Albrecht Tectalk Smart + Series Bedienungsanleitung

Tectalk Smart + Series

User Manual

Contents

Safety Warning............................................ 3

Equipment and Accessories Supplied ......... 3

Powering the Transceiver............................ 4

Installation the Batteries .............................. 4

Charge Information...................................... 5

LCD-Display ................................................ 5

Control Buttons............................................ 6

Power – On/-Off.................................... 6

PTT-Button (Push-To-Talk) .................. 6

Up-Button ............................................. 7

Down-Button......................................... 7

Operating Modes and Features................... 7

PMR-Operation..................................... 7

Channel-Selection ................................ 8

CTCSS-Mode ....................................... 8

VOX Mode............................................ 8

Roger Beep .......................................... 9

Button Beep........................................ 10

Call Ringer.......................................... 10

Keypad Lock....................................... 10

Channel Scan Operation .................... 11

Battery Alert........................................ 11

Background illumination ..................... 11

Notes for good Communication ................. 12

Warning ..................................................... 12

Troubleshooting......................................... 12

Technical Specifications ............................ 13

Frequency Table ....................................... 13

CTCSS Tone Subcode Table .................... 14

Service Hints and Documentation ............. 14

European 2 years warranty ....................... 15

CE Declaration .......................................... 16

Thank you for purchasing this Albrecht radio.

All our products are built to offer excellent value for money by

combining advanced features, great design and manufacturing

quality. To ensure you are familiar with the operation and features

of your radio and in order to obtain the best performance, please

read this manual carefully before operation.

Safety Warning

Never attempt to use or charge alkaline or dry cell batteries, as

batteries may burst causing personal injury and damage to the

product. When recharging Nickel Metal Hydride (NiMH) batteries

with the supplied Albrecht-charger or wall adapter, use only the

supplied or Albrecht-approved rechargeable NiMH batteries. Use of

the Albrecht-charger with other brands of accumulators is not

recommended, as accumulator charging times will vary with

different brands. Avoid placing the Tectalk Smart+ PMR

transceiver for prolonged periods of time in direct sunlight or

temperatures below –20°C or above 60°C. Keep the antenna at

least 2,5cm away from your head and body. Do not use your

Tectalk Smart+ with a damaged antenna. Place the rubber covers

on the jacks when not in use.

Equipment and Accessories Supplied

2 Radios

Instruction Manual

Double stand charger

230 V wall adapter

2 headset / microphone combinations

2 x 3 pcs rechargeable NiMH batteries

Please note that the supplied headsets are not designed for motor

bike communication!

Powering the transceiver

Your Tectalk Smart+ R1 PMR 446 transceiver operates on three

AAA size rechargeable NIMH batteries. (Non-Rechargeable

Alkaline Batteries shall not be used, because Alkaline batteries

do not meet the requirements for keeping the maximum output

power more stable for the whole operating time). The charging time

is typically 12-15 hours. You can charge one or both radios at the

same time with the supplied desk charging cradle. It is also

possible to charge one radio by inserting the charge cable into the

Charge / Headset socket.

Installation of the batteries

Battery installation is made more convenient when the belt clip is

either rotated left or right to the horizontal position, or is removed.

simply rotate the clip in either direction to the horizontal position. Be

careful not to use excessive force. To remove the clip, press down

on the spring release tab and pull the clip straight out from the radio

body.

1. Using thumb, press down on battery cover at arrow and slide

cover down.

2. Then lift cover at bottom to open. Remove cover.

3. Insert three AAA NiMH batteries (positive (+) end toward the

top beginning at left side and alternating positive terminals as

shown).

Charge Information

For charging of rechargeable batteries, only the supplied CE-

approved AC adaptor shall be used in compliance with the

following specifications:

* INPUT : AC 230V 50Hz 30mA

* OUTPUT : DC 6V 200mA

Do not operate the radio during battery charging !

LCD-Display:

Control Buttons

(1) Power on-off Button

Press and hold the POWER on/off button for at least 2

seconds. You will hear a confirming melody to indicate

the unit is on. To turn the unit off, press and hold the

button for at least 2 seconds.

(2) Push-To-Talk (PTT) Button

Pressing and holding this button will allow you to speak

to any transceiver that is set to the same channel and

privacy code setting as yours. Hold the transceiver

approximately 5-6 cm from your mouth as you speak

into the built in microphone. After you have finished speaking,

release the PTT Button to allow reception of incoming signals.

Whenever the button is pressed, the transmit icon ( ) will appear.

When receiving an incoming signal, the Recieve ( ) icon will

appear. The PTT button can also be used as a two-way call ringer.

Pressing the button twice quickly will call another party on the same

channel.

(3) Up Button

In the standby mode, pressing this button will increase

the listening volume. The current volume is indicated (1-

7). When in function edit mode this button will be used to

adjust the unit's settings.

(4) Down Button

In the standby mode, pressing this button will decrease

the listening volume. When in function edit mode this

button will be used to adjust the unit's settings.

Operating Modes and Features

PMR Operation

• Press and hold the POWER On/Off button for 2 seconds to turn

on power.

• Press the MODE button so the channel number flashes.

• Select the desired channel with the Up and Down Buttons. The

Recieve icon ( ) appears to indicate an incoming call.

• Press and hold the PTT button to transmit, then speak into the

microphone clearly and slowly. The transmit icon ( ) appears

on the display while the button is pressed.

• Release PTT button to receive.

• Communication can only be accomplished when the channel

and CTCSS tone frequency of at least two parties are the

same.

• The CTCSS subcode (01-38) will be displayed on the LCD

panel if the CTCSS tone frequency function is enabled (not oF).

Channel Selection

• From standby mode, press the MODE button once; the channel

number flashes.

• Press the Up or down button briefly to move to the desired

channel number.

• Press the PTT button momentarily to confirm selection.

CTCSS Mode (Sub-Code) Selection

• From standby mode, press the MODE Button twice; a flashing

oF or sub-code number is displayed.

• Press the Up or Down button to select the desired sub-code for

use (01-38).

• Press the PTT button to confirm selection.

• The CTCSS mode can be turned off by selecting oF as the

setting.

NOTE : To communicate with other PMR radios, all radios in Your

network must be switched to the same channel and CTCSS

subcode. To communicate with other PMR units that do not have

subcodes, switch your unit to the same channel with the subcode

set to oF. The CTCSS subcodes do not prevent others from

hearing your transmissions. This will only allow you to ignore all

traffic on a given channel not using the same subcode.

VOX Mode Selection

When your voice or signal is detected using the internal or external

microphone/headset the radio transmits automatically without the

need to press the PTT button. Note: Not all available external

microphone/headsets on the market are designed to be used under

VOX control and PTT as well!

To enable the VOX operation:

• From standby mode, press the MODE button 3 times unitil the

VOX icon (vox) appears with on or oF.

• Press the Up or Down button to select the VOX on or oF as

desired.

• When enabled, the VOX icon ( ) appears.

• Press the PTT button momentarily to confirm selection.

Roger Beep Tone

The Roger Beep is a tone which is automatically transmitted

whenever the PTT button is released.

To enable and disable the Roger Beep tone:

• From standby mode, press the MODE Button 4 times unitil the

flashing Roger Beep icon ( ) appears with on or oF.

• Press the Up or Down Button to select the tone on or off as

desired.

• When enabled, the Roger beep icon ( ) appears.

• Press the PTT button momentarily to confirm selection.

Button Beep (keytone)

This feature allows the transceiver to sound a confirmation tone

whenever the following keys are pressed: Power On/Off/Scan

Button, Up/Down Buttons and MODE Button.

To enable and disable the keytone:

• From standby mode, press the MODE Button 5 times unitil the

flashing keytone icon ( )appears with on or oF.

• Press the Up or Down Button to select the tone on or off as

desired.

• When enabled, the keytone icon ( ) appears.

• Press the PTT button momentarily to confirm selection.

Call Ringer

The transceiver provides a transmit call ring melody to alert other

users of an incoming call. From standby mode, pressing the PTT

button twice in quick succession will transmit the call ringer melody.

To select the call ringer tone :

• From standby mode, press the MODE Button 6 times unitil the

Call Ringer tone number flashes.

• Press the Up or Down Button to select the one tone out of 3

tones.

• Press the PTT button momentarily to confirm selection.

Keypad Lock

The lock function is to avoid the accidental changes of radio

settings. Only POWER On/Off, the PTT and Volume Up/Down

buttons will operate while lock function is enabled.

To set the keypad lock operation :

• From standby mode, press and hold the MODE button for 2

seconds or until the lock icon ( ) appears on the display.

• To disable the lock operation, press and hold the MODE button

for at least 2 seconds ; the lock icon ( ) will disappear

Note: while the SCAN mode is active, the MODE button is

disabled. Please note that the SCAN mode will reduce the overall

battery life since the battery save function cannot be used during

scanning.

Channel Scan Operation

This feature allows you to monitor all channels automatically for

valid signals. While scanning, you can transmit and receive. When

Inhaltsverzeichnis

Andere Albrecht Zwei-Wege-Funkgerät Handbücher

Albrecht

Albrecht ATT 200 Bedienungsanleitung

Albrecht

Albrecht Tectalk Action Pro Bedienungsanleitung

Albrecht

Albrecht Tectalk Pro-XL Bedienungsanleitung

Albrecht

Albrecht Tectalk Bedienungsanleitung

Albrecht

Albrecht tectalk easy Bedienungsanleitung

Albrecht

Albrecht Tectalk PRO-R1 PMR446 Bedienungsanleitung

Albrecht

Albrecht Tectalk Pro Bedienungsanleitung

Albrecht

Albrecht PMR 446 Bedienungsanleitung

Albrecht

Albrecht Tectalk Float 2 Bedienungsanleitung

Albrecht

Albrecht Tectalk Easy 3 Bedienungsanleitung

Albrecht

Albrecht Tectalk Worker 3 Bedienungsanleitung

Albrecht

Albrecht Sporty-Fun Bedienungsanleitung

Albrecht

Albrecht Tectalk Action Bedienungsanleitung

Albrecht

Albrecht PMR 446 Bedienungsanleitung

Albrecht

Albrecht PMR 446 Bedienungsanleitung

Albrecht

Albrecht Tectalk Bedienungsanleitung

Albrecht

Albrecht Froggy Bedienungsanleitung

Albrecht

Albrecht PMR 446 Bedienungsanleitung

Albrecht

Albrecht Tectalk Easy 2 Bedienungsanleitung

Albrecht

Albrecht PMR 446 Bedienungsanleitung

Albrecht

Albrecht AE 201 S Bedienungsanleitung

Albrecht

Albrecht Tectalk Bedienungsanleitung

Albrecht

Albrecht Tectalk Worker 2 Bedienungsanleitung

Albrecht

Albrecht TELME-T Bedienungsanleitung

Beliebte Zwei-Wege-Funkgerät Handbücher anderer Marken

Midland

Midland 70-1526A/B Bedienungsanleitung

HYT

HYT TC700 Bedienungsanleitung

DNT

DNT Space100 Bedienungsanleitung

Legacy

Legacy ProLine Series Bedienungsanleitung

Evolveo

Evolveo FreeTalk XM2-2 Bedienungsanleitung

AWC

AWC AWR1688+ Bedienungsanleitung

Motorola

Motorola XT665d Bedienungsanleitung

Cobra

Cobra 2-Way Radio Bedienungsanleitung

Klutch

Klutch KR-400 Bedienungsanleitung

Garmin

Garmin Rino 655t Bedienungsanleitung

Motorola

Motorola TLK 150 Bedienungsanleitung

Midland

Midland MXT275J Bedienungsanleitung

Titan

Titan TR200 Bedienungsanleitung

Cobra

Cobra CXT645 Bedienungsanleitung

Tait

Tait TM9100 Bedienungsanleitung

Yaesu

Yaesu FT-65R Bedienungsanleitung

Motorola

Motorola ASTRO SRX 2200 Series Bedienungsanleitung

Motorola

Motorola T5583 Bedienungsanleitung