Allen-Bradley ArmorBlock 1732E-16CFGM12M12LDR Bedienungsanleitung

ArmorBlock 16-Channel Configurable Digital Module

Catalog Numbers 1732E-16CFGM12M12LDR, 1732E-16CFGM12P5DR

User Manual

Original Instructions

Important User Information

Read this document and the documents listed in the additional resources section about installation, configuration, and

operation of this equipment before you install, configure, operate, or maintain this product. Users are required to

familiarize themselves with installation and wiring instructions in addition to requirements of all applicable codes, laws,

and standards.

Activities including installation, adjustments, putting into service, use, assembly, disassembly, and maintenance are

required to be carried out by suitably trained personnel in accordance with applicable code of practice.

If this equipment is used in a manner not specified by the manufacturer, the protection provided by the equipment may

be impaired.

In no event will Rockwell Automation, Inc. be responsible or liable for indirect or consequential damages resulting from

the use or application of this equipment.

The examples and diagrams in this manual are included solely for illustrative purposes. Because of the many variables and

requirements associated with any particular installation, Rockwell Automation, Inc. cannot assume responsibility or

liability for actual use based on the examples and diagrams.

No patent liability is assumed by Rockwell Automation, Inc. with respect to use of information, circuits, equipment, or

software described in this manual.

Reproduction of the contents of this manual, in whole or in part, without written permission of Rockwell Automation,

Inc., is prohibited

Throughout this manual, when necessary, we use notes to make you aware of safety considerations.

Labels may also be on or inside the equipment to provide specific precautions.

WARNING: Identifies information about practices or circumstances that can cause an explosion in a hazardous

environment, which may lead to personal injury or death, property damage, or economic loss.

ATTENTION: Identifies information about practices or circumstances that can lead to personal injury or death, property

damage, or economic loss. Attentions help you identify a hazard, avoid a hazard, and recognize the consequence.

IMPORTANT Identifies information that is critical for successful application and understanding of the product.

SHOCK HAZARD: Labels may be on or inside the equipment, for example, a drive or motor, to alert people that dangerous

vole may be present.

BURN HAZARD: Labels may be on or inside the equipment, for example, a drive or motor, to alert people that surfaces may

reach dangerous temperatures.

ARC FLASH HAZARD: Labels may be on or inside the equipment, for example, a motor control center, to alert people to

potential Arc Flash. Arc Flash will cause severe injury or death.Wear proper Personal Protective Equipment (PPE). Follow ALL

Regulatory requirements for safe work practices and for Personal Protective Equipment (PPE).

Rockwell Automation Publication 1732E-UM001A-EN-P - December 2019 3

Table of Contents

Important User Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Who Should Use This Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Purpose of This Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Additional Resources . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Chapter 1

Module Information About the Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Module Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Module Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Before You Begin. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Chapter 2

Configure and Startup Download and Register EDS File . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Read the MAC Address. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Set the Network Parameters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Configure the Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Connections and Assembly Objects . . . . . . . . . . . . . . . . . . . . . . . . . 12

Configuration Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Output Fault Delay Configuration. . . . . . . . . . . . . . . . . . . . . . . . . . 13

Configure QuickConnect . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Configure General Parameters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Configure Process Data Direction . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Configure in Logix Designer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Initial Settings of the Connection Parameters . . . . . . . . . . . . . . . . 16

Edit the Module Configuration Common Pages . . . . . . . . . . . . . . . . . 16

General Page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Connection Page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Quick Connect Page. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Module Info Page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Fault/Program Action Page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Configuration Page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Internet Protocol Page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Port Configuration Page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Network Page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Chapter 3

Configure Module Using

Generic Profile

Configure the Module as a Generic Device . . . . . . . . . . . . . . . . . . . . . . 30

Process Data for the Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Output Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Input Data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Configuration Data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Description of Process Data Terms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Tag Name Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

4Rockwell Automation Publication 1732E-UM001A-EN-P - December 2019

Table of Contents

Chapter 4

Diagnostic Properties Channel Error . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Voltage Errors at M12 Slots (Sensor Short-circuit) . . . . . . . . . . . . . . . 36

Overload of Output Drivers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Error in Actuator Power Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Error in System/Sensor Power Supply. . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Appendix A

Interpret Status Indicators Status Indicator Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Status Indicator Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Rockwell Automation Publication 1732E-UM001A-EN-P - December 2019 5

Preface

This manual describes how to use the ArmorBlock® I/O 16-channel configurable

digital module.

Make sure that you are familiar with the following:

• Use of a controller in a Logix 5000™ control system

• Studio 5000 Logix Designer® environment

Who Should Use This

Manual

This manual is intended for trained and qualified personnel who are responsible

for mounting, installation, commissioning, operation, maintenance, and

disassembly of the ArmorBlock I/O 16-channel configurable digital module.

Purpose of This Manual This manual provides information and describes the procedures that are used to

install, wire, troubleshoot, and operate the ArmorBlock I/O 16-channel

configurable digital module.

Additional Resources These resources contain information about related products from

Rockwell Automation.

You can view or download publications at

https://www.rockwellautomation.com/literature/. For publications specific to

your module, search the catalog number of the module. To order paper copies of

technical documentation, contact your local Allen-Bradley distributor or

Rockwell Automation sales representative.

IMPORTANT You must use the RSLogix 5000® and Studio 5000®, version 20.00.00 or later, to

configure the ArmorBlock I/O module.

Resource Description

ArmorBlock I/O 16-Channel Configurable Digital Module

Installation Instructions, publication 1732E-IN008

Describes how to install and wire the ArmorBlock I/O

module.

ArmorBlock I/O Selection Guide, publication 1732-SG001 Provides specifications, wiring diagrams, and module

block diagrams for ArmorBlock I/O modules.

Industrial Automation Wiring and Grounding Guidelines,

publication 1770-4.1

Provides general guidelines for installing a

Rockwell Automation industrial system

Product Certifications website,

https://www.rockwellautomation.com/

rockwellautomation/certification/overview.page

Provides declarations of conformity, certificates, and other

certification details.

6Rockwell Automation Publication 1732E-UM001A-EN-P - December 2019

Preface

Notes:

Rockwell Automation Publication 1732E-UM001A-EN-P - December 2019 7

Chapter 1

Module Information

About the Module The ArmorBlock 16-channel configurable digital module offers easy handling of

I/O data in a higher-level bus system. It is suitable for use in machines and

installations with moderate I/O concentration.

A compact, fully sealed housing made of die-cast zinc helps to protect electronic

components from environmental factors. This makes the module ideal for direct

field service in tough industrial environments.

For connecting the network and I/O, the module uses the widely adopted M12

connector system; A-coded connectors for I/O signals and D-coded connectors

for network communication. For connecting power, the

1732E-16CFGM12M12LDR uses M12, L-coded connectors, while the

1732E-16CFGM12P5DR uses 7/8-inch connectors.

Module Features The ArmorBlock 16-channel configurable digital module provides the following

features:

• Integrated switch

An integrated 2-port Ethernet switch enables the use of bus or star

network topologies. The implemented device level ring (DLR) protocol

enables the design of a highly accessible network infrastructure.

• Redundancy function

The module supports the device level ring (DLR) protocol for ring

topologies. If the connection is interrupted, the module immediately

switches to an alternative ring segment to ensure interruption-free

operation.

• Output Fault Values function

This function enables you to define the behavior of each output channel in

the event of interruption or loss of communication.

Topic Page

About the Module 7

Module Features 7

Module Overview 8

BeforeYou Begin 8

8Rockwell Automation Publication 1732E-UM001A-EN-P - December 2019

Chapter 1 Module Information

•QuickConnect

QuickConnect enables the module to start communicating quickly in an

EtherNet/IP network through an accelerated startup process.

Module Overview The ArmorBlock I/O 16-channel configurable digital module has 16 universal

inputs/output. You can set individual channels as input only, output only, or

input and output through the data direction setting in the Add-on Profile

(AOP).

Figure 1 - ArmorBlock I/O 16-channel Configurable Digital Module

Before You Begin See the ArmorBlock I/O 16-channel Configurable Digital Module module

installation instructions, publication 1732E-IN008, for instructions on how to

install the modules.

MAC: XX-XX-XX-XX-XX-XX

M12 style A-coded

I/O connectors

Functional earth(1)

7/8”power connectors

M12 style A-coded

I/O connectors

(1) Functional Earth grounds the I/O block EtherNet/IP communication circuitry, which is designed to mitigate the effect of noise on the network. The device requires a solid

earth ground connection, either through a metal screw to a grounded metal panel or through a wire.

M12 style D-coded

EtherNet/IP connector

M12 style L-coded

power connectors

Rotary encoder switches

MAC: XX-XX-XX-XX-XX-XX

1732E-16CFGM12M12LDR 1732E-16CFGM12P5DR

M12 style A-coded

I/O connectors

M12 style D-coded

EtherNet/IP connector

M12 style D-coded

EtherNet/IP connector

Rockwell Automation Publication 1732E-UM001A-EN-P - December 2019 9

Chapter 2

Configure and Startup

Download and Register EDS

File

An electronic data sheet (EDS) file is required to configure the module in the

controller. You can download the EDS file for the module from the Product

Compatibility and Download Center (PCDC) website at

https://compatibility.rockwellautomation.com/Pages/home.aspx.

After you have downloaded the EDS file, you must register it using the EDS

hardware installation tool. To register the EDS file, do the following:

1. In Studio 5000 Logix Designer application, click Tools and select EDS

Hardware Installation Tool.

The Rockwell Automation’s EDS Wizard window appears.

Topic Page

Download and Register EDS File 9

Read the MAC Address 10

Set the Network Parameters 11

Configure the Module 12

Configuration Parameters 12

Configure in Logix Designer 15

Edit the Module Configuration Common Pages 16

10 Rockwell Automation Publication 1732E-UM001A-EN-P - December 2019

Chapter 2 Configure and Startup

2. Click Next.

3. Select “Register an EDS file(s)” and click Next.

4. Click Browse and select the EDS file that you have downloaded.

5. Click Next to begin the EDS file registration.

6. Verify that the EDS Wizard successfully completed the registration.

7. Click Finish.

Read the MAC Address Each module has a unique media access control address (MAC address) that is

assigned and cannot be changed. The MAC address is located on the front of the

module.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Allen-Bradley Steuereinheit Handbücher

Allen-Bradley

Allen-Bradley ArmorBlock 1732E-12X4M12QCDR Handbuch

Allen-Bradley

Allen-Bradley ControlNet 1786-RPFRL/B Bedienungsanleitung

Allen-Bradley

Allen-Bradley CAB6-HA 3 Bedienungsanleitung

Allen-Bradley

Allen-Bradley 1747-SN Bedienungsanleitung

Allen-Bradley

Allen-Bradley 1771-QRD Bedienungsanleitung

Allen-Bradley

Allen-Bradley ControlLogix DeviceNet C Series Bedienungsanleitung

Allen-Bradley

Allen-Bradley ControlNet 1747-ACN15 Bedienungsanleitung

Allen-Bradley

Allen-Bradley DeviceNet 1771-SDN/C Bedienungsanleitung

Allen-Bradley

Allen-Bradley 1772-MJ Bedienungsanleitung

Allen-Bradley

Allen-Bradley Entek XM-123 Bedienungsanleitung

Allen-Bradley

Allen-Bradley POINT I/O 1734-OB2 Bedienungsanleitung

Allen-Bradley

Allen-Bradley 1203-GD1 Stücklistenhandbuch

Allen-Bradley

Allen-Bradley ControlLogix 1756-DHRIO Bedienungsanleitung

Allen-Bradley

Allen-Bradley 1794-IE8 Series B Bedienungsanleitung

Allen-Bradley

Allen-Bradley ProcessLogix 1757 Series Bedienungsanleitung

Allen-Bradley

Allen-Bradley XM-124 Bedienungsanleitung

Allen-Bradley

Allen-Bradley ControlLogix 1756-DMD30 Bedienungsanleitung

Allen-Bradley

Allen-Bradley 1756-L7 Series Bedienungsanleitung

Allen-Bradley

Allen-Bradley 1492-CM1771-LD008F Bedienungsanleitung

Allen-Bradley

Allen-Bradley ArmorBlock 1732E Bedienungsanleitung

Allen-Bradley

Allen-Bradley CompactLogix EtherNet/IP 1768-EWEB Bedienungsanleitung

Allen-Bradley

Allen-Bradley DeviceNet 1203-GK5 Bedienungsanleitung

Allen-Bradley

Allen-Bradley ControlLogix DeviceNet 1756-DNB Merkblatt

Allen-Bradley

Allen-Bradley POINT I/O 1734-232ASC Bedienungsanleitung

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung