Alcatel Office 1350 Combo Bedienungsanleitung

Andere Handbücher für Office 1350 Combo

Inhaltsverzeichnis

Andere Alcatel Telefon Handbücher

Alcatel

Alcatel TEMPORIS 300 Bedienungsanleitung

Alcatel

Alcatel OT 512 Bedienungsanleitung

Alcatel

Alcatel Easy Reflexes Bedienungsanleitung

Alcatel

Alcatel Omni Enterprise 4008 Bedienungsanleitung

Alcatel

Alcatel TEMPORIS 580 Bedienungsanleitung

Alcatel

Alcatel Temporis 880 Bedienungsanleitung

Alcatel

Alcatel Easy Reflexes Bedienungsanleitung

Alcatel

Alcatel OmniPCX Enterprise 4038 Bedienungsanleitung

Alcatel

Alcatel Premium Reflexes Bedienungsanleitung

Alcatel

Alcatel 4035 Bedienungsanleitung

Alcatel

Alcatel Omni Office/OXO Connect 4028 Gebrauchsanweisung

Alcatel

Alcatel temporis 5000 Bedienungsanleitung

Alcatel

Alcatel MY FLIP 2 Bedienungsanleitung

Alcatel

Alcatel Temporis 150 Bedienungsanleitung

Alcatel

Alcatel 4034 Bedienungsanleitung

Alcatel

Alcatel 4028 Bedienungsanleitung

Alcatel

Alcatel TEMPORIS 22 Bedienungsanleitung

Alcatel

Alcatel T56 Bedienungsanleitung

Alcatel

Alcatel ONE TOUCH 320 Bedienungsanleitung

Alcatel

Alcatel OmniPCX Office Mobile 100 Bedienungsanleitung

Alcatel

Alcatel Alcatel 2410 Bedienungsanleitung

Alcatel

Alcatel E130 Bedienungsanleitung

Alcatel

Alcatel TMAX 20 Bedienungsanleitung

Alcatel

Alcatel OmniPCX Office Bedienungsanleitung

Beliebte Telefon Handbücher anderer Marken

GE 2-9480 Bedienungsanleitung

Geemarc

Geemarc PHOTOPHONE 155 Bedienungsanleitung

Interquartz

Interquartz Gemini IQ333 Bedienungsanleitung

SSS Siedle

SSS Siedle HT 840-0 Bedienungsanleitung

Motorola

Motorola TITANIUM Bedienungsanleitung

Panasonic

Panasonic ICX Bedienungsanleitung

LG H870DS Bedienungsanleitung

Samsung

Samsung GT-I9500 Bedienungsanleitung

AT&T

AT&T Trimline 205 Bedienungsanleitung

Selta

Selta zenyth 600 Bedienungsanleitung

Doro

Doro AFTI 20 Bedienungsanleitung

UNIQCELL

UNIQCELL A1 Bedienungsanleitung

Jabra

Jabra SP5050 - Bluetooth hands-free Speakerphone Bedienungsanleitung

BT Decor 425 Bedienungsanleitung

NEC

NEC SV8500 Bedienungsanleitung

Teledex

Teledex PEARL Bedienungsanleitung

Ericsson

Ericsson Dialog 3213 Bedienungsanleitung

Yealink

Yealink VP530 Bedienungsanleitung

Trim size: 148mm(W) x 210mm Office 1350 Combo_Eng_Cover Trim size: 148mm(W) x 210mm Office 1350 Combo_Eng_P1 Trim size: 148mm(W) x 210mm Office 1350 Combo_Eng_P2_Content Trim size: 148mm(W) x 210mm P3 Trim size: 148mm(W) x 210mm P4 Trim size: 148mm(W) x 210mm P5 Trim size: 148mm(W) x 210mm P6 Trim size: 148mm(W) x 210mm P7 Trim size: 148mm(W) x 210mm P8 Trim size: 148mm(W) x 210mm P9

Trim size: 148mm(W) x 210mm P10 Trim size: 148mm(W) x 210mm P11 Trim size: 148mm(W) x 210mm P12 Trim size: 148mm(W) x 210mm P13 Trim size: 148mm(W) x 210mm P14 Trim size: 148mm(W) x 210mm P15 Trim size: 148mm(W) x 210mm P16 Trim size: 148mm(W) x 210mm P17 Trim size: 148mm(W) x 210mm P18 Trim size: 148mm(W) x 210mm P19

Trim size: 148mm(W) x 210mm P20 Trim size: 148mm(W) x 210mm P21 Trim size: 148mm(W) x 210mm P22 Trim size: 148mm(W) x 210mm P23 Trim size: 148mm(W) x 210mm P24 Trim size: 148mm(W) x 210mm P25 Trim size: 148mm(W) x 210mm P26 Trim size: 148mm(W) x 210mm 27 Trim size: 148mm(W) x 210mm P28 Trim size: 148mm(W) x 210mm P29

Trim size: 148mm(W) x 210mm P30 Trim size: 148mm(W) x 210mm P31 Trim size: 148mm(W) x 210mm P32 Trim size: 148mm(W) x 210mm P33 Trim size: 148mm(W) x 210mm P34 Trim size: 148mm(W) x 210mm P35 Trim size: 148mm(W) x 210mm P36 Trim size: 148mm(W) x 210mm P37 Trim size: 148mm(W) x 210mm P38 Trim size: 148mm(W) x 210mm P39

Trim size: 148mm(W) x 210mm P40 Trim size: 148mm(W) x 210mm P41 Trim size: 148mm(W) x 210mm P42 Trim size: 148mm(W) x 210mm P43 Trim size: 148mm(W) x 210mm P44 Trim size: 148mm(W) x 210mm P45 Trim size: 148mm(W) x 210mm P46 Trim size: 148mm(W) x 210mm P47 Trim size: 148mm(W) x 210mm P48 Trim size: 148mm(W) x 210mm P49

Trim size: 148mm(W) x 210mm P50 Trim size: 148mm(W) x 210mm P51 Trim size: 148mm(W) x 210mm P52 Trim size: 148mm(W) x 210mm P53 Trim size: 148mm(W) x 210mm P54 Trim size: 148mm(W) x 210mm P55 Trim size: 148mm(W) x 210mm P56 Trim size: 148mm(W) x 210mm P57 Trim size: 148mm(W) x 210mm P58 Trim size: 148mm(W) x 210mm P59

2 3 4 5 6 7 98 10

12 13 14 15 16 17 1918 20

29 30

2221

23 24 25 26 27 28

39 40

33 34 35 36 37 38

49 50

4241 43 44 45 46 47 48

59 60

5251 53 54 55 56 57 58

3231

1 IMPORTANT SAFETY INSTRUCTIONS ............................................................... 5

2 INSTALLING YOUR PHONE ................................................................................. 7

2.1 CONNECTING THE CORDED BASE STATION .................................................... 7

2.2 INSTALLING THE CORDLESS HANDSET AND CHARGING THE BATTERIES .. 8

3 GETTING TO KNOW YOUR PHONE ..................................................................... 9

3.1 OVERVIEW OF THE HANDSET ............................................................................ 9

3.2 DISPLAY ICONS AND SYMBOLS OF CORDLESS PHONE ................................ 10

3.3 CORDED BASE STATION .....................................................................................11

3.4 CORDED BASE LCD DISPLAY ............................................................................ 13

4 USING YOUR PHONE ........................................................................................... 14

4.1 MAKE A CALL ....................................................................................................... 14

4.2 ANSWER A CALL ..................................................................................................14

4.3 END A CALL ..........................................................................................................15

4.4 ADJUST EARPIECE AND HANDSFREE VOLUME .............................................. 15

4.5 MUTE A CALL ....................................................................................................... 15

4.6 TURN OFF THE HANDSET RINGER ................................................................... 15

4.7 TURN ON THE KEYPAD LOCK ............................................................................ 15

4.8 REDIAL THE LAST NUMBER ............................................................................... 15

4.9 MAKE AN EXTERNAL CALL .................................................................................16

4.10 ANSWER A CALL ..................................................................................................17

4.11 END A CALL ..........................................................................................................17

4.12 ADJUST EARPIECE AND HANDSFREE VOLUME .............................................. 17

4.13 MUTE A CALL ....................................................................................................... 17

4.14 EMERGENCY CALL WITHOUT MAIN POWER ................................................... 18

4.15 REDIAL ..................................................................................................................18

4.16 FIND THE HANDSET ............................................................................................ 19

4.17 MAKE AN INTERNAL CALL ..................................................................................19

5 PRIVATE PHONEBOOK ....................................................................................... 22

5.1 ADD A NEW PHONEBOOK ENTRY ..................................................................... 22

5.2 SEARCH A PHONEBOOK ENTRY ....................................................................... 22

5.3 VIEW A PHONEBOOK ENTRY ............................................................................. 22

5.4 EDIT A PHONEBOOK ENTRY .............................................................................. 23

5.5 DELETE A PHONEBOOK ENTRY ........................................................................ 23

5.6 DELETE ALL PHONEBOOK ENTIRES ................................................................ 23

5.7 CHECK THE PHONEBOOK USAGE..................................................................... 23

5.8 ADD A NEW ENTRY ............................................................................................. 24

5.9 EDIT AN ENTRY ................................................................................................... 24

5.10 VIEW AN ENTRY .................................................................................................. 25

5.11 DELETE AN ENTRY ..............................................................................................25

5.12 DELETE ALL PHONEBOOK ENTIRES ................................................................ 25

5.13 VIEW PHONEBOOK CAPACITY .......................................................................... 25

TALK

In idle / predialling mode :

Press to make a call

In Redial list / Call List /

Phonebook entry: Press to

make a call to the selected

entry in the list

During ringing: Press to

answer a call

DOWN

In idle mode: Press to

access the redial list

In menu mode: Press to

scroll down the menu items

In Phonebook list / Redial

list / Call List: Press to scroll

down the list

During a call: Press to

decrease the earpiece or

speaker volume

During ringing: Press to

decrease the ringer volume

LEFT SOFT KEY

In idle mode: Press to access the main menu

In sub-menu mode: Press to confirm the selection

During a call: Press to access Intercom/

Phonebook/ Redial List/ Call List

2.1 Connecting the corded base station

1 Use the coiled cord to connect the corded handset to the base station, making sure

the plugs are inserted fully into the sockets on the handset and on the underside of

the base, until they click in place.

2 Plug the power supply cord & phone line cord into the sockets in the underside of

the base station.

3 Plug the power adapter into a 230Vac, 50Hz mains socket, and the line cord into

your telephone line socket.

Warning: Use only the power adapter provided for the base station.

Warning: Always use the cables provided in the box, others may not be compatible.

Note: The base unit needs mains power for normal operation, and the cordless handset will

not work without it.

6 CALLER DISPLAY (NETWORK DEPENDENT) ................................................... 26

6.1 VIEW THE CALL LIST ........................................................................................... 26

6.2 STORE A CALL LIST NUMBER INTO THE PHONEBOOK .................................. 26

6.3 DELETE AN ENTRY IN THE CALL LIST ...............................................................27

6.4 DELETE ALL CALL LIST ENTIRES ...................................................................... 27

6.5 VIEW THE DETAILS OF THE CALL LIST ENTRY..................................................27

6.6 VIEW THE CALL LOG ........................................................................................... 27

6.7 STORE A CALL LOG NUMBER INTO THE PHONEBOOK .................................. 28

6.8 DELETE AN ENTRY IN THE CALL LOG ...............................................................28

6.9 DELETE ALL CALL LOG ENTIRES ...................................................................... 28

7 PHONE SETTINGS ............................................................................................... 29

7.1 DATE AND TIME SETTINGS .................................................................................29

7.2 ALARM SETTINGS ............................................................................................... 30

7.3 HANDSET SETTINGS .......................................................................................... 31

7.4 BASE SETTINGS .................................................................................................. 33

7.5 SET DATE AND TIME .......................................................................................... 35

7.6 DE-REGISTER A HANDSET ................................................................................ 36

7.7 RINGER SETUP ....................................................................................................36

7.8 SET THE DIAL MODE............................................................................................ 37

7.9 SET THE RECALL (FLASH) TIME......................................................................... 37

7.10 SET THE KEY TONE ............................................................................................. 37

7.11 SET THE BASE LANGUAGE ................................................................................ 37

7.12 CHANGE THE SYSTEM PIN .................................................................................38

7.13 BASE DEFAULT ...................................................................................................38

8 REGISTRATION..................................................................................................... 39

9REPEATER MODE................................................................................................ 40

10 ANSWERING MACHINE....................................................................................... 41

10.1 SWITCHING THE TAM ON/OFF ........................................................................... 41

10.2 OUTGOING MESSAGE SETTINGS ..................................................................... 41

10.3 TAM MESSAGES .................................................................................................. 43

10.4 RECORD A MEMO ON THE TAM ......................................................................... 44

10.5 INCOMING CALL MESSAGES (ICM) ................................................................... 44

10.6 TAM SETTINGS .....................................................................................................45

10.7 REMOTE OPERATIONS ....................................................................................... 47

10.8 SWITCHING THE TAM ON/OFF ........................................................................... 48

10.9 OUTGOING MESSAGE SETTINGS ..................................................................... 48

10.10 SWITCH BETWEEN OGMS .................................................................................. 50

10.11 TAM MESSAGES .................................................................................................. 50

10.12 RECORD A MEMO ON THE TAM ......................................................................... 51

10.13 INCOMING CALL MESSAGES (ICM) ................................................................... 52

10.14 TAM SETTINGS .................................................................................................... 53

11 TROUBLESHOOTING .......................................................................................... 56

12 SAFETY ................................................................................................................ 57

13 ENVIRONMENT .................................................................................................... 58

2.2 Installing the cordless handset and charging the batteries

1) Slide open the battery compartment cover from the back of the handset.

2) Place the 2 supplied batteries into the battery compartment with the polarity markings

as indicated.

3) Slide the battery compartment cover back until it clicks into place.

4) Put the cordless handset on the charger and charge for 14 hours before using the

handset for the first time. The handset will give a beep when it is properly placed on the

charger.

Use only NiMH rechargeable batteries with the same characteristics

as the ones provided.

If you have a Broadband line (ADSL)

If you connect your telephone to a line with a broadband (ADSL)

connection, you will need to insert a micro-filter between the

telephone and the telephone line, otherwise you may get interference

between the telephone and the broadband, which could cause

problems.

In a home with broadband, every telephone must have a micro-filter

connected, not just the one at the telephone point that your modem

is connected to.

If you need more broadband (ADSL) micro-filters, contact your

broadband supplier.

USER GUIDE

Free field range

Indoor range

Handset battery life

(average values)

Number of handsets

Intercom mode

Three-way conference

(1 outside correspondent +

2 internal correspondents)

Electrical connection /

Corded Base:

Charger unit:

Telephone connection

Batteries

Operating temperature

TECHNICAL DETAILS 1 IMPORTANT SAFETY INSTRUCTIONS 2 INSTALLING YOUR PHONE

4.3 End a Call

During a call connection, press <OFF> to end the call.

Put the handset on the charger to end the call.

4.4 Adjust Earpiece and Handsfree Volume

There are 5 levels (VOLUME 1 to VOLUME 5) to choose from for each of the earpiece and

handsfree volume.

During a call:

Press <UP/DOWN> to select volume 1-5. The current setting is shown.

When you end the call, the setting will remain at the last selected level.

4.5 Mute a Call

You can talk to someone nearby without letting the caller hear you during a call.

During a call:

Press <C> to mute the microphone and “ MUTED ” will display on the

LCD. Your caller cannot hear you.

Press <C> again to unmute the microphone.

4.6 Turn Off the Handset Ringer

In idle mode, press and hold the < # > key to turn off the handset ringer.

The icon is displayed on the LCD.

If the handset ringer is off, press and hold the < # > key to turn it back on.

The icon will disappear.

4.7 Turn on the Keypad Lock

In idle mode, press and hold the < *> key to turn on the keypad lock.

The icon is displayed on the LCD. In keypad lock mode, press and hold the < *> key to

turn off the keypad lock.

The icon will disappear.

4.8 Redial the last number

You can redial any of the last 10 numbers called. If you have stored a name in the phone-

book to go with the number, the name will be displayed instead. The most recent last number

will display at the top of the redial list.

4.8.1 Redial a Number from the Redial List

1. In idle mode, press <DOWN> to access the redial list.

Note: If the redial list shows a name, press the < # > key to view the number of this

entry.

2. Press <UP/DOWN> to browse the redial list.

3. Press <TALK> / <SPEAKERPHONE> to dial to the selected redial number.

Note: If there are no numbers in the redial list, the display shows “EMPTY”.

4.8.2 Store a Redial Number into the Phonebook

1. Follow Steps 1 and 2 in section 4.8.1.

2. Press <MENU/OK> to show ADD TO PB.

3. Press <MENU/OK> and then enter the name you want it to have in the phonebook.

4. Press <MENU/OK> and then modify the number, if necessary.

5. Press <MENU/OK> to show <MELODY 1>.

6. Press <UP/DOWN> to browse the melody list. The respective melody will be played

when browsing the melody list.

(Note: The selected melody will only be played if you subscribe to Caller Display and

the incoming number matches the stored number.)

7. Press <MENU/OK> to confirm, and the entry will be stored.

4.8.3 Delete a Redial Number

1. Follow Steps 1 and 2 in section 4.8.1.

2. Press <MENU/OK> and <UP/DOWN> to select DELETE.

3. Press <MENU/OK> to confirm, and the entry will be deleted.

4.8.4 Delete All Redial List Entries

1. Follow Steps 1 and 2 in section 4.8.1.

2. Press <MENU/OK> and <UP/DOWN> to select DELETE ALL.

3. Press <MENU/OK> to display CONFIRM?.

4. Press <MENU/OK> to confirm. All entries will be deleted and the display will show

EMPTY.

Using the corded base:

4.9 Make an External Call

4.9.1 Preparatory dialling

Enter the phone number and lift up the corded handset or press <SPEAKERPHONE> to dial

the number. When entering the number, if you make a mistake, press <C> to delete digits.

Note: To insert a pause in the dialling sequence, press and hold the < 0 > button, the screen

will then show a “P” in the number. Press <R> to insert a recall (flash) signal and the

screen will show a "F".

4.9.2 Direct dialling

Lift up the corded handset or press <SPEAKERPHONE> to connect to the line and then

enter the phone number.

4.14 Emergency Call without Main Power

The corded base unit can make an emergency call with the corded handset when the mains

AC power is disconnected.

Pick up the corded handset and wait for several seconds to get the dial tone and then enter

the phone number to make a call.

Remarks: It is not possible to dial numbers from memories or use the speakerphone when

the mains power is off.

When the mains power is off, you can also answer an incoming call with the corded handset.

When the phone rings, pick up the corded handset to talk to the caller.

4.15 Redial

You can redial any of the last 10 numbers called. If you have stored a name in the phone-

book to go with the number, the name will be displayed as well.

4.15.1 Redial a Number from the Redial List

1. In idle mode, press <DOWN> to view the redial list.

Note: the redial list can also be viewed using <MENU> then selecting CALL LOG

and DIALED.

2. Press <UP/DOWN> to browse the redial list.

3. Pick up the corded handset or press <SPEAKERPHONE> to dial the selected redial

number.

Note: If there are no numbers in the redial list, the display will show “ EMPTY”.

4.15.2 Save a Redial Number into the Phonebook

1. Follow steps 1 and 2 in section 4.15.1

2. Press <MENU/OK> to show ADD TO PB?

3. Press <MENU/OK> and then modify the number, if necessary.

4. Press <MENU/OK> and then enter the name for the phonebook entry.

5. Press <MENU/OK> and then <UP/DOWN> to select a melody.

Note: The selected melody will only be played if you subscribe to Caller.

Display and the incoming number matches the stored number.

6. Press <MENU/OK> to save the redial number into the phonebook.

4.9.3 Call from the phonebook

Press <PHONEBOOK> to access the phonebook and press <UP/DOWN> to select the

desired phonebook entry.

Lift up the corded handset or press <SPEAKERPHONE> to dial out the selected phone-

book entry.

4.9.4 Call from the call log

Press <UP> to access the Call Log and press <UP/DOWN> to select the desired Call Log

entry. Lift up the corded handset or press <SPEAKERPHONE> to dial out the selected Call

Log entry.

4.9.5 Call from the redial list

Press <DOWN> to access the redial list and press <UP/DOWN> to select the desired

redial number. Lift up the handset or press <SPEAKERPHONE> to dial out the selected

redial number.

4.9.6 Call timer

Your base display automatically times the duration of every call. The call timer appears on

the display as soon as a call is answered or about 15 seconds after dialling, and remains

on the screen for a few seconds after the end of the call. It is shown in hours, minutes and

seconds format (HH:MM:SS).

4.10 Answer a Call

When there is an incoming ring, pick up the handset or press <SPEAKERPHONE> to

answer the call.

4.11 End a Call

During a call connection, put the handset on the base station to end the call. Or press

<SPEAKERPHONE> if you have a call in handsfree mode.

4.12 Adjust Earpiece and Handsfree Volume

There are 5 levels (VOLUME 1 to VOLUME 5) to choose from for each of the earpiece and

speaker volumes.

During a call:

Press <UP/DOWN> to increase or decrease the volume level respectively. The current

setting is shown. When you end the call, the settings will remain at the last selected level.

4.13 Mute a Call

You can talk to someone nearby without letting the caller hear you during a call.

During a call:

Press <C> to mute the microphone and “MUTED” is displayed on the LCD. Your caller

cannot hear you. Press <C> again to unmute the microphone. “MUTED” will be replaced

by “LINE IN USE” on the LCD, and the caller will be able to hear you again.

Using the corded base:

1. In idle mode, press <INT> and the registered handset numbers will display, along

with a "9".

2. Enter the handset number you want to call, or press "9" to call all handsets.

3. The called handset rings. Press <TALK> on the called handset to establish the

internal call.

Note: If only one handset is registered to the base station, pressing <INT> will call

the handset immediately.

4.17.2 Call All Handsets

Using a cordless handset:

1. In idle mode, press <C> and all the other registered handset numbers will display,

along with a "7" and a "9".

2. Press "9" to ring to all registered handsets and the base.

Using the corded base:

1. In idle mode, press <INT> and the registered handset numbers will display, along

with a "9".

2. Press "9" to ring to all registered handsets.

4.17.3 Transfer an External Call

Using a cordless handset:

During an external call:

1. Press <MENU/OK> to show INTERCOM, and then press <MENU/OK> again to

display the handset numbers plus "7" and "9".

2. Enter 7 to call the base or enter the number of the handset you want to call, or enter

"9" to call all the handsets and the base. The external call is put on hold automati-

cally and the called base or handset rings.

3. Press <TALK> on the called handset to establish an internal call.

3. Lift up the corded handset on the called base to establish an internal call.

4. Press <OFF> on the calling handset or put the calling handset on the charger to

end the current call with the external party.

5. The external call is transferred to the called base or handset.

4.15.3 Delete a Redial Number

1. Follow steps 1 and 2 in section 4.15.1

2. Press <MENU/OK> and <UP/DOWN> to select DELETE?

3. Press <MENU/OK> to show CONFIRM?

4. Press <MENU/OK> to confirm the delete.

4.15.4 Delete All Redial List Entries

1. In idle mode, press <DOWN> to open the redial list.

2. Press <MENU/OK> and <UP/DOWN> to select DELETE ALL?

3. Press <MENU/OK> to show CONFIRM?

4. Press <MENU/OK> to confirm the delete, and briefly display EMPTY.

4.16 Find the Handset

You can call all registered handsets by pressing <INT> and entering 9 on the base station.

All the handsets registered to the base will produce the paging tone and “CALL FR HS 7 ”

is displayed on the LCD. You can stop the paging by pressing <TALK> to set up the

intercom call on any handset.

Note: If there is an incoming call during paging, the phone will ring with the incoming call

instead of paging.

4.17 Make an Internal Call

This feature allows you to make internal calls, transfer external calls and make conference

calls. If the called base or handset is not answered within 60 seconds, the called base or

handset will stop ringing and the calling one will return to standby mode. (Or after 100

seconds if calling from the base.)

4.17.1 Intercom

Using a cordless handset:

1. In idle mode, press <C> and all the other registered handset numbers will display,

along with a "7" and a "9".

2. Enter 7 to call the corded base or enter the number of the handset you want to call,

or enter "9" to call all the handsets and base.

Note: If only one handset is registered to the base station, pressing <C> will call the

base immediately.

Using the corded base:

During an external call:

1. Press <INT> and enter the number of the handset you want to call, or enter "9" to

call all the handsets.

2. The external call is put on hold automatically and the called handset rings.

3. Press <TALK> on the called handset to establish an internal call.

4. Replace the corded handset on to the base to end the current call with the external

party.

5. The external call is transferred to the called handset.

4.17.4 Make a 3-way Conference Call

The conference call feature allows one external call to be shared with the base and one

handset or with two handsets. The three parties can share the conversation and no

additional network subscription is required.

Using a cordless handset:

During an external call:

1. Follow Steps 1 to 3 in section 4.17.3 (cordless)

2. Press and hold the "*" key on the calling handset to establish the conference call.

Either party (base or handset) can exit the conference and leave the other party still

connected to the external call.

Using the corded base:

During the external call:

1. Follow Steps 1 to 3 in section 4.17.3 (corded)

2. Press and hold the "*" key on the calling base to establish the conference call.

Any party (base or handset) can exit the conference and leave the other party still

connected to the external call.

4 USING YOUR PHONE

Using a cordless handset:

4.1 Make a Call

4.1.1 Preparatory Dialling

Enter the phone number and press <TALK> or <SPEAKERPHONE> to dial the

number. When entering the number, if you make a mistake, press <C> key to delete

digits.

4.1.2 Direct Dialling

Press <TALK> or <SPEAKERPHONE> to connect to the line and then enter the

phone number.

4.1.3 Call from the phonebook

Press <MENU/OK> and <UP/DOWN> to access the phonebook and press

<UP/DOWN> to select the desired phonebook entry. Press <TALK> or

<SPEAKERPHONE> to dial out the selected phonebook entry.

4.1.4 Call from the Call List

Press <UP> to access the Call List and press <UP/DOWN> to select the desired

Call List entry. Press <TALK> or <SPEAKERPHONE> to dial out the selected Call

List entry. Alternatively, press <MENU/OK> to access the Call List from the main

menu.

4.1.5 Call from the Redial List

Press <DOWN> to access the redial list and press <UP/DOWN> to select the

desired redial number. Press <TALK> or <SPEAKERPHONE> to dial out the

selected redial number.

4.1.6 Call Timer

Your handset automatically times the duration of every call. The call timer will

display as soon as you answer a call or 15 seconds after dialling, and remains on

the screen for 5 seconds after the end of a call. It is shown in hours, minutes and

seconds format (HH:MM:SS).

4.2 Answer a Call

If the handset is not on the charger: When the phone rings, press <TALK> /

<SPEAKERPHONE> to answer a call.

Note: If AUTO ANSWER is set ON, then lifting the handset off the charger will

answer the call automatically and no buttons need to be pressed.

5 PRIVATE PHONEBOOK

Your phone can store up to 50 private phonebook entries with names and numbers in each

handset and 50 entries in the base. Each phonebook entry can have a maximum of 20

digits for the phone number and 12 characters for the name.You can also select different

ringtones for your phonebook entries. (Note: the different ringtones only play if you

subscribe to Caller Display and the incoming number matches the stored number.)

Phonebook entries are stored alphabetically by name.

Using a cordless handset:

5.1 Add a New Phonebook Entry

In idle:

1. Press <MENU/OK> and <UP/DOWN> to select PHONEBOOK and then press

<MENU/OK> to access the phonebook.

2. Press <MENU/OK> to display ADD.

3. Press <MENU/OK> and then enter the name.

4. Press <MENU/OK> and then enter the number.

5. Press <MENU/OK> and <UP/DOWN> to select the desired ringtone for your

phonebook entry.

6. Press <MENU/OK> to store the phonebook entry.

5.2 Search a Phonebook Entry

In idle:

1. Press <MENU/OK>, <DOWN>, <MENU/OK> to access the phonebook.

2. Enter the first character of the name using the alphanumeric keys, (e.g. if it begins

with C, press the 2 key three times), and then press <UP/DOWN> to scroll to the

entry you want.

5.3 View a Phonebook Entry

In idle:

1. Press <MENU/OK>, <DOWN>, <MENU/OK> to access the phonebook.

2. Press <UP/DOWN> to select the desired phonebook entry.

3. Press <MENU/OK> and <UP/DOWN> to select VIEW.

4. Press <MENU/OK> and <UP/DOWN> to review the name, number and melody of

the selected phonebook entry.

Note: If number is more than 12 digits, press <MENU/OK> or <C> to view the

remaining digits.

5.4 Edit a Phonebook Entry

In idle:

1. Press <MENU/OK>, <DOWN>, <MENU/OK> to access the phonebook.

2. Press <UP/DOWN> to select the desired phonebook entry.

3. Press <MENU/OK> and <UP/DOWN> to select EDIT.

4. Press <MENU/OK> to display the current name.

5. Edit the name and press <MENU/OK>.

6. Edit the number and press <MENU/OK>

7. Press <UP/DOWN> to select the ringtone and press <MENU/OK> to confirm.

5.5 Delete a Phonebook Entry

In idle:

1. Press <MENU/OK>, <DOWN>, <MENU/OK> to access the phonebook.

2. Press <UP/DOWN> to select the desired phonebook entry.

3. Press <MENU/OK> and <UP/DOWN> to select DELETE.

4. Press <MENU/OK> to confirm, and the entry will be deleted.

5.6 Delete All Phonebook Entires

1. Press <MENU/OK>, <DOWN>, <MENU/OK> to access the phonebook.

2. Press <MENU/OK> and <UP/DOWN> to select DELETE ALL.

3. Press <MENU/OK> to display CONFIRM?

4. Press <MENU/OK> to confirm. All entries will be deleted and the display will show

EMPTY.

5.7 Check the Phonebook Usage

You can check how many phonebook entries are stored in your handset and how many

spaces are available for you to store more entries in the phonebook.

1. Press <MENU/OK>, <DOWN>, <MENU/OK> to access the phonebook.

2. Press <MENU/OK> and <UP/DOWN> to select PB STATUS.

3. Press <MENU/OK> to display how much of the phonebook is being used, for

example "14/50 USED" means 14 entries are stored out of the total 50 available

spaces.

Using the corded base:

5.8 Add a New Entry

In idle:

1. Press <MENU/OK> to show PHONEBOOK.

2. Press <MENU/OK> and <UP/DOWN> to show ADD.

3. Press <MENU/OK> and the display will show the cursor at the beginning of the

name position.

4. Key in the name using the digit keys (maximum 12 characters). If you make any

mistakes, press <C> to delete the last character.

5. Press <MENU/OK> and the cursor will move to the beginning of the number

position.

6. Key in the number using the digit keys (maximum 20 digits). If you make any

mistakes, press <C> to delete the last digit.

7. Press <MENU/OK> to show MELODY 1.

Use <UP/DOWN> to scroll through the melodies (there are 10 melodies to

choose from).

8 Press <MENU/OK> to confirm the melody and store the entry in the phonebook.

Note: If there is no more space in the phonebook, “MEM IS FULL” will appear on

the display.

5.9 Edit an Entry

In idle:

1. Press <MENU/OK> to show PHONEBOOK.

2. Press <MENU/OK> and <UP/DOWN> to show EDIT.

3. Press <MENU/OK> and the display will show the first phonebook entry in

alphabetical order.

4. Scroll <UP/DOWN> until you see the contact you want to edit.

5. Press <MENU/OK> and the cursor will appear at the end of the name.

6. Edit the name, pressing <C> to delete characters, if necessary.

7. Press <MENU/OK> and the cursor will appear at the end of the number.

8. Edit the number, pressing <C> to delete digits, if necessary.

9. Press <MENU/OK> and the display will show the current melody choice.

Press <UP/DOWN> to change the melody, if required.

10. Press <MENU/OK> to save the changes.

6 CALLER DISPLAY (NETWORK DEPENDENT)

This feature is available if you have subscribed to the Caller Display service with your

network service provider. Your phone can store up to 20 received calls with date/time

information in the base Call Log, and up to 20 in the cordless handset Call List. The

number will be shown on the handset and base displays when the phone is ringing.

If the number matches with one of entries in your base and/or handset Phonebook, the

caller's name stored in that phonebook will be displayed alternately with the number on the

handset, and with the number on the base.

The handset and base will ring with the melody associated with that phonebook entry.

If the call is from someone who withheld their number, e.g. by dialling 141, “WITHHELD”

will display.

If the call is from someone whose number is unavailable, e.g. an international call or from a

private exchange, “OUT OF AREA” will display.

If you've got new Caller Display records, the handset will display "X NEW CALLS" in

standby mode, and the base will have "NEW X" on its display, where X is the number of

new calls.

Using a cordless handset:

6.1 View the Call List

All received calls are saved in the Call List with the latest call at the top of the list.

When the call list is full, the oldest call will be replaced by a new call. Any unanswered

calls which have not been viewed are marked with a < * >icon at the centre of the

bottom line of the display.

1. Press <UP> to access the call list.

Press <MENU / OK> to select CALL LIST.

2. Press <UP/DOWN> to select the desired entry.

3. Press <#> to view the caller’s number if applicable.

6.2 Store a Call List Number into the Phonebook

1. Follow Steps 1 and 2 in Section 6.1.

2. Press <MENU/OK> to show ADD TO PB.

3. Press <MENU/OK> and then enter the name.

4. Press <MENU/OK> and the selected call list number is displayed.

5. Edit the number if necessary.

6. Press <MENU/OK> and <UP/DOWN> to select the melody.

7. Press <MENU/OK> to store the phonebook entry and return to the calls list.

6.3 Delete an Entry in the Call List

1. Follow Steps 1 and 2 in Section 6.1.

2. Press <MENU/OK> and <UP/DOWN> to show DELETE.

3. Press <MENU/OK> to confirm.

6.4 Delete All Call List Entries

1. Follow Steps 1 and 2 in Section 6.1.

2. Press <MENU/OK> and <UP/DOWN> to show DELETE ALL.

3. Press <MENU/OK> to show CONFIRM?

4. Press <MENU/OK> to confirm. All entries will be deleted and the display will show

EMPTY.

6.5 View the Details of the Call List Entry

1. Follow Steps 1 and 2 in Section 6.1.

2. Press <MENU/OK> and <UP/DOWN> to select DETAILS.

3. Press <MENU/OK> to display the date and time of the selected call list entry.

4. Press <MENU/OK> to go back to the previous screen.

Using the corded base:

6.6 View the Call Log

All unanswered calls are saved in the Call Log with the latest call at the top of the list.

When the call list is full, the oldest call will be replaced by a new call. Any unanswered call

which has not been read is marked with the icon when viewed, and the number of new

calls is shown at the top right of the screen in idle mode.

1. Press <CALLS> to see the most recent record in the Call Log.

Press <MENU/OK>, <DOWN>, <MENU/OK> to show MISSED, then press

<MENU/OK> to see the most recent record in the Call Log.

2. Press <UP/DOWN> to scroll through the Call Log.

Note: The icon will be displayed in the idle screen until all new calls have been

reviewed in the Call Log.

6.7 Store a Call Log Number into the Phonebook

1. Follow steps 1 and 2 in Section 6.6.

2. Press<MENU/OK> to show ADD TO PB

3. Press <MENU/OK> and the display will show the cursor at the beginning of the

name position.

4. Enter the name using keypad.

5. Press <MENU/OK> to confirm the name.

6. The display will show the cursor at the end of the number position. If the number

needs modification, enter the digits or press <CLEAR > to clear a digit.

7. Press <MENU/OK> to confirm the number, and the display will show MELODY 1.

8. Press <UP/DOWN> to scroll through the melodies.

9. Press <MENU/OK> to confirm your selection. You will hear a confirmation tone, and

the display will return to the call log.

6.8 Delete an Entry in the Call Log

1. Follow steps 1 and 2 in Section 6.6.

2. Press <MENU/OK> and then <UP/DOWN> to show DELETE.

3. Press <MENU/OK> to show CONFIRM?

4. Press<MENU/OK> to delete the entry.

6.9 Delete All Call Log Entries

1. Follow steps 1 and 2 in Section 6.6.

2. Press <MENU/OK> and then <UP/DOWN> to show DELETE ALL.

3. Press <MENU/OK> to show CONFIRM?

4. Press <MENU/OK> to delete all entries, and the display will show EMPTY.

5.10 View an Entry

In idle:

1. Press <PHONEBOOK> to display the first phonebook entry in alphabetical order.

1. Press <MENU/OK> three times to display the first phonebook entry.

2. Enter the first letter of the name you want to view using the alphanumeric keys and

then scroll <UP/DOWN> to find the entry you want.

Note: if no name matches with the first letter you entered, the next nearest phonebook

entry will be displayed.

3. Press <UP/DOWN> to select and view the desired phonebook entry.

5.11 Delete an Entry

In idle:

1. Press <MENU/OK> to show PHONEBOOK.

2. Press <MENU/OK> and <UP/DOWN> to show DELETE.

3. Press <MENU/OK> and <UP/DOWN> to select the desired phonebook entry.

4. Press <MENU/OK> to display “CONFIRM?”.

5. Press <MENU/OK> to confirm the delete, or <C> to cancel this operation.

5.12 Delete All Phonebook Entries

In idle:

1. Press <MENU/OK> to show PHONEBOOK.

2. Press <MENU/OK> and <UP/DOWN> to show DELETE ALL.

3. Press <MENU/OK> to display “CONFIRM?”.

4. Press <MENU/OK> to confirm the delete, or <C> to cancel the operation.

5.13 View Phonebook Capacity

In idle:

1. Press <MENU/OK> to show PHONEBOOK.

2. Press <MENU/OK> and <UP/DOWN> to show PB STATUS.

3. Press <MENU/OK> to display how much of the phonebook is being used, for

example "33/50 USED" means 33 entries are stored out of the total 50 available

spaces.

7 PHONE SETTINGS

Your phone comes with a selection of settings that you can change to personalize your

phone the way you like it to work.

Using a cordless handset:

7.1 Date and Time Settings

You will need to set the correct time and date so that you know when you received answer-

ing machine messages.

Note: If you subscribe to Caller Display, the time and date settings should be updated

automatically from the network when you receive an incoming call, but the Caller Display

service only sends the month and date, not the year, so you may need to set the year,

otherwise when playing answering machine messages, the day given by the voice time

stamp may be wrong.

7.1.1 Change the Date Format

1. Press <MENU/OK> and <UP/DOWN> to select HS SETTINGS.

2. Press <MENU/OK> and <UP/DOWN> to select DATE & TIME.

3. Press <MENU/OK> to show DATE FORMAT.

4. Press <MENU/OK> and <UP/DOWN> to select your desired date format for the

handset display (DD-MM-YY or MM-DD-YY).

5. Press <MENU/OK> to confirm.

7.1.2 Change the Time Format

1. Press <MENU/OK> and <UP/DOWN> to select HS SETTINGS.

2. Press <MENU/OK> and <UP/DOWN> to select DATE & TIME.

3. Press <MENU/OK> and <UP/DOWN> to select TIME FORMAT.

4. Press <MENU/OK> and <UP/DOWN> to select your desired time format for the

handset display (12 HR or 24 HR ).

5. Press <MENU/OK> to confirm.

7.1.3 Set the Time

1. Press <MENU/OK> and <UP/DOWN> to select HS SETTINGS.

2. Press <MENU/OK> and <UP/DOWN> to select DATE & TIME.

3. Press <MENU/OK> and <UP/DOWN> to select SET TIME.

4. Press <MENU/OK> and then to enter the time in 24 hour format.

5. Press <MENU/OK> to confirm.

Note: If time has been set before, the current time will display, otherwise, “HH:MM”

will display.

7.1.4 Set the Date

1. Press <MENU/OK> and <UP/DOWN> to select HS SETTINGS.

2. Press <MENU/OK> and <UP/DOWN> to select DATE & TIME.

3. Press <MENU/OK> and <UP/DOWN> to select SET DATE.

4. Press <MENU/OK> and then enter the date in the format you set in Section 7.1.1.

5. Press <MENU/OK> to confirm.

Note: If date has been set before, the current date will display, otherwise,

“DD-MM-YY” will display.

7.2 Alarm Settings

You can set an alarm time on the handset. When an alarm is set, the icon is shown on

the handset display.

When the alarm time is reached, the and “ALARM ON” flash on the handset display

and the alarm melody plays for 45 seconds. You can press any key to disable the alarm. If

the snooze function is activated, the alarm will sound again at the end of the snooze period

of seven minutes.

7.2.1 Turn on/off the Alarm

1. Press <MENU/OK> and <UP/DOWN> to select HS SETTINGS.

2. Press <MENU/OK> to show ALARM.

3. Press <MENU/OK> and <UP/DOWN> to select ON/OFF.

5. Press <MENU/OK> to confirm.

Note: If ON is selected, you will be asked to set the alarm time.

7.2.2 Set the Alarm Time (if the Alarm is set to be ON)

1. Follow Steps 1 to 4 in Section 7.2.1.

2. Enter the alarm time.

3. Press <MENU/OK> to show SNOOZE.

4. Press <MENU/OK> and <UP/DOWN> to select snooze ON or OFF.

5. Press <MENU/OK> to confirm.

7.3 Handset Settings

7.3.1 Ringer Setup

7.3.1.1 Set the Ringer Melody for Internal Calls

1. Press <MENU/OK> and <UP/DOWN> to select HS SETTINGS.

2. Press <MENU/OK> and <UP/DOWN> to select RING SETUP.

3. Press <MENU/OK> and <UP/DOWN> to select INT RING.

4. Press <MENU/OK> and <UP/DOWN> to select the melody you want to hear for

internal calls.

Note: The respective ringer melody will be played while browsing the melody list.

5. Press <MENU/OK> to confirm.

7.3.1.2 Set the Ringer Melody for External Calls

1. Press <MENU/OK> and <UP/DOWN> to select HS SETTINGS.

2. Press <MENU/OK> and <UP/DOWN> to select RING SETUP.

3. Press <MENU/OK> and <UP/DOWN> to select EXT RING.

4. Press <MENU/OK> and <UP/DOWN> to select the melody you want to hear for

external calls.

Note: The respective ringer melody will be played while browsing the melody list.

5. Press <MENU/OK> to confirm.

7.3.1.3 Set the Ringer Volume

1. Press <MENU/OK> and <UP/DOWN> to select HS SETTINGS.

2. Press <MENU/OK> and <UP/DOWN> to select RING SETUP.

3. Press <MENU/OK> and <UP/DOWN> to select RING VOLUME.

4. Press <MENU/OK> and <UP/DOWN> to select the desired ringer volume (a total of

6 ringer volume levels including VOLUME OFF).

Note: The respective ringer volume will be played during your selection. If VOLUME

OFF is selected, the icon will display.

5. Press <MENU/OK> to confirm.

7.3.2 Set Alert Tones

Three different alert tones are set on by default, but can be turned off, if desired.

Key Tone - a single beep is emitted when you press a key.

Battery Tone - warning tones are emitted if the battery is low while you are talking on the

phone, to alert you that you need to charge the handset batteries.

Out Of Range - warning tones are emitted while you are talking on the phone, to alert you

to move closer to the base unit, before the call is lost.

1. Press <MENU/OK> and <UP/DOWN> to select HS SETTINGS.

2. Press <MENU/OK> and <UP/DOWN> to select TONE SETUP.

3. Press <MENU/OK> and <UP/DOWN> to select KEY TONE / BATTERY TONE /

OUT OF RANGE.

4. Press <MENU/OK> and <UP/DOWN> to turn on or off these tones.

5. Press <MENU/OK> to confirm.

7.3.3 Set the Handset Language

1. Press <MENU/OK> and <UP/DOWN> to select HS SETTINGS.

2. Press <MENU/OK> and <UP/DOWN> to select LANGUAGE.

3. Press <MENU/OK> and <UP/DOWN> to select the desired language.

4. Press <MENU/OK> to confirm.

7.3.4 Rename the Handset

1. Press <MENU/OK> and <UP/DOWN> to select HS SETTINGS.

2. Press <MENU/OK> and <UP/DOWN> to select RENAME HS.

3. Press <MENU/OK> and change the name of your handset, using <C> key to delete

letters and the alphanumeric keys to enter up to 10 letters for the name.

4. Press <MENU/OK> to confirm.

7.3.5 Choose the Information to be displayed in idle

You can choose to display the time or handset name in your idle screen.

1. Press <MENU/OK> and <UP/DOWN> to select HS SETTINGS.

2. Press <MENU/OK> and <UP/DOWN> to select HS DISPLAY.

3. Press <MENU/OK> and <UP/DOWN> to select HANDSET NAME or TIME.

4. Press <MENU/OK> to confirm.

7.3.6 Set the Auto Answer

If you turn on the Auto Answer, you can answer a call automatically by just lifting the

handset off the charger without having to press any key.

1. Press <MENU/OK> and <UP/DOWN> to select HS SETTINGS.

2. Press <MENU/OK> and <UP/DOWN> to select AUTO ANSWER.

3. Press <MENU/OK> and <UP/DOWN> to turn on or off the auto answer feature.

4. Press <MENU/OK> to confirm.

7.4 Base Settings

7.4.1 Set the Base Ringer Melody

1. Press <MENU/OK> and <UP/DOWN> to select BS SETTINGS.

2. Press <MENU/OK> to show BS RINGER.

3. Press <MENU/OK> and <UP/DOWN> to select the melody you want to hear when

the base rings.

Note: The respective ringer melody will be played while browsing the melody list.

4. Press <MENU/OK> to confirm.

7.4.2 Set the Ringer Volume

1. Press <MENU/OK> and <UP/DOWN> to select BS SETTINGS.

2. Press <MENU/OK> and <UP/DOWN> to select RING VOLUME.

3. Press <MENU/OK> and <UP/DOWN> to select the desired ringer volume (a total of

6 ringer volume levels including VOLUME OFF).

Note: The respective ringer volume will be played during your selection.

4. Press <MENU/OK> to confirm.

7.4.3 De-register a Handset

This operation should only be necessary if one of your handsets becomes faulty or lost and

needs to be replaced.

You will need to enter the 4-digit system PIN in order to de-register a handset from the base

station. (The default PIN is 0000.)

A de-registered handset will have the icon flashing and REGISTER on the display.

Note: You cannot de-register the handset that you are currently using.

1. Press <MENU/OK> and <UP/DOWN> to select BS SETTINGS.

2. Press <MENU/OK> and <UP/DOWN> to select DELETE HS.

3. Press <MENU/OK> to show PIN?

4. Enter the 4-digit system PIN.

5. Press <MENU/OK> and the first registered handset number is shown.

6. Press <UP/DOWN> to step through the list of registered handsets and select the

one that you want to de-register.

7. Press <MENU/OK> to confirm, and the chosen handset will be de-registered.

7.4.4 Change the Dial Mode

You should normally leave the dialling mode at its default setting of TONE (also called

DTMF) unless the phone is connected to an old exchange that only recognises PULSE

dialling.

1. Press <MENU/OK> and <UP/DOWN> to select BS SETTINGS.

2. Press <MENU/OK> and <UP/DOWN> to select DIAL MODE.

3. Press <MENU/OK> and <UP/DOWN> to select TONE or PULSE.

(The current setting is indicated by an asterisk to the right.)

4. Press <MENU/OK> to confirm.

7.4.5 Change the Recall (Flash) Time

You may need to change the recall (flash) time if your phone is connected to a PBX. The

recall time options are SHORT (100ms), MEDIUM (300ms) or LONG (the default value of

600ms).

1. Press <MENU/OK> and <UP/DOWN> to select BS SETTINGS.

2. Press <MENU/OK> and <UP/DOWN> to select FLASH TIME.

3. Press <MENU/OK> and <UP/DOWN> to select your desired flash time (SHORT,

MEDIUM, LONG, with the current setting indicated by an asterisk to the right).

4. Press <MENU/OK> to confirm.

7.4.6 Change the System PIN Code

A 4-digit system PIN code is used for changing the system settings of the base station. It is

used to protect your phone against unauthorized use. The default system PIN code is 0000.

1. Press <MENU/OK> and <UP/DOWN> to select BS SETTINGS.

2. Press <MENU/OK> and <UP/DOWN> to select CHANGE PIN.

3. Press <MENU/OK> to show PIN?

4. Enter the old system PIN.

5. Press <MENU/OK> to show NEW PIN?, and enter the new system PIN.

6. Press <MENU/OK> to show CONFIRM?, and enter the new system PIN again.

Note: If the new PIN entered in Step 6 is not the same as the new system PIN

entered in Step 5, you must enter the new system PIN at Step 5 again.

7. Press <MENU/OK> to confirm.

7.4.7 Reset your Cordless Handset

You can reset your phone to the default settings. After reset, all your personal settings, call list

entries, redial list entries and answering machine messages will be deleted, but your phone-

book remains unchanged.

1. Press <MENU/OK> and <UP/DOWN> to select DEFAULT.

2. Press <MENU/OK> to show PIN?

3. Enter the 4-digit system PIN (default value 0000).

4. Press <MENU/OK> to show CONFIRM?

5. Press <MENU/OK> to confirm, and the phone will be reset to its default settings.

Using the corded base:

7.5 Set Date and Time

7.5.1 Set time format

1. Press <MENU/OK> and <UP/DOWN> to select DATE & TIME.

2. Press <MENU/OK> to show TIME FORMAT.

3. Press <MENU/OK> and <UP/DOWN> to select 12HR or 24HR.

4. Press <MENU/OK> to confirm.

7.5.1 Set Date and Time

The format for the date is YYYY-MM-DD, and the time is HH:MM in 24-hour format.

1. Press <MENU/OK> and <UP/DOWN> to show DATE & TIME.

2. Press <MENU/OK> to show SET CLOCK.

3. Press <MENU/OK> and the 4-digit year is displayed with the last two digits of the

year flashing.

4. Press <UP/DOWN> to set the year.

5. Press <MENU/OK> and the month field will flash.

6. Press <UP/DOWN> to set the month.

7. Press <MENU/OK> and the date field will flash.

8. Press <UP/DOWN> to set the date.

9. Press <MENU/OK> and the hour field will flash.

10. Press <UP/DOWN> to set the hour.

11. Press <MENU/OK> and the minutes field will flash.

12. Press <UP/DOWN> to set the minutes.

13. Press <MENU/OK> to confirm and you will hear a beep and the display will return to

the idle screen.

7.6 De-register a Handset

This operation should only be necessary if one of your handsets becomes faulty or lost and

needs to be replaced.

You will need to enter the 4-digit system PIN in order to de-register a handset from the base

station. (The default PIN is 0000.)

A de-registered handset will have the antenna icon flashing and REGISTER on the display.

1. Press <MENU> and <UP/DOWN> to select SETTINGS.

2. Press <OK> and <UP/DOWN> to select DELETE HS.

3. Press <OK> and the display will show “PIN?”, enter a 4-digit PIN code (default

setting is 0000).

4. Press <MENU/OK> and the first registered handset number is shown.

5. Press <UP/DOWN> to step through the list of registered handsets and select the

one you want to de-register.

6. Press <MENU/OK> and the selected handset will be de-registered.

7.7 Ringer Setup

7.7.1 Change Ringer Melody

There are 10 base ringer melodies from 1 to 10, and you can set a different ringer melody

for internal and external calls.

1. Press <MENU/OK> and <UP/DOWN> to select SETTINGS.

2. Press <MENU/OK> to show RING SETUP.

3. Press <MENU/OK>and <UP/DOWN> to select EXT RING or INT. RING.

4. Press <MENU/OK> and the display will show MELODY. Then press <MENU/OK> to

show MELODY 1.

5. Press <UP/DOWN> to scroll through the Melody list (from 1 to 10).

6. Press <MENU/OK> to confirm the setting.

Note: The respective ringer melody will be played during your selection.

7.7.2 Change Ringer Volume

You can adjust the volume level of the ringer for internal calls (INT RING) and external calls

(EXT RING) separately, with settings from 1 (the quietest) to 5 (loudest), or turn it OFF.

1. Follow steps from 1 to 3 in section 7.7.1.

2. Press <MENU/OK> <UP/DOWN> to select VOLUME. Then press <MENU/OK> and

<UP/DOWN> to step through the volume level list Off, 1 to 5.

3. Press <MENU/OK> to confirm the setting.

Note: The respective ringer volume will be played during your selection.

If VOLUME OFF is selected, the icon will display.

7.8 Set the Dial Mode

You should normally leave the dialling mode at its default setting of TONE (also called

DTMF) unless the phone is connected to an old exchange that only recognises PULSE

dialling.

In Idle:

1. Press <MENU/OK> and <UP/DOWN> to select SETTINGS.

2. Press <MENU/OK> and <UP/DOWN> to select DIAL MODE.

3. Press <MENU/OK> and <UP/DOWN> to select TONE or PULSE.

4. Press <MENU/OK> to confirm.

7.9 Set the Recall (Flash) Time

You may need to change the recall (flash) time if your phone is connected to a PBX. The

recall time options are SHORT (the default value of 100ms), MEDIUM (300ms) or LONG

(the default value of 600ms).

In Idle:

1. Press <MENU/OK> and <UP/DOWN> to select SETTINGS.

2. Press <MENU/OK> and <UP/DOWN> to select FLASH TIME.

3. Press <MENU/OK> and <UP/DOWN> to select the desired flash time, from SHORT,

MEDIUM and LONG.

4. Press <MENU/OK> to confirm.

7.10 Set the Key Tone

The Key Tone is a confirmation beep when you press any key. It is set on by default, but can

be turned off, if desired.

In Idle:

1. Press <MENU/OK> and <UP/DOWN> to select SETTINGS.

2. Press <MENU/OK> and <UP/DOWN> to select KEY TONE.

3. Press <MENU/OK> and <UP/DOWN> to select ON or OFF.

4. Press <MENU/OK> to confirm.

7.11 Set the Base Language

In Idle:

1. Press <MENU/OK> and <UP/DOWN> to select SETTINGS.

2. Press <MENU/OK> and <UP/DOWN> to select LANGUAGE.

3. Press <MENU/OK> and <UP/DOWN> to select your desired language.

4. Press <MENU/OK> to confirm.

7.12 Change the System PIN

A 4-digit system PIN code is used for changing the system settings of the base station, and

is used to protect your phone from unauthorized use. The default system PIN code is 0000.

1. Press <MENU/OK> and <UP/DOWN> to select SETTINGS.

2. Press <MENU/OK> and <UP/DOWN> to select CHANGE PIN.

3. Press <MENU/OK> and display will show “PIN?”, enter the 4-digit PIN

(default setting is 0000) and press <MENU/OK>.

4. The display will show “NEW PIN”, enter the new PIN and press <MENU/OK>.

5. The display will show “REPEAT”, enter the new PIN again, and press <MENU/OK>

to confirm.

Note: If the incorrect PIN is entered or the new PIN is not entered twice the same,

an error tone will be emitted and it will return to the previous menu.

7.13 Base Default

You can reset all of your base settings to their default settings. After a reset, all your

personal base settings, call list entries, redial list entries, phonebook entries, and answering

messages will be deleted.

1. Press <MENU/OK> and <UP/DOWN> to select SETTINGS.

2. Press <MENU/OK> and <UP/DOWN> to select BS DEFAULT.

3. Press <MENU/OK> and display will show “PIN?”, enter the 4-digit PIN

(default setting is 0000).

4. Press <MENU/OK> to confirm, and base will return to the previous menu.

8 REGISTRATION

IMPORTANT: When you purchase a phone system, all handsets are already registered to

your base, so you do not need to register them.

Handset registration is only necessary when you buy extra handsets or if a handset has

become faulty.

You can register additional handsets to have up to five handsets per base unit, with each

handset's number (1 to 5) shown on its display.

(Note: each handset can only be registered to one base.)

To check whether a handset is registered, make sure mains power to the base unit is

switched on and the handset is within range. The handset's display should show its number

and the < > should be steadily on. If the display shows "REGISTER", you need to

On the cordless handset:

1. Press <MENU/OK> and <UP/DOWN> to select REGISTRATION.

2. Press <MENU/OK> to display “PIN ?”, enter the 4-digit PIN code for the base

(default PIN code is 0000).

3. Press <MENU/OK> and the display will flash “SEARCHING”.

On the base:

4. At the same time, press <MENU/OK> and <UP/DOWN> to select REGISTRATION.

5. Press the <MENU/OK> to see “SEARCHING” flashing on the base display. After a

short delay, if the registration is successful, there will be a confirmation beep, and

the Handset display will go back to idle mode with the new handset number shown.

The base display will also go back to idle mode.

6. Lift the corded handset up of the base at any time to cancel.

9 REPEATER MODE

With a repeater you can increase the range of your base station. At first, you must activate

the repeater mode from your phone :

On the cordless handset:

1. Press <MENU/OK> and <UP/DOWN> to select BS SETTINGS.

2. Press <MENU/OK> and <UP/DOWN> to select REPEATER.

3. Press <MENU/OK> and <UP/DOWN> to select ON to activate the repeater mode,

select OFF to deactivate it.

On the base:

1. Press <MENU/OK> and <UP/DOWN> to select SETTINGS.

2. Press <MENU/OK> and <UP/DOWN> to select REPEATER.

3. Press <MENU/OK> and <UP/DOWN> to select ON to activate the repeater mode,

select OFF to deactivate it.

With the repeater mode activated, refer to your repeater user manual about how to register

it to your phone base station. After successful registration, your repeater is ready for use.

10 ANSWERING MACHINE

Your phone includes a telephone answering machine that records unanswered calls when it

is on. The recording time is 32 minutes*. As well as recording incoming messages, you can

record memos for other users of your phone. If the answering machine memory is full, the

handset will display TAM FULL alternately with the handset's name or time, depending on

the handset standby display mode set (see section 7.3.5), and the base will also display

TAM FULL. You will have to delete some messages before any new ones can be recorded.

The answering machine features and messages can be accessed from the base or from a

cordless handset.

When the answering machine is set to ON, calls will be answered after the set answer

delay and the caller can then leave you a message. When the answering machine is set to

OFF, calls will be answered after 10 rings and the answer only message will be played to

your callers. They will not be able to leave you a message.

Using a cordless handset:

10.1 Switching the TAM On/Off

1. Press <MENU/OK> and <UP/DOWN> to select ANS. MACHINE.

2. Press <MENU/OK> and <UP/DOWN> to select TAM ON/OFF.

3. Press <MENU/OK> and <UP/DOWN> to select ON or OFF.

(The current selection is marked with an asterisk.)

4. Press <MENU/OK> to confirm.

Note: If the answering machine is ON, the icon is shown on the handset display.

If the answering machine is OFF, the icon will disappear from the handset display.

10.2 Outgoing Message Settings

10.2.1 Record Your Own Outgoing Message (OGM)

You can record your own OGM for ANS & REC mode or ANSWER ONLY mode. When

you record your own OGM, it will be used when the answering machine answers the call.

If your personal OGM is deleted, the preset OGM will be restored automatically.

1. Press <MENU/OK> and <UP/DOWN> to select ANS. MACHINE.

2. Press <MENU/OK> and <UP/DOWN> to select TAM SETTINGS.

3. Press <MENU/OK> and <UP/DOWN> to select OGM SETTINGS.

4. Press <MENU/OK> and <UP/DOWN> to select ANS & REC or ANSWER ONLY.

5. Press <MENU/OK> and <UP/DOWN> to select RECORD MESS.

6. Press <MENU/OK> to start recording your personal OGM and “RECORDING” is

displayed on the screen.

7. Press <MENU/OK> to stop and save your personal OGM.Your newly saved OGM

will playback automatically. Alternatively, press <C> to return to previous screen

without saving the personal OGM.

* According to recording quality selected

10.2.2 Playback the Outgoing Message (OGM)

1. Press <MENU/OK> and <UP/DOWN> to select ANS. MACHINE.

2. Press <MENU/OK> and <UP/DOWN> to select TAM SETTINGS.

3. Press <MENU/OK> and <UP/DOWN> to select OGM SETTINGS.

4. Press <MENU/OK> and <UP/DOWN> to select ANS & REC or ANSWER ONLY.

5. Press <MENU/OK> to show PLAYBACK.

6. Press <MENU/OK> to playback your current OGM and “PLAYING OGM” is

displayed on the screen.

7. Press <MENU/OK> to stop the OGM playback and return to the previous menu.

Note: If a personalised OGM has not been recorded the pre-set OGM will be played.

10.2.3 Delete the Personalised OGM (Set OGM to DEFAULT)

1. Repeat Steps 1 to 6 in Section 10.2.2.

2. Press <C> while the OGM is playing to delete your personalized OGM and return to

the previous menu and the pre-set OGM is restored automatically.

Nota: If pre-set OGM is playing, you are not allowed to delete it, so pressing <C> will

just stop the playback and return to the previous menu.

10.2.4 Set the Answer Mode (Switch between OGMs)

By default, the answer machine is set in ANS & REC mode which allows callers to leave a

message.This mode can be changed to ANSWER ONLY which does not allow callers to leave

a message. In that case, your callers will be prompted to call back later.

1. Press <MENU/OK> and <UP/DOWN> to select ANS. MACHINE.

2. Press <MENU/OK> and <UP/DOWN> to select TAM SETTINGS.

3. Press <MENU/OK> to show ANSWER MODE.

4. Press <MENU/OK> and <UP/DOWN> to select ANS & REC or ANSWER ONLY.

(Note: the current selection is indicated with an asterisk.)

5. Press <MENU/OK> to confirm.

Note: If your answering machine memory becomes full while it is in ANS & REC

mode, it will change automatically to ANSWER ONLY mode, until after some

messages have been deleted.

10.3 TAM Messages

10.3.1 Play the TAM messages

When new messages are recorded on the answering machine, the icon flashes on the

handset display. After a new message is played, it will be saved automatically as an old

message, until it is deleted.

Old messages will be played after all new messages are played completely.

1. Press <MENU/OK> and <UP/DOWN> to select ANS. MACHINE.

2. Press <MENU/OK> to show MSG PLAYBACK.

3. Press <MENU/OK> to start message playback and the screen displays the date and

time information of the message received.

Note: A icon is placed at the centre of the bottom of the LCD to indicate that it

is a new message. When a message has been played, the icon will

disappear and will not be shown when you listen to this message again.

4. During message playback, press <UP> or <DOWN> to increase or decrease the

message playback volume respectively.

5. Press <MENU/OK> and <UP/DOWN> to select STOP, FORWARD, PREVIOUS,

DELETE to perform the following functions during message playback.

STOP: Stop the current message playback.

FORWARD: Skip to play the next message.

PREVIOUS: Repeat playing the current message from the beginning.

DELETE: Delete the current message.

Press <MENU/OK> to select the displayed option.

Note: Alternatively, you can use the following shortcut keys to control different

operation during message playback.

Press <Key 5> to stop message playback.

Press <Key 4> to repeat playing the current message from the beginning.

Press <Key 6> to skip to play next message.

Press <Key 2> to delete the current message being played.

10.3.2 Delete All the TAM Messages

1. Press <MENU/OK> and <UP/DOWN> to select ANS. MACHINE.

2. Press <MENU/OK> and <UP/DOWN> to select DELETE ALL.

3. Press <MENU/OK> to show CONFIRM?

4. Press <MENU/OK> to delete all old messages.

Note: If there are no more messages in the answering machine, “EMPTY” will

display briefly before returning to the ANS. MACHINE menu.

10.4 Record a Memo on the TAM

You can record your memo message for another user. When you record a memo, the

message counter will increase by one and the message can be played back in the same

way as answering machine messages. Memo recording can still function even when the

answering machine is turned off.

1. Press <MENU/OK> and <UP/DOWN> to select ANS. MACHINE.

2. Press <MENU/OK> and <UP/DOWN> to select MEMO.

3. Press <MENU/OK> to start memo recording and “RECORDING” is displayed.

4. Press <MENU/OK> to stop memo recording and save the memo. The memo will

then play back. Let it play to the end or press <MENU/OK> again to stop the

playback and keep the message.

4. Press <C> at any time to stop memo recording without saving and return back to

the ANS. MACHINE menu.

10.5 Incoming Call Messages (ICM)

If the answering machine is ON and set for ANS & REC, when there is an incoming call, the

answering machine will answer it and play the OGM, followed by a beep sound. The caller

can then leave a message. The caller's voice will also be played through the loudspeaker

on the base station, to allow you to screen the call and decide if you want to leave the

answering machine to record the message, or if you want to talk to the caller directly.

At any time if you want to pick up the call, you can press <TALK> or <SPEAKERPHONE>

to intercept the call and talk to the caller directly. The message recording will be stopped

automatically.

• You can use the corded handset, the speakerphone or the cordless handset to intercept

the call to speak to the caller during ICM recording.

10.6 TAM Settings

You can use the TAM SETTINGS menu through the handset to change the settings of your

answering machine.

10.6.1 Set the Outgoing Message Language

1. Press <MENU/OK> and <UP/DOWN> to select ANS. MACHINE.

2. Press <MENU/OK> and <UP/DOWN> to select TAM SETTINGS.

3. Press <MENU/OK> and <UP/DOWN> to select TAM LANGUAGE.

4. Press <MENU/OK> and <UP/DOWN> to select your desired OGM language.

5. Press <MENU/OK> to confirm.

10.6.2 Set the Answer Delay

You can set the number of rings before the answering machine answers and starts playing

your OGM.You can set the answering machine to answer after two to eight rings or TIME

SAVER.

When you ring in to access your messages remotely, if your answering machine is set to

time saver, it will answer after 2 rings if you have new messages, or after 4 rings if you do

not have any new messages, so if you call in and don't get an answer after 2 or 3 rings, you

can hang up and save on call charges.

1. Press <MENU/OK> and <UP/DOWN> to select ANS. MACHINE.

2. Press <MENU/OK> and <UP/DOWN> to select TAM SETTINGS.

3. Press <MENU/OK> and <UP/DOWN> to select ANSWER DELAY.

4. Press <MENU/OK> and <UP/DOWN> to select your desired answer delay from the

available options 2 RINGS, 4 RINGS, 6 RINGS, 8 RINGS or TIME SAVER. (The

current selection is marked with an asterisk.)

5. Press <MENU/OK> to confirm.

10.6.3 Set the Recording Time of Incoming Message

You can set the maximum length of the recording time of the incoming messages to be

either 1, 2 or 3 minutes, or of unlimited length up to the available memory left on the

answering machine.

1. Press <MENU/OK> and <UP/DOWN> to select ANS. MACHINE.

2. Press <MENU/OK> and <UP/DOWN> to select TAM SETTINGS.

3. Press <MENU/OK> and <UP/DOWN> to select RECORD TIME.

4. Press <MENU/OK> and <UP/DOWN> to select your desired recording time from the

available options 60S, 120S, 180S or UNLIMITED. (The current selection is marked

with an asterisk.)

5. Press <MENU/OK> to confirm.

10.6.3 Activate Remote Access

Your phone lets you check your messages, or otherwise operate your answering machine,

by calling the answering machine when you are away from home and then dialling a 4-digit

remote access PIN from a tone-dialling phone, provided the Remote Access is turned on.

1. Press <MENU/OK> and <UP/DOWN> to select ANS. MACHINE.

2. Press <MENU/OK> and <UP/DOWN> to select TAM SETTINGS.

3. Press <MENU/OK> and <UP/DOWN> to select REMOTE ACC.

4. Press <MENU/OK> and <UP/DOWN> to select ON or OFF to turn on or off the

remote access respectively.

5. Press <MENU/OK> to confirm.

10.6.5 Change the Compression Rate

Three different compression rates (HIGH, MEDIUM and LOW) are provided for you to

select different quality levels of recording incoming message. The lower the compression

rate, the higher the recording quality level attained, but the shorter the total recording time

available. (LOW = 20 minutes, MEDIUM = 30 minutes, HIGH = 50 minutes approximately.)

1. Press <MENU/OK> and <UP/DOWN> to select ANS. MACHINE.

2. Press <MENU/OK> and <UP/DOWN> to select TAM SETTINGS.

3. Press <MENU/OK> and <UP/DOWN> to select COMPRESSION.

4. Press <MENU/OK> and <UP/DOWN> to select your desired compression rate.

5. Press <MENU/OK> to confirm.

10.6.6 Turn On or Off the Base Screening

You can select to turn on or off the call screening on the base using the TAM SETTINGS

menu on your handset.

1. Press <MENU/OK> and <UP/DOWN> to select ANS. MACHINE.

2. Press <MENU/OK> and <UP/DOWN> to select TAM SETTINGS.

3. Press <MENU/OK> and <UP/DOWN> to select BS SCREENING.

4. Press <MENU/OK> and <UP/DOWN> to select ON or OFF.

5. Press <MENU/OK> to confirm.

10.6.7 Change the 4-Digit Remote Access PIN

Your phone lets you check your messages, or otherwise operate your answering machine,

by calling the answering machine when you are away from home and then dialling a 4-digit

remote access PIN from a tone-dialling phone.

The 4-digit remote access PIN code is used to prevent other people from unauthorized

access of your answering machine.

1. Press <MENU/OK> and <UP/DOWN> to select ANS. MACHINE.

2. Press <MENU/OK> and <UP/DOWN> to select TAM SETTINGS.

3. Press <MENU/OK> and <UP/DOWN> to select CHANGE PIN.

4. Press <MENU/OK> to show PIN? ----, then enter the Old PIN.

(Default Remote Access PIN is 0000).

5. Press <MENU/OK> to show NEW PIN? ----, then enter your new 4-digit PIN.

6. Press <MENU/OK> to show CONFIRM? ----, then enter your new 4-digit PIN again.

Note: If the new PIN entered in Step 6 is not the same as the new PIN entered in

Step 5, you must enter the new PIN again in Step 5.

7. Press <MENU/OK> to reconfirm.

When your answering machine memory is full and the answer mode is in ANS & RECORD,

the answer mode will change to ANSWER ONLY automatically. It will change to ANS &

RECORD mode automatically after some messages have been deleted.

Using the corded base:

10.8 Switching the TAM On/Off

10.8.1 Using the Direct Key

If the TAM is turned off, the TAM ON/OFF Indicator will be turned off if there are no new

messages.

1. Press to switch TAM on.

10.8.2 Using the Menu

1. Press <MENU/OK> and <UP/DOWN> to select ANS. MACHINE.

2. Press <MENU/OK> and <UP/DOWN> to go to TAM ON/OFF and press

<MENU/OK> to select.

3. Press <UP/DOWN> to select between ON and OFF then <MENU/OK> to select.

10.9 Outgoing Message Settings

10.9.1 Record your Outgoing Message (OGM)

You can record your own OGM for ANS & REC mode or ANSWER ONLY mode. When

you record your own OGM, it will be used when the answering machine answers the call.

If your personalized OGM is deleted, the pre-set OGM will be restored automatically.

10.9.1.1 Using the direct key

10.9.1.1.1 Record your personal OGM for Answer and Record mode

1. If you want to record your own ANS & REC message, make sure ANS & REC mode

is set. (see section 10.10)

2. Press and hold until you hear a beep and RECORDING appears on the Base

display.

Then speak clearly from about 30cm (12 inches) away from the base to start

recording your personal OGM.

3. When you want to end the recording, press the button. The base will playback

your new ANS & REC message and display PLAYING OGM.

10.9.1.1.2 Record your Personal OGM for Answer Only mode

If you want to record your own personal OGM for Answer Only mode, please make sure

ANSWER ONLY mode is set. (see section 10.10) Repeat the procedure in section

10.9.1.1.1 to record your personal ANSWER ONLY message.

10.9.1.2 Using the Menu

1. Press <MENU/OK> and <UP/DOWN> to select ANS. MACHINE.

2. Press <MENU/OK> and <UP/DOWN> to select TAM SETTINGS.

2. Press <MENU/OK> and <UP/DOWN> to select OGM SETTINGS.

2. Press <MENU/OK> and <UP/DOWN> to select ANS & REC or ANSWER ONLY.

3. Press <MENU/OK> and <UP/DOWN> to select RECORD.

4. Press <MENU/OK> to start recording your personal OGM and “RECORDING” is

displayed on the screen.

5. Press <MENU/OK> to stop and save your personal OGM.Your newly saved OGM

will playback automatically.

10.9.2 Playback the Outgoing Message (OGM)

10.9.2.1 Using the direct key

Press briefly to listen to the current OGM (ANS & REC or ANSWER ONLY).

10.9.2.2 Using the Menu

1. Press <MENU/OK> and <UP/DOWN> to select ANS. MACHINE.

2. Press <MENU/OK> and <UP/DOWN> to select TAM SETTINGS.

3. Press <MENU/OK> and <UP/DOWN> to select OGM SETTINGS.

4. Press <MENU/OK> and <UP/DOWN> to select ANS & REC or ANSWER ONLY.

5. Press <MENU/OK> and <UP/DOWN> to select PLAYBACK.

6. Press <MENU/OK> to playback your current OGM and “PLAYING OGM” is

displayed on the screen.

7. Press <MENU/OK> to stop the OGM playback and return to the previous menu.

Note: If a personal OGM has not been recorded, the pre-set OGM will be played.

10.9.3 Delete a Personal OGM (Set OGM to DEFAULT)

10.9.3.1 Using the direct key

When the OGM is playing, press to delete your personal OGM and return to previous

menu and the pre-set OGM is restored automatically.

Note: If a pre-set OGM is playing, you are not allowed to delete it, so pressing will just

stop the playback and return to the previous menu.

10.9.3.2 Using they Menu

1. Press <MENU/OK> and <UP/DOWN> to select ANS. MACHINE.

2. Press <MENU/OK> and <UP/DOWN> to select TAM SETTINGS.

3. Press <MENU/OK> and <UP/DOWN> to select OGM SETTINGS.

4. Press <MENU/OK> and <UP/DOWN> to select ANS & REC or ANSWER ONLY.

5. Press <MENU/OK> and <UP/DOWN> to select DEFAULT.

6. Press <MENU/OK> to show PIN?, and then enter the system PIN (default 0000).

7. Press <MENU/OK> to replace the current OGM with the default OGM. The display

will then return to previous menu.

10.10 Switch Between OGMs

By default, the answer machine is set in ANS & REC mode which allows callers to leave a

message. This mode can be changed to ANSWER ONLY which does not allow callers to

leave a message. In that case, your callers will be prompted to call back later.

When the answering machine is switched ON, you can select ANS & REC or ANSWER

ONLY.

Using the Menu

1. Press <MENU/OK> and <UP/DOWN> to select ANS. MACHINE.

2. Press <MENU/OK> and <UP/DOWN> to select TAM SETTINGS.

3. Press <MENU/OK> to show ANSWER MODE.

4. Press <MENU/OK> and <UP/DOWN> to select ANS & REC or ANSWER ONLY.

5. Press <MENU/OK> to confirm.

10.11 TAM Messages

10.11.1 Play the TAM messages

If you have new messages, the display will show e.g. 01/02 MSGS, which means you have

1 new message out of a total of 2 messages.

New messages are played first, and then are saved as old messages, until they are

deleted. Old messages are played again after all new messages are played completely.

10.11.1.1 Using the direct key

In idle:

1. Press to listen to messages and memos.

2. Press if you want to stop the playback.

3. Press once if you want to repeat the current message from the beginning, or

press twice to skip back to the previous message during message playback.

4. Press if you want to skip forward to the next message during message

playback.

5. Press if you want to delete the current message being played.

10.11.1.2 Using the Menu

1. Press <MENU/OK> and <UP/DOWN> to select ANS. MACHINE.

2. Press <MENU/OK> to show MSG PLAYBACK.

3. Press <MENU/OK> to start playing back the messages through the speakerphone.

10.11.2 Delete a Message on TAM

1. Press while a message is playing.

2. You will hear a tone and the current message or memo playing will be deleted.

10.11.3 Delete All Messages on TAM

10.11.3.1 Using the direct key

1. In idle mode, press and hold for 2 seconds to delete all old messages.

2. You will hear a tone and all old messages will be deleted.

Note: new messages will not be deleted.

10.11.3.2 Using the Menu

1. Press <MENU/OK> and <UP/DOWN> to select ANS. MACHINE.

2. Press <MENU/OK> and <UP/DOWN> to select DELETE ALL.

3. Press <MENU/OK> to confirm, and display will show “CONFIRM?”.

4. Press <MENU/OK> to reconfirm and the display will return to the previous menu.

Note: You cannot delete New Messages, so you will have to start to play them

before trying to delete them.

10.12 Record a Memo on the TAM

You can record your memo message for another user. When you record a memo, the

message counter will increase by one and the message can be played back in the same

way as answering machine messages. Memo recording can still function even when the

answering machine is turned off.

10.12.1 Using the direct key

1. Press and hold and the display will show "MEMO". Release the button and

start talking when the display shows "RECORDING" and the current recording time.

2. When you want to end your memo recording, press .

3. When you want to end your memo recording, press .

OR press at any time to stop the memo without saving it.

10.12.2 Using the Menu

1. Press <MENU/OK> and <UP/DOWN> to select ANS. MACHINE.

2. Press <MENU/OK> and <UP/DOWN> to select MEMO.

3. Press <MENU/OK> to start recording the memo, and RECORDING and a timer are

shown on the display.

4. Press <MENU/OK> to end your memo recording and the memo will then play back.

Let it play to the end or press <MENU/OK> again to stop the playback and save the

message.

OR press <C> at any time to stop the memo without saving it.

Note: If the memory becomes full, during the memo recording, you will hear a tone,

the recording will stop and the memo recorded will start to play back.

10.13 Incoming Call Messages (ICM)

If the answering machine is ON and set for ANS & REC, when there is an incoming call, the

answering machine will answer it and play the OGM, followed by a beep sound. The caller

can then leave a message. The caller's voice will also be played through the loudspeaker

on the base station, to allow you to screen the call and decide if you want to leave the

answering machine to record the message, or if you want to talk to the caller directly.

At any time if you want to pick up the call, you can lift up the corded handset or press

<SPEAKERPHONE> to intercept the call and talk to the caller directly. The message

recording will be stopped automatically. If the answering machine is in the process of

recording, the message already stored will be saved.

• You can use the corded handset, the speakerphone or the cordless handset to intercept

the call to speak to the caller during ICM recording. Then the message that is currently

being recorded will be saved as a new message.

10.14 TAM Settings

10.14.1 Set the Answer Delay

You can set the number of rings before the answering machine answers and starts playing

your OGM.You can set the answering machine to answer after two to eight rings or TIME

SAVER.

When you ring in to access your messages remotely, if your answering machine is set to

time saver, it will answer after 2 rings if you have new messages, or after 4 rings if you do

not have any new messages, so if you call in and don't get an answer after 2 or 3 rings, you

can hang up and save on call charges.

1. Press <MENU/OK> and <UP/DOWN> to select ANS. MACHINE.

2. Press <MENU/OK> and <UP/DOWN> to select TAM SETTINGS.

3. Press <MENU/OK> and <UP/DOWN> to select ANSWER DELAY.

4. Scroll <MENU/OK> and <UP/DOWN> to select the desired answer delay from the

available options 2 RINGS, 4 RINGS, 6 RINGS, 8 RINGS or TIME SAVER.

5. Press <MENU/OK> to confirm.

10.14.2 Set the Recording Time of Incoming Message

You can set the maximum length of the recording time of the incoming messages to be

either 1, 2 or 3 minutes, or of unlimited length up to the available memory left on the

answering machine.

1. Press <MENU/OK> and <UP/DOWN> to select ANS. MACHINE.

2. Press <MENU/OK> and <UP/DOWN> to select TAM SETTINGS.

3. Press <MENU/OK> and <UP/DOWN> to select RECORD TIME.

4. Press <MENU/OK> and <UP/DOWN> to select your desired recording time from the

available options 60S, 120S, 180S or UNLIMITED.

5. Press <MENU/OK> to confirm.

10.14.3 Set the Outgoing Message Language

The answering machine announces the outgoing message when it answers a call.

There is a pre-set OGM for each of ANS & REC mode or ANSWER ONLY mode, the

language of this preset OGM can be selected on this model.

1. Press <MENU/OK> and <UP/DOWN> to select ANS. MACHINE.

2. Press <MENU/OK> and <UP/DOWN> to select TAM SETTINGS.

3. Press <MENU/OK> and <UP/DOWN> to select TAM LANGUAGE.

4. Press <MENU/OK> and <UP/DOWN> to select your desired OGM language.

5. Press <MENU/OK> to confirm.

10.14.4 Turn On or Off the Base Screening

You can select to turn on or off the call screening on the base.

1. Press <MENU/OK> and <UP/DOWN> to select ANS. MACHINE.

2. Press <MENU/OK> and <UP/DOWN> to select TAM SETTINGS.

3. Press <MENU/OK> and <UP/DOWN> to select BS SCREENING.

4. Press <MENU/OK> and <UP/DOWN> to select ON or OFF.

5. Press <MENU/OK> to confirm.

10.14.5 Activate Remote Access

Your phone lets you check your messages, or otherwise operate your answering machine,

by calling the answering machine when you are away from home and then dialling a 4-digit

remote access PIN from a tone-dialling phone, provided the Remote Access is turned on.

1. Press <MENU/OK> and <UP/DOWN> to select ANS. MACHINE.

2. Press <MENU/OK> and <UP/DOWN> to select TAM SETTINGS.

3. Press <MENU/OK> and <UP/DOWN> to select REMOTE ACC.

4. Press <MENU/OK> and <UP/DOWN> to select ON or OFF to turn on or off the

remote access respectively.

5. Press <MENU/OK> to confirm.

10.14.6 Change the Compression Rate

Three different compression rates (HIGH, MEDIUM and LOW) are provided for you to

select different quality levels of recording incoming message. The lower the compression

rate, the higher the recording quality level attained, but the shorter the total recording time

available. (LOW = 20 minutes, MEDIUM = 30 minutes, HIGH = 50 minutes approximately.)

1. Press <MENU/OK> and <UP/DOWN> to select ANS. MACHINE.

2. Press <MENU/OK> and <UP/DOWN> to select TAM SETTINGS.

3. Press <MENU/OK> and <UP/DOWN> to select COMPRESSION.

4. Press <MENU/OK> and <UP/DOWN> to select your desired compression rate.

5. Press <MENU/OK> to confirm.

10.14.7 Change the 4-Digit Remote Access PIN

Your phone lets you check your messages, or otherwise operate your answering machine,

by calling the answering machine when you are away from home and then dialling a 4-digit

remote access PIN from a tone-dialling phone.

The 4-digit remote access PIN code is used to prevent other people from unauthorised

access of your answering machine.

1. Press <MENU/OK> and <UP/DOWN> to select ANS. MACHINE.

2. Press <MENU/OK> and <UP/DOWN> to select TAM SETTINGS.

3. Press <MENU/OK> and <UP/DOWN> to select CHANGE PIN.

4. Press <MENU/OK> to show PIN?, and enter the old PIN.

(Default Remote Access PIN is 0000).

5. Press <MENU/OK> to show NEW PIN, then enter your new 4-digit PIN.

6. Press <MENU/OK> to show REPEAT, then enter your new 4-digit PIN again.

7. Press <MENU/OK> to confirm the change.

10.14.8 Reset TAM to Default Settings

You can reset your answering machine to the default settings, without deleting any

messages.

1. Press <MENU/OK> and <UP/DOWN> to select ANS. MACHINE.

2. Press <MENU/OK> and <UP/DOWN> to select TAM SETTINGS.

3. Press <MENU/OK> and <UP/DOWN> to TAM DEFAULT.

4. Press <MENU/OK> and the display will show “PIN ?”, and then enter the system

PIN code. (Default is 0000)

5. Press <MENU/OK> to restore the TAM settings to default.

10.7 Remote Operations

If you are away from your home, you can call your answering machine to switch on or off

the answering machine and listen to your messages remotely using another tone-dialling

phone.

1. Place a call from a tone-dialling phone.

2. When the answering machine answers the call and starts playing the OGM, press the

< *> key.

Note: The < *> can be entered during or after the OGM, and the 4-digit PIN should follow

without any delays.

3. Enter the 4-digit Remote Access PIN (default value 0000).You will hear a single beep if the

4 digits are accepted, or a multiple beep if it they are not.

Note: If the 4-digit Remote Access PIN is entered incorrectly three times consecutively,

the line will be released automatically.

4. Press the following keys to carry out your desired function.

Nota: If your answering machine is switched off, the phone will answer the call after

14 rings. You can press < *> and then enter the 4-digit remote access PIN

(Default Remote Access PIN is 0000) to activate the remote access feature.

When using your telephone equipment, basic safety precautions should always be followed

to reduce the risk of fire, electric shock and injury, including the following:

1) Read and understand all the instructions.

2) Follow all warnings and instructions marked on the product.

3) Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners

or aerosol cleaners. Use a damp cloth for cleaning.

4) Keep this product away from hot, humid conditions or strong sunlight, and don't let it

get wet or use it near water (for example, near a bath tub, shower, kitchen sink,

swimming pool).

5) Do not overload wall outlets and extension cords as this can result in the risk of fire

or electric shock.

6) NEVER use this product outdoors during a thunderstorm. Unplug the base from the

telephone line and the mains socket when there are storms in your area. Damage

caused by lightning is not covered by the guarantee.

7) Do not use the telephone to report a gas leak in the vicinity of the leak.

8) Use only the supplied NiMH (Nickel Metal Hydride) batteries! The operation periods

for the handsets are only applicable with the default battery capacities.

9) The use of other battery types or non-rechargeable batteries/primary cells can be

dangerous. These may cause interference and/or unit damages. The manufacturer

will not be held liable for damage arising from such non-compliance.

10) Do not use third party charging bays. Damage may be caused to the batteries.

11) Make sure the batteries are fitted into the handset in the correct polarity.

12) Dispose of batteries safely. Do not immerse them in water, burn them, or put them

where they could get punctured.

Package contents

The package contains the following items:

• 1 Handset

• 1 Base station

• 1 Charger Pod with connected AC power adapter

• 1 AC power adapter

• 1 Telephone line cord

• 2 Rechargeable Batteries

• 1 User manual

To use your cordless handset and base together, you must be able to establish a radio link

between them. The signal between the handset and base is in accordance with the normal

standards for a DECT phone: maximum range up to 300 metres outdoors or 50 metres

indoors.

The signal range may decrease if there is any large metal object between the handset and

the base, such as a refrigerator, a mirror, a filing cabinet, metallic doors or reinforced

concrete. The signal strength may also be reduced by other solid structures like walls, or by

other radio or electrical interference.

The store where you bought your telephone can also provide you with information and after-sales

support.

a. Check the connections.

Unplug and plug back in the mains.

Check that the telephone line cord

has been plugged into the base

station and the phone socket.

b. Check the base station plug and

the 230V plug (remove and

plug-in).

c. Wait until the line is unoccupied.

d. Use the original telephone line

cord supplied.

Insert the dialling prefix.

Reduce the range.

Connect base station to mains.

Check your Subscription with

network or change the dial mode.

Recharge battery.

Turn on the answering machine.

a. Turn on the answering machine.

b. Erase unnecessary messages.

c. Change to Answer & Record mode.

a. If you forget the remote access

code, reset to the default settings.

b. Press each key firmly.

c. Turn on the Remote Access via

the Answering Machine menu.

d. Try again using a touch tone.

Answer the incoming call and try

again to record your outgoing

message later.

a. The connection cord of the

base station is not plugged in.

b. The adapter cord is not

plugged in correctly in the

base station.

c. The line is busy, as another

handset is used.

d. Wrong telephone line cord.

Dialling prefix is needed.

a. Base station out of range.

b. Base station not connected

to mains.

Service not activated or wrong

operator or wrong setting.

Empty battery.

The answering machine is

turned off.

a. The answering machine is

turned off.

b. Message memory is full.

c. Answer Only mode is set.

a. You are entering the wrong

remote access code.

b. You are pressing the dial keys

too quickly.

c. The Remote Access option is

turned off.

d. You are using a pulse

telephone.

A call is being received.

No dialling tone when

pressing the <TALK> key

When connected to a

PBX, no and/or wrong

connection after dialling.

"SEARCHING" is

displayed.

The call does not work.

No display.

Answering Machine

The unit does not record

new messages.

The caller cannot leave a

message.

I cannot operate the

answering machine

remotely.

While recording an outgoing

message or listening to

messages, the unit rings and

recording stops.

As a general rule, if a problem occurs, remove the batteries from all the handsets in your

installation for about 1 minute, then disconnect and reconnect the power supply to the base

and reinstall the handset batteries. In the event of an electrical hazard, the mains adapter acts as 230V power isolating device.

It should therefore, as a precaution, be installed close to the appliance and be easily

accessible. To disconnect the device from the primary power source, the mains adapter

must be removed from the 230V AC / 50 Hz socket.

If the mains adapter fails, it must be replaced by an identical model.

If not connected to the mains power, or if there is a mains power failure, telephones that

use cordless handsets will not work.

You will then be unable to make or receive calls in the event of an emergency.

This is why we recommend that you also keep a conventional telephone – one that doesn’t

require a power supply – as a backup.

! Do not use your telephone to notify a gas leak when standing in the vicinity of the

leak.

It is recommended that you avoid using this device during electrical storms. Do not attempt

to open the batteries, as they contain chemical substances. In the event of leakage, avoid

contact with the skin, eyes, nose and mouth. In the event of contact, rinse the affected part

for about twenty minutes with running water and seek urgent medical attention. Clean the

product with absorbent paper or a dry cloth and contact your reseller for replacement

batteries.

ATLINKS hereby declares that the Office 1350 combo conforms to the essential

requirements and other applicable provisions of European directive 1999/5/EC.

11 TROUBLESHOOTING 12 SAFETY

Office 1350 Combo

TABLE OF CONTENTS

This symbol means that your inoperative electronic appliance must be collected

separately and not mixed with the household waste. The European Union has

implemented a specific collection and recycling system for which producers are

responsible.

This appliance has been designed and manufactured with high quality materials and

components that can be recycled and reused. Electrical and electronic appliances are

liable to contain parts that are necessary in order for the system to work properly but which

can become a health and environmental hazard if they are not handled or disposed of in

the proper way. Consequently, please do not throw out your inoperative appliance with the

household waste.

If you are the owner of the appliance, you must deposit it at the appropriate local collection

point or leave it with the vendor when buying a new appliance.

- If you are a professional user, please follow your supplier's instructions.

- If the appliance is rented to you or left in your care, please contact your service provider.

Keen to preserve the environment, ATLINKS has equipped this appliance with a switching

power supply, offering better energy efficiency. The advantages include not only very low

electricity consumption, but also a more compact format than the conventional power

supply units used by the previous range.

The used batteries from your telephone (if it has batteries) must be disposed of in compli-

ance with current environmental protection regulations. Comply with your local regulations.

Return your batteries to your reseller or dispose of them at an approved recycling centre.

Help us protect the environment in which we live!

13 ENVIRONMENT

* Value may vary according to environment.

** Depending on initial battery charge.

Up to 300 meters*

Up to 50 meters*

Standby: 100 hours**

Talking: 7 hours**

Up to 5

Yes

Ten Pao - S004LB0600045 / S004LV0600045

Input : 100-240VAC 50/60 Hz 150 mA Output

6VDC 450mA

Ten Pao - S004LB0600030 / S004LV0600030

Input 100-240VAC 50/60Hz 150mA, Output 6VDC

300mA

Only use the adapters supplied with the telephone.

Single-phase AC, excluding IT installations defined

by the EN 60950 standard.

Caution: the network voltage is classified as a

hazard by the criteria of this standard.

Appliance designed for connection to a TNV3

class (telecommunications network voltage)

analogue telephone line as defined by the EN

60950 standard.

GPI - VT40AAAHC 2 x1.2V

AAA size 400mAh NiMH

BYD - H-AAA400A 2 x1.2V

AAA size 400mAh NiMH

CORUN - AAAJ400 2 x 1.2

AAA Size 400mAh NiMH

Only use the batteries supplied with the telephone.

Using any other type of battery presents a risk of

explosion. Used batteries must be disposed of in

compliance with current environmental protection

regulations.

From 5 to 40° C

Steady when the handset is in range of the base.

Flashes when out of range of the base or not registered to the base.

Steady when an intercom is in progress.

Flashes when there is an incoming internal call.

Indicates a call is in progress.

Indicates that handsfree is being used.

Indicates when the telephone answering machine (TAM) is turned on.

Flashes when new TAM messages are received.

Indicates that the ringer is switched off.

Steady when an alarm is set. Flashes when an alarm time is reaches.

Indicates that the keypad is locked.

Indicates when you have a new Voice Mail message. (Subject to subscription and to

technical availability of the service from the fixed line operator.)

When not on a charger, indicates the battery is fully charged.

When on a charger, the whole icon flashes while the battery is being charged,

but when the battery is fully charged, only the internal block of the icon flashes.

When not on the charger, indicates the battery needs charging.

Flashes when low battery power level is detected, including when first put on charge.

Indicates when there are more characters or numbers in front of those being

displayed.

Indicates when there are more characters or numbers after those being displayed.

3.2 Display Icons and Symbols of Cordless Phone

FLASH (Recall)

In idle / predialling mode: Press to

insert a recall signal (also called Flash)

During a call: Press to send a recall

signal (also called Flash)

EARPIECE

3 GETTING TO KNOW YOUR PHONE

3.1 Overview of the Handset

In idle mode: Press to access the call list

In menu mode: Press to scroll up the

menu items

In Phonebook list / Redial list / Call

List: Press to scroll up the list

During a call: Press to increase the

earpiece or speaker volume

During ringing: Press to increase the

ringer volume

RIGHT SOFT KEY

In main menu mode: Press to go

back to idle screen

In sub-menu mode: Press to go back

to previous level

In sub-menu mode: Press and hold to

go back to idle screen

In editing / predialling mode: Press to

clear a character / digit

In editing / predialling mode: Press

and hold to delete all the characters/

digits

During a call: Press to mute / unmute

the microphone

In idle mode: Press to intercom

another handset

STAR KEY/HASH KEY/

0 KEY

*key in idle mode: Press

and hold to enable or disable

the keypad lock

*key during a call (in Pulse

mode): Press to switch to

tone mode

# key in Idle mode: Press

and hold to turn on / off the

handset ringer

# key in Call List mode:

Press to review caller's

number if applicable

0 key in idle / predialling /

number editing mode: Press

and hold to insert a pause

SPEAKERPHONE

During a call: Press to turn on / off the speakerphone.

In Idle mode / Predialling mode /

Redial list / Call List / Phonebook entry:

Press to make a call with speakerphone

During ringing: Press to answer a call with speakerphone

OFF

During a call: Press to end a call and

go back to idle screen

In menu / editing mode: Press to go

back to previous menu

In menu / editing mode: Press and

hold to go back to idle screen

In idle mode: Press and hold to power

off the handset

In idle mode (when the handset is

powered off): Press and hold to power

on the handset

The LCD display gives you information on the current status of the telephone.

3.3 CORDED BASE STATION 8 PLAY / STOP ( )

In idle mode: Press to playback messages.

During TAM message playback: Press to stop playing messages.

9 0 KEY

In predial or editing mode: Press and hold "0" to insert a pause.

10 CLEAR/MUTE ( )

In main menu mode: Press to go back to idle screen.

In sub-menu mode: Press to go back to previous level.

In editing / predialling mode: Press to clear a character / digit.

During a call: Press to mute / unmute the microphone.

During ringing: Press to silence.

11 CALLS ( )

In idle mode: Press to access the call list.

In editing mode: Press to move the cursor one character to the right.

12 INT (INTERCOM)

In idle mode: Press to make an internal call.

13 SPEAKERPHONE

In idle mode or Phonebook/ Call list/ Redial list view mode: Press to make a call with

speakerphone.

14 (DOWN)

In idle mode: Press to access the Redial List.

In menu mode: Press to scroll down the menu items.

In Phonebook list / Redial list / Call Log: Press to scroll down the list.

During a call or TAM message playback: Press to decrease the volume.

15 DELETE

In TAM message playback mode: Press to delete the message playing.

In idle mode: Press and hold to delete all old TAM messages.

16 FWD / MEMO ( )

In idle mode: Press and hold to record a Memo.

In TAM message playback mode: Press to skip forward to play the next message.

17 TAM ON/OFF Indication

On steady when the answering machine is turned on and there are no new messages.

Flashes when there is a new message.

3.5 Corded Base LCD Display

Icons Description

Indicates a call is in progress.

Indicates that handsfree is being used.

Indicates the time of day.

Indicates that the base ringer volume is switched off.

This will display when you are in the phonebook menu.

Indicates when you have a new Voice Mail message.

This will display when the same caller has called more than once.

Indicates the sequence number of the CID record.

This will display when there is a new CID entry or if one is being viewed.

1 LCD DISPLAY

2 UP

In menu mode: Press to scroll up the menu items.

In Phonebook list / Redial list / Call List: Press to scroll up the list.

During a call or TAM message playback: Press to increase the volume.

3 MENU/OK (OK/MENU)

In idle mode: Press to access the main menu.

In sub-menu mode: Press to confirm the selection.

In Redial List / Call List: Press for sub-menu.

In Call Screening: Press to activate the Call Screening when Call Screening is set to off.

4 PHONEBOOK

In Idle mode: Press to access phonebook list.

In editing mode: Press to move the cursor one character to the left.

5 ANS ON/OFF ( )

In Idle mode: Press to switch the answering machine ON or OFF.

6 RECALL (FLASH) ( )

In predial mode or during a call: Press to insert a Recall (Flash) signal.

7 REPEAT / OGM ( )

In Idle mode: Press and hold to record OGM.

Press to playback OGM.

In TAM message playback mode: Press once to repeat the current message, or twice to go

back to the previous message.

Functions

Keys

While message is not playing While message is playing

Delete the current message playing.

Repeat playing the current message

from the beginning. Press twice to skip

backward to play the previous message.

Play the message Stop the current message playback

Skip to play the next message

Turn on the answering machine

Stop the current message playback

Turn off the answering machine

Problem Cause Solutions

Power supply cord

Connect the corded

handset

Phone line cord

The manufacturer reserves the right to modify the specifications of its products in order to make

technical improvements or comply with new regulations.

ALCATEL and ATLINKS are registered trademarks.

The Alcatel logo and Alcatel name are trademarks of Alcatel and used under licence by ATLINKS.

www.atlinks.com

ATLINKS Europe

22 quai Gallieni

92150 Suresnes- France

Model Office 1350 Combo

Office 1350 Combo Duo / Trio G1

A/W No.: 10000200 Rev.0 (EN)

Printed in China

2 3 4 5 6 7 98 10

12 13 14 15 16 17 1918 20

29 30

2221

23 24 25 26 27 28

39 40

33 34 35 36 37 38

49 50

4241 43 44 45 46 47 48

59 60

5251 53 54 55 56 57 58

3231

1 IMPORTANT SAFETY INSTRUCTIONS ............................................................... 5

2 INSTALLING YOUR PHONE ................................................................................. 7

2.1 CONNECTING THE CORDED BASE STATION .................................................... 7

2.2 INSTALLING THE CORDLESS HANDSET AND CHARGING THE BATTERIES .. 8

3 GETTING TO KNOW YOUR PHONE ..................................................................... 9

3.1 OVERVIEW OF THE HANDSET ............................................................................ 9

3.2 DISPLAY ICONS AND SYMBOLS OF CORDLESS PHONE ................................ 10

3.3 CORDED BASE STATION ..................................................................................... 11