Albatron PXP965 (V2.0) Bedienungsanleitung

PXP965

All rights are reserved. No part of this publication may be reproduced, transmitted, transcribed, stored

in a retrieval system or translated into any language or computer language, in any form or by any means,

electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written

permission of the company. Brands and product names are trademarks or registered trademarks of their

respective companies.

The vendor makes no representations or warranties with respect to the contents herein and especially

disclaim any implied warranties of merchantability or fitness for any purpose. Further the vendor

reserves the right to revise this publication and to make changes to the contents herein without

obligation to notify any party beforehand. Duplication of this publication, in part or in whole, is not

allowed without first obtaining the vendor’s approval in writing.

Trademark

All the trademarks or brands in this document are registered by their respective owner.

Disclaimer

We make no warranty of any kind with regard to the content of this user’s manual. The content is

subject to change without notice and we will not be responsible for any mistakes found in this user’s

manual. All the brand and product names are trademarks of their respective companies.

FCC Compliance Statement

This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant

to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with the instructions, may cause harmful

interference to radio communications. Operation of this equipment in a residential area is likely to

cause harmful interference in which case the user will be required to correct the interference at his own

expense. However, there is no guarantee that interference will not occur in a particular installation.

CE Mark

The device is in accordance with 89/336 ECC-ENC Directive.

er: EG100

Mainboard PXP965

PXP965

Intel®P965 & ICH8

Support Socket 775 Intel®CoreTM 2 Extreme/ CoreTM 2 Duo/

Pentium®Extreme Edition/ Pentium®4 Extreme Edition/

Pentium®D/ Pentium®4/Celeron®D Processor

User Manual

Enabling the Hyper-Threading Technology, your computer system is

required to have components as the following:

CPU: An Intel®Pentium®4 Processor with HT Technology

Chipset: An Intel®Chipset that supports HT Technology

BIOS: A BIOS that supports HT Technology must be enabled

OS: An operating system that supports HT Technology

For more information on Hyper-Threading Technology, go to:

http://www.intel.com/info/hyperthreading

Dimensions (ATX form-factor):

220mm x 305mm ( W x L )

Operating System:

Windows® 2000/ XP

Mainboard PXP965

Attention- Im

ortant Information

Follow the procedures below…

Troubleshooting Tips

Refer to other sections in this manual…

Things You Have To Know

0The images and pictures in this manual are for reference only and may vary from the

product you received depending on specific hardware models, third party components

and software versions.

0This mainboard contains very delicate IC chips. Always use a grounded wrist strap

when working with the system.

0Do not touch any IC chip, lead, connector or other components.

0Always unplug the AC power when you install or remove any device on the mainboard

or when confuguring pins and switches.

Packing List

PXP965 Mainboard

IDE Cable

FDD Cable

SATA Cable

I/O Bracket

USB 2.0 Cable (optional)

S/PDIF Card (optional)

Setup Driver CD

Mainboard User Manual CD

Mainboard Quick Installation Guide

Symbols

Mainboard PXP965

Table of Contents

CHAPTER 1. GETTING STARTED .................................................... 1

INTRODUCTION....................................................................................................... 1

SPECIFICATION ....................................................................................................... 2

CONFIGURATION .................................................................................................... 5

Layout of PXP965 ........................................................................................... 5

HARDWARE INSTALLATION ................................................................................... 6

CPU Processor Installation.............................................................................. 6

Memory Installation: DDR2_A1/A2/B1/B2.................................................... 7

Back Panel Configuration................................................................................ 9

Connectors ..................................................................................................... 12

Front Panel Headers: JPANEL1 .................................................................... 13

EZ Control Button ......................................................................................... 14

Headers & Jumpers........................................................................................ 15

Audio Configuration...................................................................................... 17

Slots ............................................................................................................... 19

Power Supply Attachments............................................................................ 20

CHAPTER 2. BIOS SETUP ........................................................... 21

INTRODUCTION..................................................................................................... 21

MAIN MENU ......................................................................................................... 22

CHAPTER 3: SOFTWARE SETUP................................................... 24

SOFTWARE LIST ................................................................................................... 24

SOFTWARE INSTALLATION ................................................................................... 24

CHAPTER 4: TROUBLESHOOTING................................................. 27

APPENDIX I: 8/6/4/2 CHANNEL AUDIO EFFECT SETUP......................................... 30

Mainboard PXP965

Chapter 1. Getting Started

Introduction

Thanks for choosing PXP965 Mainboard. It is based on Intel®P965 Northbridge chipset and

Intel®ICH8 Southbridge chipset. It supports Intel®CoreTM 2 Extreme/ CoreTM 2 Duo/ Pentium®

Extreme Edition/ Pentium®4 Extreme Edition/ Pentium®D/ Pentium®4/ Celeron®D

Processor with FSB (Front Side Bus) frequencies of 1066 MHz/ 800 MHz/ 533 MHz.

The PXP965 provides four DIMM (Dual In-Line Memory Modules) sockets which allowing you to

install 240-pin, unbuffered non-ECC, DDRII 800/ 667/ 533 SDRAMs. It also supports Dual

Channel Technology and allows you installing a total memory capacity of 8 GB.

This mainboard provides one PCI-E x16 interface slot up to x16 mode, one PCI-E x4 interface

slot up to x4 mode, and two PCI-E x1 interface slot up to x1 mode can be supported

individually. It is recommended that you can insert a graphics card onto the PCI-E x16 slot,

and an expansion card which the interface is capable for PCI-E x4 and PCI-E x1 specification.

In addition, three PCI slots come with this mainboard and are capable for use with expansion

cards.

The PXP965 provides one floppy disk drive connector that can be used with 360KB/720KB/

1.2MB/1.44MB/2.88MB drives. It also has one IDE connector compatible with PIO Mode

0/1/2/3/4 for IDE hard drives supporting Ultra ATA 33/66/100/133. Moreover, the

mainboard comes with Serial ATA II feature, four SATA II connectors which the interfaces can

provide the transmit rate up to 3 Gbps.

The onboard High Definition Audio CODEC (ALC883) supports high quality performance

8-channel audio play (Super 7.1 Channel Audio Effect) <See Appendix I>. The mainboard

also supports the Sony/Philips Digital Interfaces (SPDIF) input/ output function (Optional).

The PXP965 also comes with an onboard 10/100/1000 Mbps Ethernet LAN chip. There is a LAN

port on the back panel of your case that you can directly plug into an Internet cable.

There are maximal ten USB2.0/ 1.1 ports which can be set up on this mainboard.

Furthermore, one PRINTER header is flexible for extra device by optional cable.

All the information (including hardware installation and software installation) in this manual

are for reference only. The contents in this manual may be updated without notice. The

company will not assume any responsibility for any errors or mistakes within.

Mainboard PXP965

Specification

CPU:

Support Socket 775

Support Intel®CoreTM 2 Extreme/ CoreTM 2 Duo/ Pentium®Extreme Edition/ Pentium®

4 Extreme Edition/ Pentium®D/ Pentium®4/ Celeron®D Processor

Support Hyper-Threading Technology

Support 1066 MHz/ 800 MHz/ 533 MHz FSB (Front Side Bus) Frequencies

Chipset:

Northbridge Chipset – Intel®P965

Southbridge Chipset – Intel®ICH8

I/O Controller –ITE®IT8718F

High Definition Audio Codec – Realtek®ALC883

GB LAN Controller – Realtek®RTL 8110SC

IDE Controller – VIA®VT6410

Memory:

Four DIMM sockets

Supports unbuffered & non-ECC DDRII 800/ 667/ 533 SDRAM

Supports a total memory capacity of up to 8 GB

Supports Dual Channel data bus

Onboard HD Audio Codec (ALC 883):

High performance Codec with high S/N ratio (>90 db)

Compatible with Azalia 1.0 specification

Supports 8/6/4/2 channel playback capability

Supports jack sensing and re-tasking function

Built-in Dolby Digital Live Technology

Supports Sony/ Philips Digital Interfaces (S/PDIF) functionality (Optional)

Slots:

Three PCI-Express interface slots for graphics cards and expansion cards

Mainboard PXP965

1. One PCI-E x16 slot: Supports up to x16 mode

2. One PCI-E x4 slot: Supports up to x4 mode

3. One PCI-E x1 slot: Supports up to x1 mode

Three PCI interface slots for expansion cards

FDD Connector:

Supports one FDD connector to set up to two floppy disk drives

Supports 360KB/ 720KB/ 1.2MB/ 1.44MB/ 2.88MB

IDE Connector:

One IDE connector

Supports up to two IDE devices

Supports Ultra ATA 33/66/100/133

Supports high capacity hard disk drives

Serial ATA II Connector:

Four SATA II connectors

Supports SATA 2.0 specification and with transmit rate up to 3 Gb/ s

One SATA II connector can only support one SATA II HDD

Onboard LAN Chip:

Supports 10/100/1000 Mbps Ethernet LAN

Supports auto negotiation and half/ full duplex capability

I/O facility Connectors

Supports one serial port

Supports one PS/2 mouse port and one PS/2 keyboard port

Supports one JPRNT1 header, one JSPDIF_IN1 header and one JSPDIF_OUT1 header

compatible with external devices connected

Universal Serial Bus:

Six onboard USB 2.0/ 1.1 ports

Two front USB headers come with this mainboard for additional four USB ports

Mainboard PXP965

Support a maximum of ten USB ports to connect USB compliant devices

BIOS:

Phoenix-Award™ BIOS

Support APM 1.2

Support ACPI 2.0 power management

Green Function:

Supports Phoenix-Award™ BIOS power management function

Supports system-wake-from-power-saving-mode by keyboard or mouse touching

Shadow RAM:

Integrated memory controller provides shadow RAM functionality and supports ROM

BIOS

Flash Memory:

Supports flash memory functionality

Supports ESCD functionality

Hardware Monitor Function:

Monitors CPU/ Chassis Fan Speed

Monitors CPU and system temperature

Monitors system voltages

Watch Dog Timer:

This function is used for detecting the system hangs during the POST stage due to

conflicts resulting from changing the system BIOS settings. Once the problem is

detected, the system will reset the configurations and reboot the system within five

seconds.

Mainboard PXP965

Configuration

Layout of PXP965

Mainboard PXP965

Hardware Installation

This section will assist you in quickly installing your system hardware. Wear a wrist ground strap before

handling components. Electrostatic discharge may damage the system’s components.

CPU Processor Installation

This mainboard supports Intel®CoreTM 2 Extreme/ CoreTM 2 Duo/ Pentium®Extreme Edition/ Pentium®4

Extreme Edition/ Pentium®D/ Pentium®4/ Celeron®D Processor using a Socket 775. Before building

your system, we suggest you to visit the Intel website and review the processor installation procedures.

http://www.intel.com

CPU Socket 775 Configuration Steps:

1. Locate the CPU socket 775 on your

mainboard and nudge the lever away

from the socket as shown. Then lift the

lever to a 140-degree angle (A). Next,

lift up the iron cover (B).

2. There are 2 distinctive marks located

near the corners of the socket on the

same side as the lever as shown (C).

Match these marks with the marks on the

CPU and carefully lower the CPU down

onto the socket (D).

3. Replace the iron cover and then lower

the lever until it snaps back into position

(E). This will lock down the CPU (F).

4. Smear thermal grease on the top of the CPU. Lower the CPU

fan onto the CPU/CPU socket and secure it using the

attachments or screws provided on the fan. Finally, attach the

fan power cord to the JCFAN1 header.

Attention

DO NOT touch the CPU pins in case they are damaged. Also, make sure that you have

completed all installation steps before powered on the system. Finally,

double-check that the cooling fan is properly installed and the CPU fan power cord

is securely attached, in case your CPU and other sensitive components are damaged

because of high temperature

Andere Handbücher für PXP965 (V2.0)

Inhaltsverzeichnis

Andere Albatron Hauptplatine Handbücher

Albatron

Albatron PM266A PRO Bedienungsanleitung

Albatron

Albatron PM915-478 Bedienungsanleitung

Albatron

Albatron PX915-DV Bedienungsanleitung

Albatron

Albatron PM 845G Series Bedienungsanleitung

Albatron

Albatron PI945GSE-270 Bedienungsanleitung

Albatron

Albatron PXP43 Bedienungsanleitung

Albatron

Albatron PX865PEL-800 Bedienungsanleitung

Albatron

Albatron PX915P4 Series Bedienungsanleitung

Albatron

Albatron PX915P-2V Bedienungsanleitung

Albatron

Albatron PX865PE PRO II Bedienungsanleitung

Albatron

Albatron PMH55 Bedienungsanleitung

Albatron

Albatron KM400TA Series Bedienungsanleitung

Albatron

Albatron PI960GLE Bedienungsanleitung

Albatron

Albatron PX848PV Series Bedienungsanleitung

Albatron

Albatron PXP43 Bedienungsanleitung

Albatron

Albatron K8X250GB PRO Bedienungsanleitung

Albatron

Albatron P4M800 Pro Bedienungsanleitung

Albatron

Albatron PX915-SLI Bedienungsanleitung

Albatron

Albatron PX865PEL-800 Bedienungsanleitung

Albatron

Albatron KX18DS PRO II Bedienungsanleitung

Albatron

Albatron PM73V Bedienungsanleitung

Albatron

Albatron K8X890 Series Bedienungsanleitung

Albatron

Albatron KM51G-754 Bedienungsanleitung

Albatron

Albatron PX865PE Series Bedienungsanleitung

Beliebte Hauptplatine Handbücher anderer Marken

DFI

DFI SD170 Bedienungsanleitung

ASROCK

ASROCK ROMED8-2T Bedienungsanleitung

Asus

Asus P2L97A Bedienungsanleitung

Winmate

Winmate IC70 Bedienungsanleitung

Asus

Asus MES-B Bedienungsanleitung

Grantech

Grantech SYS8F377VGGA-3OMN Bedienungsanleitung

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Bedienungsanleitung

Texas Instruments

Texas Instruments ADS8372EVM Bedienungsanleitung

Commell

Commell MS-C73 Bedienungsanleitung

Gigabyte

Gigabyte GA-9IVDT Bedienungsanleitung

IBT Technologies

IBT Technologies MB860 Bedienungsanleitung

Nvidia

Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung

Intel

Intel D33217CK Bedienungsanleitung

Asus

Asus F1A55-M LX PLUS R2.0 Bedienungsanleitung

EPC

EPC EPC9147C Bedienungsanleitung

Asus

Asus EX-B760M-V5 D4 Bedienungsanleitung

EPOX

EPOX MU-8KHA0010 Bedienungsanleitung

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Bedienungsanleitung