Allen-Bradley SensaGuard 440N-Z21S16A Bedienungsanleitung

SensaGuardTM

18 mm Plastic Barrel

Installation Instructions

Certifications

IMPORTANT:

SAVE THESE INSTRUCTIONS FOR FUTURE USE

Note: Refer to Technical Specifications for Certification information and ratings.

Table of Contents

Installation Instructions 3

Warnings 3

Technical Specification 3

Operating Characteristics 3

Outputs (internally fused) 3

Environmental 3

Protection 4

Dimensions 4

Mode of Operation 4

Status Indicators 4

Mounting Information 4

Nut Torque Specification 4

Minimum Distance Between Sensors 5

Misalignment Curve 5

Wiring Diagram 5

Recommended Mating Cable 5

Diagnostics 5

Troubleshooting 6

Application Wiring Examples 8

List of Recommended Relays 12

Maintenance 12

Repair 12

Declaration of Conformity 12

PA-75056-180-01(A), September 2006

2SensaGuardTM 18 mm Plastic Barrel Installation Instructions

Installation Instructions

Installation must be in accordance with the following steps and stated specifications and should be

carried out by suitable competent personnel. The unit is not to be used as a mechanical stop. Guard

stops and guides must be fitted. Adherence to the recommended maintenance instructions forms part

of the warranty.

This device is intended to be part of the safety related control system of a machine. Before installation,

a risk assessment should be performed to determine whether the specifications of this device are suit-

able for all foreseeable operational and environmental characteristics of the machine to which it is to

be fitted. Refer to Technical Specifications for Certification information and ratings.

ATTENTION: The presence of spare actuators compromise the integrity of the safety sys-

tems. Personal injury or death, property damage or economic loss can result.

Appropriate management controls, working procedures and alternative protec-

tive measures should be introduced to control their use and availability.

WARNING: Do not defeat, tamper, remove or bypass this unit. Severe injury to personnel

could result. The sensor MUST be connected to a Class 2 SELV 24V DC,

+10% / -15% power supply.

Technical Specification

Safety Ratings CAT4/SIL3

Safety Certifications TÜV, CE

Safety Standards IEC60947-5-3, IEC61508, EN954

Certifications cULus

Standards UL 508

PFHd 1.119 - 10-9

Operating Characteristics

Sensing Distance (Actuator) 18 mm 30 mm

Assured Make (mm) 15 25

Assured Break (mm) 25 35

Typical misalignment (±7 mm in both axes)

Maximum output current (all

outputs, mA) 200

Input Current 50 mA (no load supply current)

Operational Current, Min. ≤ 1 mA DC

Off-state Current < 0.5 mA DC

Maximum # of switches, connected in series Unlimited. See unit response time section

Operating Voltage 24V DC +10% / -15%

Class 2 SELV power supply

Frequency of operating cycle 1 Hz

Response Time (Off) 54 ms

Case Material Valox®DR 48

Actuator Material Valox®DR 48

Outputs (internally fused)

OSSD 2

Auxiliary 1

Environmental

Operating Temperature -10…+55°C (+14…+131°F)

Operating Humidity 5% -95% relative

Washdown rating NEMA 3, 4X, 12,13, IP 69K

Shock & Vibration IEC68-2-27 30 g, 11 ms/IEC 68-2-6

10…55Hz

Radio Frequency IEC 61000-4-3

IEC 61000-4-6

PA-75056-180-01(A), September 2006

SensaGuardTM 18 mm Plastic Barrel Installation Instructions 3

Protection

Short-Circuit Protection Incorporated

Current limitation Incorporated

Overload Protection Incorporated

False Pulse Protection Incorporated

Transient Noise Protection Incorporated

Reverse Polarity Protection Incorporated

Overvoltage protection Incorporated

Thermal shutdown/restart Incorporated

Electrical Life 10 x 106

Dimensions - mm (inches)

Mode of Operation

Status indicators:

• “Power/Fault” LED illuminates Green - The unit is ready for operation.

• “Power/Fault” LED illuminates Red: - Door/Guard open. The unit is not ready for operation.

• “Power/Fault” LED illuminates flashes Red or Green: - Unit failure. See Diagnostic section below.

Mounting Information

Use non-removable screws, bolts, or nuts to mount the switch and

actuator. Do not over torque the mounting hardware.

Position the switch and actuator so they are aligned with each other.

Mount the switch and actuator to removable guard, door or gate.

Keep the switch and actuator within the sensing range below.

Nut Torque Specification

Plastic Barrel Switch: 2.26 N•M (20 in•lbs)

Plastic Actuators: 2.26 N•M (20 in•lbs)

PA-75056-180-01(A), September 2006

4SensaGuardTM 18 mm Plastic Barrel Installation Instructions

30 mm Actuator

48.92

[1.926]

19.81

[0.78]

22.22

[0.875]

48.92

[1.926]

19.81

[0.78] 22.22

[0.875]

30.40

[1.197]

16.84

[0.663]

3.17

[0.125] 4.57

[0.18] DIA

2 PLACES

Sensor

18 mm Actuator

67.06

[2.640]

2.03

[.080]

M18X1

36.47

[1.436]

13.72

[0.54] 15.87

[0.625]

36.47

[1.436]

13.72

[0.54]

15.87

[0.625]

4.57

[0.180] DIA

19.81

[0.78]

3.17

[0.125]

15.42

[0.607]

2 PLACES

Minimum Distance Between Sensors

Misalignment Curve

18 mm Unit with 18 mm Target 18 mm Unit with 30 mm Target

Note: There must be a minimum spacing of 4 mm

(0.157 in) if actuator and sensor face approaches

laterally. This will prevent false triggering due to the

side lobe areas.

Wiring Diagram

Pin # Wire Color Signal

1 White Aux Outputs

2 Brown +24V

3 Green NA

4 Yellow OSSD 2, +24V Input

5 Grey OSSD 1

6 Pink OSSD 2

7 Blue 0V

8 Red OSSD 1, +24V Input

Recommended mating cable, 2 m (6.5 ft). 889D-F8AC-2. Lengths are available up to 30 m (98.4 ft)

Diagnostic

Unit Indicators (per IEC 60073)

State Status Troubleshooting

Off Not Powered NA

Device Output Red Not Safe, OSSD not active NA

LED Green Safe, OSSD active NA

Green flash Power up test or OSSD Check 24V DC or OSSD inputs

inputs not valid (yellow and red wire)

Red Flash 1 Hz Flash Recoverable Fault Recoverable fault —check OSSD

4 Hz Flash Non-recoverable Fault outputs are not shorted to GND,

24V DC or each other. Cycle power.

PA-75056-180-01(A), September 2006

SensaGuardTM 18 mm Plastic Barrel Installation Instructions 5

18 mm Actuator

75 mm

Sensor

1Senso

30 mm Actuator

100 mm

Sensor

1Senso

Lateral Misali

nment Tolerance—mm

(

)

Face to Face Distance—mm

-15

(-0.59) -10

(-0.39) -5

(-0.19) 05

(0.19) 10

(0.39) 15

(0.59)

-25

(-0.98) -20

(-0.787) 20

(0.787) 25

(0.98

)

Side Lobe Side Lobe

Assured Sensing

Distance

OFF OFF

-30

(-1.18)

-20

(-0.787)

-10

(-0.39)

010

(0.39)

(0.787)

(1.18)

Face to Face Distance—mm

Side Lobe Side Lobe

Assured Sensing

Distance

OFF OFF

Lateral Misalignment Tolerance—mm (in)

Note: There must be a minimum spacing of 7

mm (0.275 in) if actuator and sensor face

approaches laterally. This will prevent false

triggering due to the side lobe areas.

Brown

White

Blue

Pink

Grey

Green

Red

Yellow

Note: Refer to Technical Specifications for Certification information and ratings.

Troubleshooting

Series Circuit

PA-75056-180-01(A), September 2006

6SensaGuardTM 18 mm Plastic Barrel Installation Instructions

Ye l

Red

Brown

Gray

Pink

Blue

24VDC

Power

Supply

1606

-XL120D

Switch 1

+24

RTN

Switch 2

White

Ye l

Red

Brown

Gray

Pink

Blue

Actuator 1 Actuator 2

Switch 3

White

Ye l

Red

Brown

Gray

Pink

Blue

Actuator 3

Switch 4

White

Ye l

Red

Brown

Gray

Pink

Blue

Actuator 4

Switch 5

White

Ye l

Red

Brown

Gray

Pink

Blue

Actuator 5

+24 V

+0 V

Actuator 2 is in sensing range.

Switch

2 is functioning properly

OSSDs are energize to 24 V

Green LED is ON.

Actuator 3 is in sensing range.

Switch

3 has fault.

SeeTableAbove—Red LED is flashing

Actuator 1 is in sensing range.

Switch

1 is functioning properly

OSSDs are energize to 24 V

Green LED is ON.

Actuator 4 is in sensing range.

Switch

4 is functioning properly.

Series inputs are 0 V.

OSSDs are de-energized to 0V .

Green LED is Flashing to indicate

Series inputs are not 24V.

Actuator 5 is in sensing range.

Switch

5 is functioning properly.

Series inputs are 0V .

OSSDs are de-energized to 0V.

Green LED is Flashing to indicate

Series inputs are not 24V.

OSSD’s are OF

Recoverable fault

Note: Refer to Technical Specifications for Certification information and ratings.

Unit Response Time (does not include safety relay response time)

PA-75056-180-01(A), September 2006

SensaGuardTM 18 mm Plastic Barrel Installation Instructions 7

Yel

Red

White

Gray

Pink

Blue

24V DC

Power

Supply

1606

Sensor 1

+24

Sensor 2

Brown

Gray

Pink

White

Yel

Red

Blue

Sensor 3

Brown

Yel

Red

White

Gray

Pink

Blue

S21

S11 41332313S12S52

42342414A2S34S22

440R-N23126

Actuator 1

Actuator 2

Actuator 3

Initial Conditions:

All actuators are in sensing

distance.

Actuator 1 is moved out of

sensing range.

Sensor 2 drops the 24 volts

(red and yellow) from Sensor 1

OSSD outputs.

Green LED flashes.

Sensor 3 drops the 24 volts

(red and yellow) from Sensor 2

OSSD outputs.

Green LED flashes.

0 mS 54 mS 72 mS 90 mS

Actuator 1 is out of sensing

range.

Actuator 2 and 3 are in

sensing range.

Actuator 1 is moved into sensing

range.

Sensor 1 OSSD outputs are

energized.

Sensor 2 OSSD inputs (red and yellow)

transition to 24V DC from Sensor 1

OSSD outputs.

Sensor 2 OSSD outputs are energized

Sensor 3 OSSD inputs (red and

yellow) transition to 24V DC from

Sensor 2 OSSD outputs.

Sensor 3 OSSD outputs are

energized.

0 mS 360 mS 378 mS 396 mS

OFF

Note: Refer to Technical Specifications for Certification information and ratings.

Application Wiring Examples

PA-75056-180-01(A), September 2006

8SensaGuardTM 18 mm Plastic Barrel Installation Instructions

+24V DC

MSR127RP with 1 sensor, monitored manual reset, drivin

100S or 700S safet

controllers.

A1 S11 S52 S12 13 23 33 41

S21 S22 S34 A2 14 24 34 42

MSR127RP

Reset

GND

Blue

Gray

Pink

Yell o w

Red

Brown

SensaGuard

Unit 1

+24V DC

GND

MSR127RP with 3 sensors in series, monitored manual reset, drivin

100S or 700S safet

controllers

Blue

Gray

Pink

Yellow

Red

Brown

SensaGuard

Unit 1

SensaGuard

Unit 2

SensaGuard

Unit 3

A1 S11 S25 S12 13 23 33 41

S21 S22 S34 A2 14 24 34 42

MSR127RP

Reset

Blue

Gray

Pink

Yellow

Red

Brown

Blue

Gray

Pink

Yellow

Red

Brown

MSR127RP with 3 sensors and 1 440L light curtain in series, monitored manual reset, driving 100S or 700S safety relays.

Note: Light curtain must be last (farthest from MSR127).

GND

A1 S11 S52 S12 13 23 33 41

S21 S22 S34 A2 14 24 34 42

MSR127RP

Reset

K1 K2

+24V DC

Blue

Gray

Pink

Yel l o w

Red

Brown

SensaGuard

Unit 1

SensaGuard

Unit 2

SensaGuard

Unit 3 GuardShield

Blue

Gray

Pink

Yel l o w

Red

Brown

Blue

Gray

Pink

Yel l o w

Red

Brown

Blue

Gray

Pink

Yel l o w

Red

Brown

A1 S11 S52 S12 13 23 33 41

S21 S22 S34 A2 14 24 34 42

MSR127TP

GND

MSR127RP with 1 sensor, automatic reset, drivin

100S or 700S safet

controllers

+24V DC

SensaGuard

Unit 1

K1 K2

Blue

Gray

Pink

Yellow

Red

Brown

Note: Refer to Technical Specifications for Certification information and ratings.

Application Wiring Examples

PA-75056-180-01(A), September 2006

SensaGuardTM 18 mm Plastic Barrel Installation Instructions 9

MSR127TP with 3 sensors in series, automatic reset, drivin

100S or 700S rela

MSR127TP

+24V DC

GND

Blue

Gray

Pink

Yell o w

Red

Brown

SensaGuard

Unit 1

A1 S11 S52 S12 13 23 33 41

S21 S22 S34 A2 14 24 34 42

Blue

Gray

Pink

Yell o w

Red

Brown

Blue

Gray

Pink

Yell o w

Red

Brown

SensaGuard

Unit 3

SensaGuard

Unit 2

MSR127TP with 3 sensors and 1 440L light curtain in series, automatic reset, driving 100S or 700S safety contactors.

Note: Light curtain must be last (farthest from MSR127)

MSR127TP

GND

A1 S11 S52 S12 13 23 33 41

S21 S22 S34 A2 14 24 34 42

K1 K2

+24V DC

Blue

Gray

Pink

Yell o w

Red

Brown

Blue

Gray

Pink

Yell o w

Red

Brown

Blue

Gray

Pink

Yell o w

Red

Brown

Blue

Gray

Pink

Yell o w

Red

Brown

GuardShield

SensaGuard

Unit 1

SensaGuard

Unit 3

SensaGuard

Unit 2

Note: Refer to Technical Specifications for Certification information and ratings.

Application Wiring Examples

PA-75056-180-01(A), September 2006

10 SensaGuardTM 18 mm Plastic Barrel Installation Instructions

MSR200 series with 3 sensors and 1 440L light curtain, automatic reset, driving 100S or 700S safety contactors.

Note: Li

ht curtain can be attached to an

GuardShield

+24V DC

GND

440R-H23177

Y40 Y41S51S12 S20 S32 S11 S21 S31 S41 13 23 31 Y42 A1S32S20S12

S42 S50 S62 S34 Y1 Y2 Y3 14 24 32 Y32 Y33 Y30 A2S62S50S42

440R-H23179

S32S20S12

S62S50S42

S32

440R-H23180

MSR221P MSR211P MSR230P

K2 K3

SensaGuard

Blue

Brown

GrayPink

Blue

Brown

Yellow

Red

GrayPink

SensaGuard SensaGuard

GrayPink GrayPink

Blue

Brown

Yellow

Red

Blue

Brown

Yellow

Red

MSR200 series with 4 sensors and 1 440L light curtain, manual reset, driving 100S or 700S safety contactors.

Note: Li

ht curtain can be attached to an

ut.

Reset

GuardShield

+24V DC

GND

440R-H23177

Y40 Y41S51S12 S20 S32 S11 S21 S31 S41 13 23 31 Y42 A1S32S20S12

S42 S50 S62 S34 Y1 Y2 Y3 14 24 32 Y32 Y33 Y30 A2S62S50S42

440R-H23179

S32S20S12

S62S50S42

S32

440R-H23180

MSR221P MSR211P MSR230P

K2 K3

SensaGuard

Blue

Brown

GrayPink

Blue

Brown

Yellow

Red

GrayPink

SensaGuard SensaGuard

GrayPink GrayPink

Blue

Brown

Yellow

Red

Blue

Brown

Yellow

Red

Note: Refer to Technical Specifications for Certification information and ratings.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Allen-Bradley Schalten Handbücher

Allen-Bradley

Allen-Bradley 194L Bedienungsanleitung

Allen-Bradley

Allen-Bradley Guardmaster 440G-LZS21SJLJ Bedienungsanleitung

Allen-Bradley

Allen-Bradley 802T Bedienungsanleitung

Allen-Bradley

Allen-Bradley 105-PW23 Bedienungsanleitung

Allen-Bradley

Allen-Bradley TLS-GD2 Bedienungsanleitung

Allen-Bradley

Allen-Bradley 440P Bedienungsanleitung

Allen-Bradley

Allen-Bradley Stratix 8300 Bedienungsanleitung

Allen-Bradley

Allen-Bradley Guard Master 440N-Z2NRS1A Bedienungsanleitung

Allen-Bradley

Allen-Bradley Guardmaster 440J-N Bedienungsanleitung

Allen-Bradley

Allen-Bradley 194R Series Bedienungsanleitung

Allen-Bradley

Allen-Bradley TLSZR/L-GD Bedienungsanleitung

Allen-Bradley

Allen-Bradley Stratix 5800 Bedienungsanleitung

Allen-Bradley

Allen-Bradley 194E Bedienungsanleitung

Allen-Bradley

Allen-Bradley Guard master IMP Series Bedienungsanleitung

Allen-Bradley

Allen-Bradley Guardmaster Lifeline 4 Bedienungsanleitung

Allen-Bradley

Allen-Bradley Stratix 5700 Bedienungsanleitung

Allen-Bradley

Allen-Bradley Stratix 2000 Bedienungsanleitung

Allen-Bradley

Allen-Bradley 440G-LZ Bedienungs- und Wartungshandbuch

Allen-Bradley

Allen-Bradley Stratix 8000 Bedienungsanleitung

Allen-Bradley

Allen-Bradley 836T Gebrauchsanweisung

Allen-Bradley

Allen-Bradley 140M-SB Bedienungsanleitung

Allen-Bradley

Allen-Bradley GuardMaster Atlas 5-GD2 Bedienungsanleitung

Allen-Bradley

Allen-Bradley Stratix 5400 Bedienungsanleitung

Allen-Bradley

Allen-Bradley 198-MR7 Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung

Cabletron Systems

Cabletron Systems GIGAswitch GSR-16 Bedienungsanleitung

Cisco

Cisco Catalyst X4448 Handbuch