Allen-Bradley 1770-KFDG Bedienungsanleitung
Packing Data PK
Publication 17705.6 - June 1996
DeviceNet
RS232 Interface Module
(Catalog Number 1770-KFD and 1770-KFDG)
To the Installer
The 1770-KFD module is a portable RS-232 communication interface that
provides a host computer access to a DeviceNet
tnetwork.
This document contains this information:
topic page
purpose and audience 2
precautionary statements 2
handling the module 4
terminology 4
related publications 4
contents of your order 5
introduction to the RS232 module 8
communicating on DeviceNet 9
mounting the module 10
supplying power 12
connecting cables via RS232 to a computer 14
connecting cables via RS232 to a modem 16
connecting cables via DeviceNet 17
installing the 1770KFD driver 22
interpreting status indicators 23
specifications 25
support services 26
New or modified information is highlighted by a revision bar.
Installation Instructions
Allen-Bradley
DeviceNet RS-232 Interface Module2
Publication
17705.6 - June 1996
Purpose
Use
this document to learn how to install and use the DeviceNet RS-232
interface module.
Audience
Read this manual before you install or use the DeviceNet RS-232 interface
module. You should be familiar with DeviceNet technology.
Precautionary Statements
Important
User Information
Because
of the variety of uses for the products described in this publication, those responsible
for the application and use of this control equipment must satisfy themselves that all necessary
steps have been taken to assure that each application and use meets all performance and
safety requirements, including any applicable laws, regulations, codes and standards.
The illustrations, charts, sample programs and layout examples shown in this guide are intended
solely for purposes of example. Since there are many variables and requirements associated with
any particular installation, AllenBradley does not assume responsibility or liability (to include
intellectual property liability) for actual use based upon the examples shown in this publication.
AllenBradley publication SGI1.1,
Safety Guidelines for the Application, Installation, and Maintenance
of Solid State Control
(available from your local AllenBradley office), describes some important
dif
ferences between solidstate equipment and electromechanical devices that should be taken into
consideration when applying products such as those described in this publication.
Reproduction of the contents of this copyrighted publication, in whole or in part, without written
permission of AllenBradley Company
, Inc., is prohibited.
Throughout this document we use notes to make you aware of safety considerations:
Attention statements help you to:
ATTENTION:
This notation identifies information about practices or circumstances
that can lead to personal injury or death, property damage or economic loss.
Important:
This notation identifies information that is critical for successful application and
understanding of the product.
S identify
a hazard
S avoid
the hazard
S recognize
the consequences
!
DeviceNet RS-232 Interface Module 3
Publication
17705.6 - June 1996
European Union Directive Compliance
This product has the CE mark and is approved for installation within the
European Union and EEA regions. It has been designed and tested to meet the
following directives.
EMC Dir
ective: This apparatus is tested to meet Council Directive 89/336/EEC
Electromagnetic Compatibility (EMC) using a technical construction file and the
following standards, in whole or in part:
•EN 50081-2 EMC – Generic Emission Standard,
Part 2 – Industrial Environment
•EN 50082-2 EMC – Generic Immunity Standard,
Part 2 – Industrial Environment
The product described in this manual is intended for use in an industrial
environment.
Low V
oltage Directive:
This apparatus is also designed to meet Council
Directive 73/23/EEC Low Voltage, by applying the safety requirements of
EN 61131-2 Programmable Controllers, Part 2 – Equipment Requirements
and
Tests.
For specific information that the above norm requires, see the appropriate
sections in this manual, as well as the following Allen-Bradley publications:
•Industrial Automation Wiring and Grounding Guidelines,
publication 1770-4.1
•Guidelines for Handling Lithium Batteries, publication AG-5.4
•
Automation Systems Catalog, publication B1
11
Allen-Bradley
DeviceNet RS-232 Interface Module4
Publication
17705.6 - June 1996
Handling the Module
ATTENTION:
This RS-232 module uses CMOS technology
, which is highly
sensitive to electrostatic dischar
ge (ESD). ESD may be present whenever you
are handling the module.
T
ake these precautions to guard against electrostatic damage:
•Avoid touching the interface connector pins on the RS-232 module.
•If the module is not in use, store it in the anti-static bag in which it was
shipped.
It is not necessary to wear an ESD wrist strap while handling the 1770-KFD
module.
Terminology
this term means
DeviceNet an open communication network designed to connect control
systems to plant floor devices, e.g., sensors, push buttons,
motor starters, and drives
DeviceNet is based on commercially available technology and
can be used by any company to develop interoperable
products.
node configuration to configure the node address and data rate before a device is
connected to a DeviceNet network
parameter configuration to configure the operational parameters of a DeviceNet device
pointtopoint configuration a twonode DeviceNet network consisting of a 1770KFD
interface module and a device
Related Publications
title publication number
DeviceNet Manager Software User Manual 17876.5.3
DeviceNet Cable System Planning & Installation Manual DN6.7.1
DeviceNet RS232 Interface Module Communication Protocol
Reference Manual
17706.5.22
DeviceNet RS-232 Interface Module 5
Publication
17705.6 - June 1996
Contents of Your 1770KFD Order
With
this package you should receive:
1770KFD
module
unsealed DeviceNet
terminal connector
DIN rail
mounting brackets
DIN rail
mounting bracket screws
6 ft, 9pin Dshell RS232
nullmodem cable
KFD instructions
1770KFD
driver disk
•one DeviceNet RS-232 interface module, catalog no. 1770-KFD
•one 1770-KFD driver diskette
•two DIN rail mounting brackets
•four DIN rail mounting bracket screws
•one 6 ft, 9-pin D-shell RS-232 null-modem cable
•
one unsealed DeviceNet terminal connector
•one copy of publication 1770-5.6, DeviceNet RS-232 Interface Module
Installation Instructions
If you ordered catalog no. 1770-KFDG, your order also includes a global 9V ac
power supply adapter (90 – 260V ac).
If you are missing any of these pieces, contact your Allen-Bradley
sales representative.
Allen-Bradley
DeviceNet RS-232 Interface Module6
Publication
17705.6 - June 1996
Available
options:
•global 9V ac power supply adapter (90 – 260V ac),
which comes with
catalog no. 1770KFDG/A
•domestic 9V ac power supply adapter (120V ac),
which you can or
der
separately as catalog no. 1787USADPTR/A
Each adapter connects to the power supply connector on the 1770-KFD module.
See page
12 for additional information.
DeviceNet RS-232 Interface Module 7
Publication
17705.6 - June 1996
•an 8 ft, 5-pin DeviceNet unsealed probe cable (catalog no. 1787-PCABL),
which you can or
der separately
Probe cable
•a 6 ft, sealed T-tap DeviceNet connector cable (catalog no. 1787-TCABL),
which you can or
der separately
Ttap cable
This
cable connection lets the 1770-KFD module and a device connected to
the module in a point-to-point configuration draw power from the network.
•a 6 ft, unsealed-to-sealed DeviceNet drop cable (catalog no. 1787-MCABL),
which you can or
der separately
Unsealed drop cable
Each cable connects to the 5-pin unsealed receptacle on the 1770-KFD module.
See cable connection information beginning on page 17.
Allen-Bradley
DeviceNet RS-232 Interface Module8
Publication
17705.6 - June 1996
Introducing the 1770KFD Interface Module
The 1770-KFD module, described in Figure 1, is a portable RS-232
communication interface that provides a host computer access to a
DeviceNet network.
host
computer
1770KFD
module
RS232 cable
RS232 serial port
Figure 1
1770KFD
module
9pin Dshell
RS232 connector
5pin unsealed
connector
power
switch
power supply
connector
Network Status
indicator
Module Status
indicator
RS232 Status
indicator
20294
wiring
connection
diagram
Side 1
Side 2
DeviceNet RS-232 Interface Module 9
Publication
17705.6 - June 1996
Communicating on DeviceNet
The 1770-KFD module lets you communicate:
•point-to-point (host computer directly to device via the 1770-KFD module)
The host computer uses a point-to-point connection for node and/or
parameter configuration.
device
host
computer
1770KFD
module
DeviceNet cable RS232 cable
power supply
•via
a DeviceNet network connection
host
computer
1770KFD
module
DeviceNet network
RS232 cable
devices
1771SDN scanner 1747SDN scanner
Allen-Bradley
DeviceNet RS-232 Interface Module10
Publication
17705.6 - June 1996
The 1770-KFD module performs data transmission, management, and local
network diagnostics.
Allen-Bradley DeviceNet Manager software, 1787-MGR, manages data
transmission and reception through the 1770-KFD interface module from a
personal computer (Windowstoperating system).
Mounting the 1770KFD Module
You can mount the module on a DIN rail.
1. Use the four screws to attach the two mounting brackets to the back of the
module.
20296
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Allen-Bradley Steuereinheit Handbücher
Allen-Bradley
Allen-Bradley ControlLogix 1756-DHRIO Bedienungsanleitung
Allen-Bradley
Allen-Bradley ControlNet Ex 1797-RPA Bedienungsanleitung
Allen-Bradley
Allen-Bradley ControlLogix DeviceNet C Series Bedienungsanleitung
Allen-Bradley
Allen-Bradley 1203 Series Bedienungsanleitung
Allen-Bradley
Allen-Bradley DH485/RS-232C Bedienungsanleitung
Allen-Bradley
Allen-Bradley 1756-M02AS Bedienungsanleitung
Allen-Bradley
Allen-Bradley ControlNet 1747-SCNR Bedienungsanleitung
Allen-Bradley
Allen-Bradley 1492-IFM40F-3 Bedienungsanleitung
Allen-Bradley
Allen-Bradley 1492-CM1771-LD006 Bedienungsanleitung
Allen-Bradley
Allen-Bradley PowerFlex 755 Bedienungsanleitung
Allen-Bradley
Allen-Bradley ControlLogix 1756-OX8I Bedienungsanleitung
Allen-Bradley
Allen-Bradley Kinetix 5700 Bedienungsanleitung
Allen-Bradley
Allen-Bradley 2711P-RDT12H Bedienungsanleitung
Allen-Bradley
Allen-Bradley 1756-EN2TSC Bedienungsanleitung
Allen-Bradley
Allen-Bradley FLEX I/O 1794-IV32 Bedienungsanleitung
Allen-Bradley
Allen-Bradley ControlNet 1747-SCNR Bedienungsanleitung
Allen-Bradley
Allen-Bradley FLEX I/O ControlNet 1794-ACN15 Bedienungsanleitung
Allen-Bradley
Allen-Bradley ProcessLogix B Series Bedienungsanleitung
Allen-Bradley
Allen-Bradley SLC 500 BASIC Bedienungsanleitung
Allen-Bradley
Allen-Bradley DF1 Bedienungsanleitung
Beliebte Steuereinheit Handbücher anderer Marken
Festo
Festo Compact Performance CP-FB6-E Stücklistenhandbuch
Elo TouchSystems
Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung
JS Automation
JS Automation MPC3034A Bedienungsanleitung
JAUDT
JAUDT SW GII 6406 Series Kurzanleitung
Spektrum
Spektrum Air Module System Bedienungsanleitung
BOC Edwards
BOC Edwards Q Series Bedienungsanleitung
