (S/PDIF) functionality (Optional)

Slots:

One Universal PCI-Express x4 interface slot for graphics card or expansion card

Three PCI interface slots for expansion cards

FDD Connector:

Support to set up to two floppy disk drives

Support 360KB/ 720KB/ 1.2MB/ 1.44MB/ 2.88MB

Mainboard PM945GZ

IDE Connector:

One IDE connectors

Supports up to two IDE devices

Supports Ultra ATA 33/66/100

Supports high capacity hard disk drives

Serial ATA II Connector:

Four SATA II connectors

Supports SATA 2.0 specification and with transmit rate up to 3 Gb/ s

One SATA II connector can only support one SATA II HDD

Onboard LAN Chip:

10/100 Mbps Ethernet LAN supported

I/O facility Connectors

Supports one serial port

Supports one VGA port (=D-Sub)

Supports one PS/2 mouse port and one PS/2 keyboard port

Supports one JPRNT1 header and one JSPDIF_OUT1 header compatible with

external devices connected

Universal Serial Bus:

Four onboard USB 2.0/ 1.1 ports

Two front USB headers come with this mainboard for additional four USB ports

Support a maximum of eight USB ports to connect USB compliant devices

BIOS:

Phoenix-Award™ BIOS

Support APM1.2

Support ACPI 2.0 power management

Green Function:

Supports Phoenix-Award™ BIOS power management function

Supports system-wake-from-power-saving-mode by keyboard or mouse touching

Shadow RAM:

Integrated memory controller provides shadow RAM functionality and supports ROM

BIOS

Mainboard PM945GZ

Flash Memory:

Supports flash memory functionality

Supports ESCD functionality

Hardware Monitor Function:

Monitors CPU/ Chassis Fan Speed

Monitors CPU and system temperature

Monitors system voltages

Watch Dog Timer:

This function is used for detecting the system hangs during the POST stage due to

conflicts resulting from changing the system BIOS settings. Once the problem is

detected, the system will reset the configurations and reboot the system within five

seconds.

Mainboard PM945GZ

Configuration

Layout of PM945GZ

Mainboard PM945GZ

Hardware Installation

This section will assist you in quickly installing your system hardware. Wear a wrist ground strap before

handling components. Electrostatic discharge may damage the system’s components.

CPU Processor Installation

This mainboard supports Intel®CoreTM 2 Duo/ Pentium®Extreme Edition/ Pentium®D/ Pentium®4/

Celeron®D Processor using a Socket 775. Before building your system, we suggest you to visit the Intel

website and review the processor installation procedures. http://www.intel.com

CPU Socket 775 Configuration Steps:

1. Locate the CPU socket 775 on your

mainboard and nudge the lever away

from the socket as shown. Then lift the

lever to a 140-degree angle (A). Next, lift

up the iron cover (B).

2. There are 2 distinctive marks located

near the corners of the socket on the

same side as the lever as shown (C).

Match these marks with the marks on the

CPU and carefully lower the CPU down

onto the socket (D).

3. Replace the iron cover and then lower

the lever until it snaps back into position

(E). This will lock down the CPU (F).

4. Smear thermal grease on the top of the CPU. Lower the CPU

fan onto the CPU/CPU socket and secure it using the

attachments or screws provided on the fan. Finally, attach the

fan power cord to the JCFAN1 header.

Attention

DO NOT touch the CPU pins in case they are damaged. Also, make sure that you

have completed all installation steps before powered on the system. Finally,

double-check that the cooling fan is properly installed and the CPU fan power cord is

securely attached, in case your CPU and other sensitive components are damaged

because of high temperature

Inhaltsverzeichnis

Andere Albatron Hauptplatine Handbücher

Albatron

Albatron PM266A PRO Bedienungsanleitung

Albatron

Albatron PXP35 Bedienungsanleitung

Albatron

Albatron PX915P-2V Bedienungsanleitung

Albatron

Albatron K8M800-754 Series Bedienungsanleitung

Albatron

Albatron PX915PD Series Bedienungsanleitung

Albatron

Albatron PMH55 Bedienungsanleitung

Albatron

Albatron PI960GLE Bedienungsanleitung

Albatron

Albatron PXP43 Bedienungsanleitung

Albatron

Albatron PXP43 Bedienungsanleitung

Albatron

Albatron PX865PE PRO II Bedienungsanleitung

Albatron

Albatron PM915-478 Bedienungsanleitung

Albatron

Albatron PI965GME-M Bedienungsanleitung

Albatron

Albatron PX925XE Series Bedienungsanleitung

Albatron

Albatron PX915-DV Bedienungsanleitung

Albatron

Albatron KM400A series Bedienungsanleitung

Albatron

Albatron KX400-8XV Pro Bedienungsanleitung

Albatron

Albatron KM266 Series Bedienungsanleitung

Albatron

Albatron PI965GME Bedienungsanleitung

Albatron

Albatron PM800 Pro (V2.0) Bedienungsanleitung

Albatron

Albatron PX915P4 Series Bedienungsanleitung

Albatron

Albatron KM400T-8X Series Bedienungsanleitung

Albatron

Albatron PM73V Bedienungsanleitung

Albatron

Albatron K8NF4X-754 Bedienungsanleitung

Albatron

Albatron NForce 650i Ultra Bedienungsanleitung

Beliebte Hauptplatine Handbücher anderer Marken

DFI

DFI SD170 Bedienungsanleitung

ASROCK

ASROCK ROMED8-2T Bedienungsanleitung

Asus

Asus P2L97A Bedienungsanleitung

Winmate

Winmate IC70 Bedienungsanleitung

Asus

Asus MES-B Bedienungsanleitung

Grantech

Grantech SYS8F377VGGA-3OMN Bedienungsanleitung

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Bedienungsanleitung

Texas Instruments

Texas Instruments ADS8372EVM Bedienungsanleitung

Commell

Commell MS-C73 Bedienungsanleitung

Gigabyte

Gigabyte GA-9IVDT Bedienungsanleitung

IBT Technologies

IBT Technologies MB860 Bedienungsanleitung

Nvidia

Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung

Intel

Intel D33217CK Bedienungsanleitung

Asus

Asus F1A55-M LX PLUS R2.0 Bedienungsanleitung

EPC

EPC EPC9147C Bedienungsanleitung

Asus

Asus EX-B760M-V5 D4 Bedienungsanleitung

EPOX

EPOX MU-8KHA0010 Bedienungsanleitung

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Bedienungsanleitung