Alcatel TEMPORIS IP 200 Bedienungsanleitung

Home

PBXware

SERVERware

TELCOware

SIPmon

SIPProt

Desktop & Mobile

BRM

UADs

Appliances

EOL

From Bicom Systems Wiki

Contents

1 Introduction

■

2 Requirements

■

2.1 Identifying phone model

■

2.2 Phone firmware

■

2.3 DHCP server

■

2.4 PBXware version

■

3 Installation

■

3.1 Power adapter

■

3.2 Power over Ethernet (PoE)

■

3.3 Find the phone IP address

■

3.4 Reset to factory settings

■

4 Registering phone

■

4.1 Manual configuration

■

4.2 Auto Provisioning

■

Introduction

This Configuration Guide is written as general guide on how to configure the Alcatel phone

model IP200 to work with PBXware 4.1.

Requirements

Identifying phone model

To start and successfully complete registration of your Alcatel phone you need to know which

phone model you will setup.

From the back of each Alcatel phone there are exact model information that you should check.

Although different phone models can have exactly the same requirements and installation

procedure, phone models can also have significantly different requirements and installation

procedure, so that ignorance of your own model may result in the inability to successfully set up

your phone.

Phone firmware

Make sure that your phone is loaded with appropriate firmware version,13.70.0.144.

■

To find out the firmware version of your Alcatel phone model open a new browser window and

■

enter your phone IP address in order to access the phone web administration interface login

screen. Example: http://192.168.1.22.

■

factory default login details are username: admin and password: admin.

DHCP server

Fully configured and operational DHCP server.

PBXware version

PBXware version 4.1.2.0

In order to find out the PBXware version:

■

Navigate to Settings: About.

■

On the top of About page is a code similar to this one PBXware Edition: Business, Release:

4.1.2.0 (387597b7), Running: 1.8.32.1-gc-b47edc45, PBXware Proxy v4.1.2 (62b7bcd),

API: 4.1, libmemcached version: 1.0.14, where Release denotes the exact version of your

PBXware.

Installation

This chapter describes how to install and connect the phone to the electrical power and data

network as well as how to apply factory settings.

The following topics are covered:

Power adapter

■

Power over Ethernet (PoE)

■

Factory Settings

■

Power adapter

Connect the Network and Power

Connect the DC plug on the power adapter to the DC port on the phone and connect the other

■

end of the power adapter into an electrical power outlet.

Connect the ethernet cable between the Internet port on the phone and the network port on a

■

router or switch to access LAN.

NOTE: If you are using Power over Ethernet (PoE), you don't need to connect the AC adapter.

Make sure the Ethernet cable and router or switch is Power over Ethernet (PoE) compliant.

Power over Ethernet (PoE)

Connect the Network (only)

Using a regular ethernet cable, your phone can be powered from a Power over Ethernet (PoE)

compliant router or switch.

Connect the Ethernet cable between the Internet port on the phone and an available port on

■

the in-line power router or switch.

NOTE: If you are using Power over Ethernet (PoE), you don't need to connect the AC adapter.

Make sure the Ethernet cable and router or switch is Power over Ethernet (PoE) compliant.

Find the phone IP address

Find out your Alcatel phone IP Address.

Press OK button.

■

The IP address will be displayed on the top of display..

Reset to factory settings

This step is not required for brand new out-of-the-box phones, however, if the phone has been

already used then it is a must.

Hold the OK button for 6 seconds.

■

Press OK softkey to confirm. Phone will be reset to the factory settings and reboot.

■

Wait sometime prior for device to reboot.

■

NOTE: Do not unplug or remove power to the phone while it is updating firmware and

configurations.

Registering phone

This chapter describes how to identify Alcatel phone model, requirements that must be met and

how to register the phone using manual configuration or auto provisioning.

The following topics are covered:

Manual configuration

■

Auto provisioning

■

Manual configuration

This chapter describes how to set UAD settings, create PBXware extension and register the

phone.

The following topics are covered:

UAD settings

■

Creating extension

■

Registering phone

■

UAD Settings

UAD settings

Open a new browser window and enter the IP address in order to access the PBXware web

■

administration login screen. Example: http://192.168.1.10.

■

UAD settings

Navigate to Settings:UAD.

■

Make sure Alcatel UAD is enabled. To check the UAD status click on the edit icon

■

corresponding to your Alcatel phone.

Make sure Status is set to Active, Auto provisioning is set to No, and DHCP is set to Yes.

■

Click on the Save button to save changes.

■

Creating extension

Creating Extension

Add Extension

Navigate to Extensions. Click on Add Extension.

■

The standard options window will be shown below.

■

Select Alcatel phone model from the UAD select box.

■

Select Location: Local or Remote.

■

Local is for all extensions registered on the LAN and Remote is for all extensions

registered from remote networks, WAN, Internet etc.

Click on the Next step button.

■

Extension values

Enter values into the required field text boxes.

REQUIRED FIELDS:

Name

■

Enter a name for the extension being created. Example: John Smith.

E-mail

■

Enter the e-mail address associated with this extension. This e-mail address will receive all

system notification messages. Example: [email protected]

Department

■

Department to which extension will belong to. Example: Sales.

Click on the Save button.

■

Registering Phone

This chapter describes how to register Alcatel phone using Hostname or IP Address.

Hostname or IP Address

Open a new browser window and enter your phone IP address in order to access the phone

■

web administration interface login screen. Example: http://192.168.1.22

■

factory default login details are username: admin and password: admin.

Click on Account.

■

Enter or set the following details into the respective fields.

■

REQUIRED FIELDS:

Enable account

■

Make sure the On check box is selected.

Label

■

PBXware extension user name. Example: John

Display Name

■

Usually the same number as the Register Name.

■

PBXware extension number. Example 1003.

User Name

■

PBXware extension number. Example 1003.

Password

■

The Secret of the extension as received in the e-mail associated with this extension.

Example: _%Z4M3*Ts9y7. A password is generated automatically for each newly created

extension.

SIP Server

■

Enter the Hostname or IP Address of the PBXware.

- Example for Hostname: voip.bicomsystems.com

- Example for IP Address: 192.168.1.10

Click on the Confirm button at the bottom of the page.

■

If everything is done as above described, you should have successfully registered your phone

■

to PBXware. Dial *123 to verify registration.

Auto Provisioning

This chapter describes how to set UAD settings, create PBXware extension and register the

phone using DHCP or Static IP address.

The following topics are covered:

UAD Settings

■

Creating Extension

■

Registering Phone

■

UAD Settings

UAD settings

Open a new browser window and enter the IP address in order to access the PBXware web

■

administration login screen. Example: http://192.168.1.10.

■

UAD settings.

Navigate to Settings:UAD.

■

Make sure Alcatel UAD is enabled. To check the UAD status click on the edit icon

■

corresponding to your Alcatel phone.

Make sure Status is set to Active, Auto provisioning is set to Yes, and DHCP is set to Yes.

■

Click on the Save button to save changes.

■

Creating Extension

Add Extension

Navigate to Extensions. Click on Add Extension.

■

The standard options window will be shown below.

■

Select Alcatel phone model from the UAD select box.

■

Select Location: Local or Remote.

■

Local is for all extensions registered on the LAN and Remote is for all extensions

registered from remote networks, WAN, Internet etc.

Click on the Next step button.

■

Extension values

Enter values into the required field text boxes.

REQUIRED FIELDS:

Name

■

Enter a name for the extension being created. Example: John Smith.

E-mail

■

Enter the e-mail address associated with this extension. This e-mail address will receive all

system notification messages. Example: [email protected]

Auto Provisioning

■

Set to Yes.

MAC Address

■

Enter Alcatel phone MAC address. Example: 001565FF1536. MAC address can be found

at the back of the phone.

Click on the Save button.

■

Registering Phone

This chapter describes how to register Alcatel phone using DHCP, TFTP or HTTP & HTTPS.

DHCP

Configure DHCP

Make sure your DHCP router is configured to use option 66 to automatically instruct phones

■

with the URL for auto provisioning. For more information refer to your router documentation

or contact your network administrator.

Phone first boot or user initiated reboot

Auto provisioning process will start during phone first boot or after reboot process has been

■

initiated by user. DHCP server will instruct the phone where from to pickup appropriate

configuration file. If everything is done as above described, you should have successfully

registered your phone to PBXware. Dial *123 to verify registration.

TFTP or HTTP & HTTPS

Open a new browser window and enter your phone IP address, e.g. http://192.168.1.22.

■

Enter username and password and press Confirm button. NOTE: Factory default login

■

details are username: admin and password: admin.

Click on Upgrade tab.

■

Click on Advanced link in the submenu.

■

Choose what server type you intend to use: HTTP, HTTPS and Trivial FTP. NOTE: Our

■

recommendation is to use the HTTP.

Enter http:// or https:// followed by Hostname or IP Address, followed then by

/prov in the Provisioning Server field.

Example for Hostname using HTTP: http://abc.bicomsystems.com/prov

Example for Hostname using HTTPS: https://abc.bicomsystems.com/prov

Example for IP Address using HTTP: http://192.168.1.10/prov

Example for IP Address USING HTTPS: https://192.168.1.10/prov

Enter Auto Provisioning username and password into User Name and Password fields.

■

If you choose to use TFTP enter tftp:// followed by Hostname or IP Address

Example for Hostname: https://voip.bicomsystems.com

Example for IP Address: tftp://192.168.1.10

Click on Confirm button at the bottom of the page.

■

Click on Auto provision button.

■

Andere Handbücher für TEMPORIS IP 200

Inhaltsverzeichnis

Andere Alcatel IP-Telefon Handbücher

Alcatel

Alcatel Forum IPhone 710 Bedienungsanleitung

Alcatel

Alcatel Conference IP1850 Bedienungsanleitung

Alcatel

Alcatel Temporis IP100 Bedienungsanleitung

Alcatel

Alcatel IP1020P Service-Handbuch

Alcatel

Alcatel Temporis IP 600 Bedienungsanleitung

Alcatel

Alcatel Alcatel 8 Series IPTouch 4068 Bedienungsanleitung

Alcatel

Alcatel OmniPCX Enterprise 4039 Bedienungsanleitung

Alcatel

Alcatel 8012 Bedienungsanleitung

Alcatel

Alcatel TEMPORIS IP 200 Service-Handbuch

Alcatel

Alcatel Temporis 06 Bedienungsanleitung

Alcatel

Alcatel OmniStack 8008 Gebrauchsanweisung

Alcatel

Alcatel 8038 Gebrauchsanweisung

Alcatel

Alcatel SP-R5200 Anleitung zur Verwendung

Alcatel

Alcatel Advanced Reflexes Bedienungsanleitung

Alcatel

Alcatel OmniOCX 4018 Bedienungsanleitung

Alcatel

Alcatel Omni Enterprise 8028 Bedienungsanleitung

Alcatel

Alcatel Voice over WLAN (R1.1.1) Leitfaden

Alcatel

Alcatel IP15 Bedienungsanleitung

Alcatel

Alcatel 4028 Bedienungsanleitung

Alcatel

Alcatel IP Touch 4038 Bedienungsanleitung

Alcatel

Alcatel Alcatel 8 Series IPTouch 4068 Bedienungsanleitung

Alcatel

Alcatel IP30 Bedienungsanleitung

Alcatel

Alcatel OmniPCX Office Easy Reflexes Bedienungsanleitung

Alcatel

Alcatel T30 Bedienungsanleitung

Beliebte IP-Telefon Handbücher anderer Marken

Polycom

Polycom Polycom VVX 600 Bedienungsanleitung

Polycom

Polycom SoundPoint IP 450 Bedienungsanleitung

Cisco

Cisco SPA-500 Series Bedienungsanleitung

Polycom

Polycom SoundPoint IP 650 Bedienungsanleitung

Proximus

Proximus Maestro 3016 IP Bedienungsanleitung

Fanvil

Fanvil X4 Bedienungsanleitung

Cisco

Cisco 7962 Bedienungsanleitung

Snom

Snom 320 Bedienungsanleitung

Yealink

Yealink Yealink SIP-T46G Bedienungsanleitung

Avaya

Avaya 4625SW Bedienungsanleitung

Yealink

Yealink SIP-T52S Bedienungsanleitung

Nortel

Nortel 1140E Bedienungsanleitung

Nexotek

Nexotek NT-P500 Bedienungsanleitung

Avaya

Avaya Integral 5 R3.0 Bedienungsanleitung

GE 28320EE2 - Dect 6.0 InfoLink 2 Bedienungsanleitung

Avaya

Avaya 4600 Series Service-Handbuch

Mitel

Mitel MIVOICE OFFICE 400 6940 SIP Bedienungsanleitung

Nortel

Nortel i2050 Bedienungsanleitung