Allen + Roth LWSCT Bedienungsanleitung

Serial Number Purchase Date

ATTACH YOUR RECEIPT HERE

ITEM #1554611

MODEL #LWSCT

Français p. 15

COFFEE TABLE

REPLACEMENT PARTS LIST

For replacement parts, call our customer service department at 1-866-439-9800, 8 a.m. - 8 p.m., EST,

Monday - Sunday.

Printed in Vietnam

PART DESCRIPTION PART#

ATop Panel 00LWSCT-A

B Back Panel 00LWSCT-B

C Drawer Bottom Panel 00LWSCT-C

D Drawer Front 00LWSCT-D

E Drawer Back 00LWSCT-E

F Drawer Left Panel 00LWSCT-F

G Drawer Right Panel 00LWSCT-G

H Left Partition Panel 00LWSCT-H

I Right Partition Panel 00LWSCT-I

J Left Front Panel 00LWSCT-J

K Right Front Panel 00LWSCT-K

L Drawer Bottom Support 00LWSCT-L

M Left Side Panel 00LWSCT-M

N Right Side Panel 00LWSCT-N

O Center Back Stretcher 00LWSCT-O

P Center Front Stretcher 00LWSCT-P

Q Bottom Shelf 00LWSCT-Q

welcoming • sophisticated • inspiring

VR20047

Questions, problems, missing parts? Before returning to your retailer, call our customer service

department at 1-866-439-9800, 8 a.m. - 8 p.m., EST, Monday - Sunday.

allen + roth®is a registered trademark

Español p. 29

PART DESCRIPTION PART#

R Left Back Leg 00LWSCT-R

S Left Front Leg 00LWSCT-S

T Right Back Leg 00LWSCT-T

U Right Front Leg 00LWSCT-U

V Center Leg 00LWSCT-V

AA Cam Lock 00LWSCT-AA

BB Cam Bolt 00LWSCT-BB

CC M8 x 30 mm Wood Dowel 00LWSCT-CC

DD M6 x 30 mm Wood Dowel 00LWSCT-DD

EE Small Cam Lock 00LWSCT-EE

FF M3.5 x 15 mm Screw 00LWSCT-FF

GG M4 x 38 mm Screw 00LWSCT-GG

HH Touch-up Pen 00LWSCT-HH

II Metal Bracket 00LWSCT-II

JJ Handle Bolt 00LWSCT-JJ

KK Handle 00LWSCT-KK

LL Glue 00LWSCT-LL

JJ KK

TABLE OF CONTENTS

Wood Dowel Installation...................................................................................................... 2

Package Contents............................................................................................................... 3

Hardware Contents..............................................................................................................4

Safety Information............................................................................................................... 5

Preparation ......................................................................................................................... 5

Assembly Instructions.......................................................................................................... 6

Care and Maintenance ......................................................................................................13

One-Year Warranty ........................................................................................................... 13

Replacement Parts List ..................................................................................................... 14

WOOD DOWEL INSTALLATION

1. Apply glue to each dowel prior to inserting the dowel into the hole. Excess glue can be wiped o󰀨

with damp cloth.

2. Insert dowel at least half way by tapping lightly with a rubber mallet if necessary.

NOTE: IT IS VERY IMPORTANT TO USE GLUE WITH DOWELS.

PACKAGE CONTENTS

PART DESCRIPTION QUANTITY

ATop Panel 1

B Back Panel 1

C Drawer Bottom Panel 1

D Drawer Front 1

E Drawer Back 1

F Drawer Left Panel 1

G Drawer Right Panel 1

H Left Partition Panel 1

I Right Partition Panel 1

J Left Front Panel 1

K Right Front Panel 1

PART DESCRIPTION QUANTITY

L Drawer Bottom Support 1

M Left Side Panel 1

N Right Side Panel 1

O Center Back Stretcher 1

P Center Front Stretcher 1

Q Bottom Shelf 1

R Left Back Leg 1

S Left Front Leg 1

T Right Back Leg 1

U Right Front Leg 1

V Center Leg 1

CAM LOCK SYSTEM OPERATION

1. Screw the Cam Bolt into the threaded inserts on the panel. Connect both panels together; making

sure Cam Bolt goes into the pre-drilled hole on the end of panel for Cam Lock.

2. Insert the Cam Lock into the pre-drilled large hole on the panel. Make sure the arrow on the face

of Cam Lock faces out and points towards Cam Bolt.

3. Take a Phillips screwdriver and rotate the Cam Lock clockwise to lock the Cam Bolt in place.

HARDWARE CONTENTS (shown actual size)

Cam Lock

Qty. 43

M3.5 x 15 mm Screw

Qty. 16

Cam Bolt

Qty. 48

Touch-up Pen

Qty. 1

Glue

Qty. 1

SAFETY INFORMATION

Please read and understand this entire manual before attempting to assemble, operate or install

the product.

• Do not allow children to climb or play in or around this product.

• Use this unit for its intended purpose only. Do not use shelves as step ladder.

• To avoid damage, assemble the product on a sturdy, level and protective surface.

• Two people should work together to assemble the unit.

• Make sure all bolts/screws are tightly fastened before the unit is used.

• Check bolts/screws periodically and tighten them if necessary.

• Do not push furniture, especially on carpeted oor. Have someone help you lift the item and

place it in its new location. Remove any shelves before moving.

WARNING

This unit is intended only for use within the maximum weights indicated. Use with load heavier than the

maximum weights indicated may result in instability, causing possible injury.

PREPARATION

Before beginning assembly of product, make sure all parts are present. Compare parts with package

contents list and hardware contents list. If any part is missing or damaged, do not attempt to

assemble the product.

Estimated Assembly Time: 60 minutes

Tools Required for Assembly (not included): Phillips screwdriver and rubber mallet.

Maximum load 6.9 kg / 15 lb

M8 x 30 mm

Wood Dowel

Qty. 34

M6 x 30 mm

Wood Dowel

Qty. 1

Small Cam Lock

Qty. 5

JJ KK LL

M4 x 38 mm Screw

Qty. 18

Handle

Qty. 1

Handle Bolt

Qty. 2

Metal Bracket

Qty. 8

Maximum load 90.8 kg / 200 lb

Maximum load 22.7 kg / 50 lb

Extra hardware

1a. Unpack the unit and conrm that you have all the hardware and

required parts. Assemble the unit on a carpeted oor or the empty

carton to avoid any scratch.

1b. Securely screw ve cam bolts (BB) into the designated threaded

inserts on the drawer front panel (D). Fully tighten with a phillips

screwdriver. DO NOT over tighten the cam bolts.

ASSEMBLY INSTRUCTIONS

Hardware Used

Cam Bolt x 5

Handle Bolt x 2

4. Attach the drawer bottom support (L) to the drawer front (D) with

one wood dowel (DD) and one small cam lock (EE).

NOTE: It is very important to use a small amount of glue on both

ends of dowels.

Hardware Used

3. Slide the drawer bottom panel (C) into the grooves between the

drawer side panels (F and G) until fully rest into the groove of

drawer front (D).

Small Cam Lock x 4

2. Attach drawer side panels (F and G) to the drawer front panel (D) by

engaging four small cam locks (EE).

Hardware Used

ASSEMBLY INSTRUCTIONS

6. Attach the handle (KK) to the front of the drawer front panel (D)

with two handle bolts (JJ).

5. Fasten the drawer back panel (E) to the drawer side panels (F and G)

and drawer bottom support (L) with six 38 mm screws (GG).

Hardware Used

Wood Dowel x 1

Small Cam Lock x 1

Glue x 1

M4 x 38 mm Screw x 6

Grooves line up with each

other and face inward

DEE

Handle x 1

7. Securely screw cam bolts (BB) into the designated threaded inserts

on the top panel (A), back panel (B), front panels (J and K) and side

panels (M and N). Fully tighten with a phillips screwdriver. DO NOT

over tighten the cam bolts.

ASSEMBLY INSTRUCTIONS

Hardware Used

10. Attach the right side panel (N) between the right legs (T and U) by

engaging four cam locks (AA) and two wood dowels (CC).

Hardware Used

9. Attach the left side panel (M) between the left side legs (R and S) by

engaging four cam locks (AA) and two wood dowels (CC).

Hardware Used

8. Securely screw cam bolts (BB) into the designated threaded inserts

on the legs (R, S, T and U). Fully tighten with a phillips screwdriver.

DO NOT over tighten the cam bolts.

Hardware Used

ASSEMBLY INSTRUCTIONS

11. Attach the partition panels (H and I) to the back panel (B) by

engaging four cam locks (AA) and two wood dowels (CC).

Hardware Used

Cam Bolt x 25

Wood Dowel x 2

Cam Lock x 4

U T

Glue x 1

Wood Dowel x 2

Cam Lock x 4

Glue x 1

Wood Dowel x 2

Cam Lock x 4

Glue x 1

Wood Dowel x 2

Cam Lock x 4

Glue x 1

12. Attach the front panels (J and K) to the partition panels (H

and I) with four cam locks (AA) and two wood dowels (CC).

Cam Bolt x 18

Slides face inward

15. Align and attach the previous assembly to the right leg

assembly (T, U and N) with six cam locks (AA) and four

wood dowels (CC).

ASSEMBLY INSTRUCTIONS ASSEMBLY INSTRUCTIONS

18. Using the pilot holes as a guide, fasten the bottom shelf (Q) to

the legs (R, S, T and U) by attaching two metal brackets (II) at

each joint, using two 15 mm screws (FF) per metal bracket.

14. Fasten the center back stretcher (O) to the partition panels (H

and I) with four 38 mm screws (GG).

1110

13. Fasten the center front stretcher (P) to the partition panels (H

and I) and the front panels (J and K) with two wood dowels

(CC) and eight 38 mm screws (GG).

17. Align and attach left leg assembly (S, R and M) to the

previous assembly with six cam locks (AA) and six wood

dowels (CC).

16. Attach the bottom shelf (Q) to the right side legs (T and U)

with two wood dowels (CC). 16

Hardware Used

Wood Dowel x 2

Glue x 1

Hardware Used

Wood Dowel x 6

Cam Lock x 6

Glue x 1

Hardware Used

M3.5 x 15 mm Screw

Metal Bracket

x 16

x 8

II FF

Hardware Used

Wood Dowel x 2

Glue x 1

Hardware Used

Wood Dowel x 4

Cam Lock x 6

Glue x 1

M4 x 38 mm Screw x 8

M4 x 38 mm Screw x 4

Cam lock holes face the back panel

The pilot holes will face the oor

when the unit is turned upright

ASSEMBLY INSTRUCTIONS

21. Insert the assembled drawer into the frame. Extend the ball

bearing slide tracks on the panels (H and I) all the way forward

(including ball bearing cart). Then align the slide runners on

the drawer with the slide tracks and push the drawer carefully

inside until it stops.

Ball bearing cart

FORNT FORNT

1312

20. Securely screw the center leg (V) to the bottom shelf (Q).

19. Place the top panel (A) upside down on a level and protected

surface. Ask for assistance to attach the previous assembly

to the top panel (A) with fteen cam locks (AA) and twelve

wood dowels (CC).

CARE AND MAINTENANCE

CARING FOR WOOD FURNITURE

A touch-up pen has been provided to minimize the small nicks or scratches that may occur during assembly or shipping.

• Use a soft, clean cloth that will not scratch the surface when dusting.

• Use of furniture polishes is not necessary. Should you choose to use polishes, test rst in an inconspicuous area.

• Using solvents of any kind on your furniture may damage the nish.

• Never use water to clean your furniture as it may cause damage to the nish.

• Always use coasters under beverage glasses and owerpots.

• Liquid spills should be removed immediately. Using a soft clean cloth, blot the spill gently. Avoid rubbing.

• Always use protective pads under hot dishes and plates. Heat can cause chemical changes that may create spotting

within the furniture nish.

• In the event that your furniture is stained or otherwise damaged during use, we recommend that you call a professional

to repair your furniture.

• Check bolts/screws periodically and tighten them if necessary.

• It is best to keep your furniture in a climate-controlled environment. Extreme temperature and humidity changes can cause

fading, warping, shrinking and splitting of wood. It is advised to keep furniture away from direct sunlight as sun may damage

the nish.

• Proper care and cleaning at home will extend the life of your purchase. Following these important and helpful tips will enhance

your furniture as it ages.

This product is warranted to the original purchaser. If there is a failure in this unit due to defects in materials or workmanship,

the manufacturer will repair or replace this item at our discretion without charge. Warranty is void if product has been assembled

incorrectly, misused, abused by overloading, altered in any way or damaged due to accident. This warranty is not transferable

and does not cover chipping, aking, scratches, rust, dents, or other damages to the surfaces of this product. Responsibility

of the manufacturer is limited to repair or replacement of this product. The manufacturer is not responsible for consequential,

incidental, or other damages or losses resulting from product failure.

This warranty is in lieu of all other expressed warranties. Some states do not allow the exclusion or limitation of incidental or

consequential damages, so the above limitation may not apply to you. This warranty gives you specic legal rights and you may

have other rights which vary from state to state.

ONE-YEAR LIMITED WARRANTY

DOWN

Hardware Used

Wood Dowel x 12

Cam Lock x 15

Glue x 1

Numéro de série Date d’achat

JOINDRE VOTRE REÇU ICI

ARTICLE #1554611

MODÈLE #LWSCT

TABLE BASSE

LISTE DES PIÉCES DE RECHANGE

Pour obtenir des pièces de rechange, communiquez avec notre service à la clientèle au 1-866-439-9800,

entre 8 h et 20 h (HNE), du lundi au dimanche.

Imprimé au Vietnam

accueillant • sophistiqué • inspirant

VR20047

Des questions, des problèmes, des pièces manquantes? Avant de retourner chez votre détaillant, ap-

pelez notre service à la clientèle au 1-866-439-9800, de 8 h à 20 h, HNE, du lundi au dimanche.

allen + roth ® est une marque déposée de

PIÈCE DESCRIPTION NoDE PIÈCE

A Panel supérieur 00LWSCT-A

B Panel arrière 00LWSCT-B

C Panel inférieur du tiroir 00LWSCT-C

D Façade du tiroir 00LWSCT-D

E Arrière du tiroir 00LWSCT-E

F Panel de tiroir gauche 00LWSCT-F

G Panel de tiroir droit 00LWSCT-G

H Panel de partition gauche 00LWSCT-H

I Panel de partition droite 00LWSCT-I

J Tendeur avant gauche 00LWSCT-J

K Tendeur avant droit 00LWSCT-K

L Support inférieur du tiroir 00LWSCT-L

M Panel de côté gauche 00LWSCT-M

N Panel de côté droit 00LWSCT-N

O Tendeur arrière central 00LWSCT-O

P Tendeur avant central 00LWSCT-P

Q Étagère inférieure 00LWSCT-Q

PIÈCE DESCRIPTION NoDE PIÈCE

R Pied arrière gauche 00LWSCT-R

S Pied avant gauche 00LWSCT-S

T Pied arrière droit 00LWSCT-T

U Pied avant droit 00LWSCT-U

V Pied central 00LWSCT-V

AA Verrou à came 00LWSCT-AA

BB Boulon à came 00LWSCT-BB

CC Cheville de bois M8 x 30 mm 00LWSCT-CC

DD Cheville de bois M6 x 30 mm 00LWSCT-DD

EE Petit verrou à came 00LWSCT-EE

FF Vis M3,5 x 15 mm 00LWSCT-FF

GG Vis M4 x 38 mm 00LWSCT-GG

HH Crayon à retouche 00LWSCT-HH

II Support métallique 00LWSCT-II

JJ Boulon de poignée 00LWSCT-JJ

KK Poignée 00LWSCT-KK

LL Colle 00LWSCT-LL

JJ KK

1716

TABLE DES MATIERES

Installation de cheville en boi...............................................................................................16

Contenu du colis..................................................................................................................17

Contenu du matériel............................................................................................................18

Informations de sécurité......................................................................................................19

Préparation..........................................................................................................................19

Instructions du montage...................................................................................................... 20

Entretien et maintenance ................................................................................................... 27

Garantie d’un an.................................................................................................................. 27

Pièces de rechange list....................................................................................................... 28

INSTALLATION DE CHEVILLE EN BOIS

1. Appliquez de la colle sur chaque cheville avant de les insérer dans le trou. L’excès de colle peut être

nettoyé avec un chi󰀨on humide.

2. Insérez la cheville au moins à mi-chemin en tapotant légèrement grâce à un maillet en caoutchouc si

nécessaire. NOTE: IL EST IMPORTANT D’UTILISER DE LA COLLE AVEC LES CHEVILLES.

CONTENU DU COLIS

PIÈCE DESCRIPTION QUANTITE

A Panel supérieur 1

B Panel arrière 1

C Panel inférieur du tiroir 1

D Façade du tiroir 1

E Arrière du tiroir 1

F Panel de tiroir gauche 1

G Panel de tiroir droit 1

H Panel de partition gauche 1

I Panel de partition droite 1

J Tendeur avant gauche 1

K Tendeur avant droit 1

PIÈCE DESCRIPTION QUANTITE

L Support inférieur du tiroir 1

M Panel de côté gauche 1

N Panel de côté droit 1

O Tendeur arrière central 1

P Tendeur avant central 1

Q Étagère inférieure 1

R Pied arrière gauche 1

S Pied avant gauche 1

T Pied arrière droit 1

U Pied avant droit 1

V Pied central 1

LE FONCTIONNEMENT DU SYSTEME DE VERROU A CAME

1. Visser le boulon à came dans les inserts letés du panneau. Connecter les deux panneaux en-

semble ; en s’assurant que le boulon à came entre dans le trou pré-percé à l’extrémité du pan-

neau pour le verrou à came.

2. Insérer le verrou à came dans le large trou pré-percé au panneau. Assurez-vous que la èche sur

la face du verrou à came est tournée vers l’extérieur et se pointe vers le boulon à came.

3. Prenez un tournevis cruciforme et tournez le verrou à came dans le sens des aiguilles d’une mon-

tre pour verrouiller le boulon à came sur place.

COLLE

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Allen + Roth Inneneinrichtung Handbücher

Allen + Roth

Allen + Roth 1960VA-60-267-900-UM Bedienungsanleitung

Allen + Roth

Allen + Roth WSVSWB Bedienungsanleitung

Allen + Roth

Allen + Roth WSWS-WU1C Bedienungsanleitung

Allen + Roth

Allen + Roth Roveland 2026VA-48-242-926 Bedienungsanleitung

Allen + Roth

Allen + Roth LG-2156-3150 Bedienungsanleitung

Allen + Roth

Allen + Roth LWSH60VW Bedienungsanleitung

Allen + Roth

Allen + Roth HAVERHILL TJ-0113V4822BR Bedienungsanleitung

Allen + Roth

Allen + Roth 1694VA-60-241-901-UM Bedienungsanleitung

Allen + Roth

Allen + Roth FTS81220 Bedienungsanleitung

Allen + Roth

Allen + Roth 1694VA-48-241-900-UM Bedienungsanleitung

Allen + Roth

Allen + Roth 1652VA-18-200 Bedienungsanleitung

Allen + Roth

Allen + Roth L-DN1779SAL-A-RC Bedienungsanleitung

Allen + Roth

Allen + Roth 1412VA-60-201-925 Bedienungsanleitung

Allen + Roth

Allen + Roth WINDSOR 42MB Bedienungsanleitung

Allen + Roth

Allen + Roth LARSEN 1694VA-36-241-900-UM Bedienungsanleitung

Allen + Roth

Allen + Roth L-DN2397SAL-T Bedienungsanleitung

Allen + Roth

Allen + Roth LW158B04 Bedienungsanleitung

Allen + Roth

Allen + Roth 2026VA-60-201-900-SR Bedienungsanleitung

Allen + Roth

Allen + Roth 1483VA-36-201 Bedienungsanleitung

Allen + Roth

Allen + Roth LWSPSS Bedienungsanleitung

Allen + Roth

Allen + Roth 782.001.001 Bedienungsanleitung

Allen + Roth

Allen + Roth BSDC6 Bedienungsanleitung

Allen + Roth

Allen + Roth SERENA PARK LOVESEAT FRS90466 Bedienungsanleitung

Allen + Roth

Allen + Roth 0339211 Bedienungsanleitung

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung