Allen-Bradley 1203 Series Bedienungsanleitung

Looking for more information?

Visit

on the

web

at http://www.artisan-scientific.com for more information:

•

Price

Quotations •

Drivers·

Technical

Specifications.

Manuals and Documentation

Artisan

Scientific

You~

Source

for:

Quality

New

and

Certified-Used/Pre:-awned ECJuiflment

•

Tens

Thousands

In-Stock

Items

•

Hundreds

Manufacturers

Supported

•

Fast

Shipping and

DelIve1y

•

Leasing

/Monthly

Rentals

•Equipment Demos

•

Consignment

Service Center Repairs

Experienced Engineers and Technicians

staff

our

State-of-the-art Full-Service In-House Service Center Facility

InstraView Remote Inspection

Remotely inspect equipment before purchasing with

our

Innovative InstraView-website at http://www.instraview.com

bUy

used

equipment!

also

offer

credit

for

Buy-Backs

and

Trade-Ins

Sell

your

excess.

underutilized. and idle used equipment. Contact one

our

Customer

Service

Representatives todayl

Talk to alive person: 88EM38-S0URCE fB88-887-68721 IContact

email: [email protected] IVisit ourwebsite: http://www.artisan-scientific.com

User Manual

Bulletin 1203

Remote I/O

Communications

Module

Cat. Nos. 1203-GD1,

1203-GK1, or 1336-GM1

Firmware 1.xx – 4.xx

Allen-Bradley

Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com

Important User Information

Because of the variety of uses for the products described in this

publication, those responsible for the application and use of this

control equipment must satisfy themselves that all necessary steps

have been taken to assure that each application and use meets all

performance and safety requirements, including any applicable laws,

regulations, codes and standards.

The illustrations, charts, sample programs and layout examples

shown in this guide are intended solely for purposes of example.

Since there are many variables and requirements associated with any

particular installation, Rockwell Automation does not assume

responsibility or liability (to include intellectual property liability) for

actual use based upon the examples shown in this publication.

Rockwell Automation publication SGI-1.1, Safety Guidelines for the

Application, Installation, and Maintenance of Solid-State Control

(available from your local Rockwell Automation office or online at

www.ab.com/manuals/gi), describes some important differences

between solid-state equipment and electromechanical devices that

should be taken into consideration when applying products such as

those described in this publication.

Reproduction of the contents of this copyrighted publication, in

whole or in part, without written permission of Rockwell

Automation, is prohibited.

Throughout this manual we use notes to make you aware of safety

considerations:

Attention statements help you to:

•Identify a hazard.

•Avoid the hazard.

•Recognize the consequences.

Important: Identifies information that is critical for successful

application and understanding of the product.

ATTENTION: Identifies information about practices

or circumstances that can lead to personal injury or

death, property damage or economic loss.

Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com

Summary of Changes

The information below summarizes the changes made to this manual

since the last release.

Updated Information

This manual incorporates the information found in the following two

manuals:

•Bulletin 1203 Remote I/O Communication Module Getting

Started Manual, Publication 1203-5.1.

•Bulletin 1203 Remote I/O Communications Module Reference

Manual, Publication 1203-5.0.

It also contains new information.

Updates and Additions

The information below summarizes the changes to this manual since

its last release:

Page Description

2-5 Important statement added:

Injury or equipment damage can result from loss of PLC or Controller Logic

Commands (Stop, Start, etc.) when all these conditions are true:

- module firmware 3.04 or lower.

- 230.4k baud rate.

- block transfer is enabled (DIP switch SW3-1 is ON).

- block transfers to the module are used (in the ladder program or by DriveTools/

DriveTools32 using a Remote I/O pass thru connection).

Do not use the 230.4k baud rate if you are using a module with 3.04 or earlier

firmware and your program uses block transfers. Use the 57.6k or 115.2k baud

rate instead.

2-6 Attention statement added:

Due to an anomaly in firmware release 4.01, Remote I/O modules that are used

only for block transfer messages require the following configuration: switches for

block transfer and reference/feedback should both be enabled (SW 3.1 and SW

3.3 are ON. SW 3.2 and SW 3.4 through 3.8 are OFF).

This configuration prevents a fault on power up. It does not affect rack I/O

allocation or the ladder logic program because it still fits within 1/4 rack I/O space.

The drive will, however, generate a serial fault if the communications module is

disconnected or loses power.

Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com

End of Summary of Changes

Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com

Table of Contents

Preface

Using This Manual Preface Objectives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P-1

Audience for This Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P-1

Purpose of This Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P-1

Firmware Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P-1

Terms and Abbreviations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P-2

Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P-3

Rockwell Automation Support. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P-4

Chapter 1

Overview Chapter Objectives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1

Description of the Remote I/O Communications Modules . . . . . . . . . . . . 1-1

Features of the Communications Module . . . . . . . . . . . . . . . . . . . . . . . . . 1-2

Compatibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3

Hardware Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4

Required Tools and Equipment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6

Overview of Setting Up the Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6

Chapter 2

Configuring the Module Chapter Objectives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1

Safety Precautions and Important Information . . . . . . . . . . . . . . . . . . . . . 2-1

Locating the DIP Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2

Factory-Default Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3

Quick Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3

Configuring the module. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4

Setting Switches on SW3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5

Setting Switches on SW2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-8

Setting Switches on SW1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-12

Chapter 3

Installing the Module Chapter Objectives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1

Selecting Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1

Selecting a Termination Resistor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2

Installing a 1203-GD1 or 1203-GK1 Module. . . . . . . . . . . . . . . . . . . . . . . 3-3

Installing a 1336-GM1 Board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-6

Chapter 4

Creating Ladder Logic

Programs

Chapter Objectives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1

Understanding the I/O Image Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1

Control Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2

Datalinks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2

Settings for the Ladder Logic Program Examples. . . . . . . . . . . . . . . . . . . 4-5

Example PLC Ladder Logic Program . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-8

Example SLC Ladder Logic Program . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-10

Example Logix5550 Ladder Logic Program . . . . . . . . . . . . . . . . . . . . . . 4-12

Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com

ii Table of Contents

Chapter 5

Using Block Transfer Messages Chapter Objectives. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1

Understanding Block Transfer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1

Understanding the Block Transfer Status Word . . . . . . . . . . . . . . . . . . . . . 5-2

Understanding Data Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3

Example PLC Block Transfers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3

Example SLC Block Transfers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-5

Example Logix5550 Block Transfers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-7

Notes Regarding Block Transfer Programming . . . . . . . . . . . . . . . . . . . . . 5-8

Chapter 6

Troubleshooting Chapter Objectives. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1

LEDs on the Remote I/O Communications Module . . . . . . . . . . . . . . . . . . 6-1

FAULT LED. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-2

SCANport STS LED. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-2

Health LED. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-2

Rem I/O ACT LED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-2

Rem I/O STS LED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-2

Appendix A

Specifications Appendix Objectives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1

1336-GM1 Board Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1

1203-GD1 Module Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-2

1203-GK1 Module Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-2

Appendix B

Supported Block Transfer

Messages

Appendix Objectives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-1

Supported Block Transfer Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-1

Block Transfer Data Structure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-2

Parameter Value Read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-3

Parameter Value Write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-4

Parameter Read Full . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-5

Product ID Number Read. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-8

Scattered Parameter Value Read. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-10

Scattered Parameter Value Write. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-12

Continuous Parameter Value Read . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-14

Save/Recall/Initialize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-16

Fault Command Write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-17

Fault Queue Entry Read Full . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-18

Fault Queue Size Read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-20

Trip Fault Queue Number Read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-21

Block Transfer Quick Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-22

Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com

Preface

Using This Manual

Preface Objectives

Read this preface to familiarize yourself with the rest of the manual.

In this preface, you will read about the following:

• Intended audience for this manual.

• Purpose of this manual.

• Firmware supported by this manual.

• Terms and abbreviations.

• Safety precautions.

• Rockwell Automation support.

Audience for This Manual

Use this manual if you are responsible for setting up and using a

Remote I/O communications module (Bulletin numbers 1203-GD1,

1203-GK1, or 1336-GM1). You must have previous experience with

and a basic understanding of communications terminology,

configuration procedures, required equipment, and safety precautions.

To use this Remote I/O communications module efficiently, you must

be able to program and operate programmable controllers as well as

have a basic understanding of the parameter settings and functions of

the SCANport™ product with which you are communicating.

Purpose of This Manual

This manual is an installation and user guide for the Remote I/O

communications module. The 1203 Remote I/O communications

modules are available for products that include SCANport.

This manual provides the following information:

• An overview of the Remote I/O communications module.

• Procedures that you need to install, configure, and troubleshoot

the Remote I/O communications module.

• Example ladder logic programs for controlling a product and

using block transfer messages.

Important:

You should read this manual in its entirety before

configuring, installing, operating, or troubleshooting the

Remote I/O communications module.

Firmware Support

This manual supports firmware versions 1.xx to 4.xx (the “xx”

designator may vary). Features that work with specific firmware

versions will be identified.

Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com

P–2Using This Manual

Contents of this Manual

Related Documentation

You can obtain documentation about Allen-Bradley products,

including PLC controllers, SLC controllers, Logix5550 controllers,

and drives, from your local Rockwell Automation office or

distributor. You can also access documents online at

http://www.ab.com/manuals

Application notes are available at

http://www.ab.com/drives/stddrives/faxback/faxback.htm

Terms and Abbreviations

The following terms are specific to this product. For a complete

listing of automation terminology, refer to the Rockwell Automation

Industrial Automation Glossary, Publication Number AG-7.1.

Chapter Title Contents

Preface Using This Manual Descriptions of the audience, purpose, back-

ground, and scope of this manual.

1 Overview Features of the Remote I/O communications

module.

2 Configuring the Module Procedures for setting DIP switches.

3 Installing the Module Procedures for mounting, connecting cables, and

connecting power.

4 Creating Ladder Logic

Programs

Information about addressing, information trans-

fer, and sample programs.

5 Using Block Transfer

Messages

Information about messaging and sample pro-

grams.

6 Troubleshooting Information about troubleshooting the module.

A Specifications Environmental, electrical, and communication

specifications.

B Supported Block Transfer

Messages

Information about block transfer messages.

Terms Definition

Controller A solid-state control system that has a user-programmable memory for

storage of instructions to implement specific functions such

as I/O control, logic, timing, counting, report generation, communica-

tion, arithmetic, and data file manipulation. A controller is also called a

“programmable logic controller” or “processor.”

Remote I/O I/O connected to a processor across a serial link. With a serial link,

remote I/O can be located long distances from the processor.

Remote I/O

Communications

Module

This module connects a SCANport product to a Remote I/O link. There

are three types of Remote I/O communications modules: 1203-GD1

module, 1203-GK1 module, and 1336-GM1 board. The Remote I/O

module is also referred to as “adapter,” “module,” and communications

module.”

SCANport A standard peripheral communications interface for various

Allen-Bradley drives and power products.

SCANport

Peripheral

A device that provides an interface between SCANport and a commu-

nications system such as Remote I/O. It is often referred to as an

adapter or communications module. For example, the Remote I/O

module is a SCANport peripheral.

SCANport

Product

A device that uses the SCANport communications interface to commu-

nicate with one or more peripheral devices. For example, a motor drive

such as a 1336 PLUS is a SCANport product.

Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com

Using This Manual P–3

Safety Precautions

!ATTENTION: Only personnel familiar with SCANport

devices and associated machinery should plan or implement

the installation, start-up, configuration, and subsequent

maintenance of the Remote I/O communications module.

Failure to comply may result in personal injury and/or

equipment damage.

!ATTENTION: The 1336-GM1 board contains Electrostat-

ic Discharge (ESD) sensitive parts and assemblies. Static

control precautions are required when handling this assem-

bly. Component damage may result if ESD control proce-

dures are not followed. If you are not familiar with static

control procedures, refer to Allen-Bradley Publication

8000-4.5.2, Guarding Against Electrostatic Damage or any

other applicable ESD protection handbook.

!ATTENTION: Injury or equipment damage can result

from loss of PLC or Controller Logic Commands (Stop,

Start, etc.) when all these conditions are true:

• module firmware 3.04 or lower.

• 230.4k baud rate.

• block transfer is enabled (DIP switch SW3-1 is ON).

• block transfers to the module are used (in the ladder

program or by DriveTools/DriveTools32 using a

Remote I/O pass thru connection).

Do not use the 230.4k baud rate if you are using a module

with 3.04 or earlier firmware and your program uses block

transfers. Use the 57.6k or 115.2k baud rate instead.

!ATTENTION: Hazard of equipment damage exists. If

block transfer messages are programmed to frequently

write parameter data, the EEPROM (Non-Volatile Storage)

will quickly exceed its life cycle and cause the product to

malfunction. Do not create a program that frequently uses

block transfer messages to write parameter data to a

product. Datalinks do not write to the EEPROM and should

be used for frequently changed parameters.

!ATTENTION: Hazard of equipment damage exits.

Firmware version 3.04 has the following anomaly: If DIP

Switch 2-5 is OFF (No Fault), the product remains in its last

state after a communications loss occurs no matter how DIP

Switch 2-4 is set. If you must use zero data, contact

Rockwell Automation Technical Support.

Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Allen-Bradley Steuereinheit Handbücher

Allen-Bradley

Allen-Bradley POINT I/O 1734-4IOL Bedienungsanleitung

Allen-Bradley

Allen-Bradley Rockwell Automation 1734-4IOL Bedienungsanleitung

Allen-Bradley

Allen-Bradley E300 Bedienungsanleitung

Allen-Bradley

Allen-Bradley ControlNet ControlLogix 1756 Bedienungsanleitung

Allen-Bradley

Allen-Bradley MicroLogix 1500 1764-MM1 Bedienungsanleitung

Allen-Bradley

Allen-Bradley 1203-GD1 Stücklistenhandbuch

Allen-Bradley

Allen-Bradley 1771-ODD Bedienungsanleitung

Allen-Bradley

Allen-Bradley 1734-IB8S Bedienungsanleitung

Allen-Bradley

Allen-Bradley DeviceNet 1747-SDN/B Bedienungsanleitung

Allen-Bradley

Allen-Bradley ControlLogix 1756-OA8D Bedienungsanleitung

Allen-Bradley

Allen-Bradley 1732ES-IB16 Bedienungsanleitung

Allen-Bradley

Allen-Bradley 1407-CGCM-DLR Bedienungsanleitung

Allen-Bradley

Allen-Bradley POINT I/O series Bedienungsanleitung

Allen-Bradley

Allen-Bradley DeviceNet 1771-SDN/C Bedienungsanleitung

Allen-Bradley

Allen-Bradley PowerMonitor 500 Bedienungsanleitung

Allen-Bradley

Allen-Bradley CAB6-HA 3 Bedienungsanleitung

Allen-Bradley

Allen-Bradley 2711P-RN6K Bedienungsanleitung

Allen-Bradley

Allen-Bradley 1606-XLBRED20 Bedienungsanleitung

Allen-Bradley

Allen-Bradley MicroLogix 1762-IF4 Bedienungsanleitung

Allen-Bradley

Allen-Bradley ArmorBlock 1732E-16CFGM12M12LDR Bedienungsanleitung

Allen-Bradley

Allen-Bradley ProcessLogix 1757 Series Bedienungsanleitung

Allen-Bradley

Allen-Bradley 1771-KA2 Bedienungsanleitung

Allen-Bradley

Allen-Bradley 1492-IFM40F-3 Bedienungsanleitung

Allen-Bradley

Allen-Bradley 140G-H Bedienungsanleitung

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung