Allen + Roth LWSET Bedienungsanleitung

Serial Number Purchase Date

ATTACH YOUR RECEIPT HERE

ITEM #1554610

MODEL #LWSET

SIDE TABLE

REPLACEMENT PARTS LIST

For replacement parts, call our customer service department at 1-866-439-9800, 8 a.m. - 8 p.m., EST,

Monday - Sunday.

Printed in Vietnam

PART DESCRIPTION PART#

ATop Panel 00LWSET-A

B Back Panel 00LWSET-B

C Drawer Bottom Panel 00LWSET-C

D Drawer Front 00LWSET-D

E Drawer Back 00LWSET-E

F Drawer Left Panel 00LWSET-F

G Drawer Right Panel 00LWSET-G

H Left Side Panel 00LWSET-H

I Right Side Panel 00LWSET-I

J Center Back Stretcher 00LWSET-J

K Center Front Stretcher 00LWSET-K

L Bottom Shelf 00LWSET-L

M Left Back Leg 00LWSET-M

N Left Front Leg 00LWSET-N

welcoming • sophisticated • inspiring

allen + roth®is a registered trademark

Questions, problems, missing parts? Before returning to your retailer, call our customer service

department at 1-866-439-9800, 8 a.m. - 8 p.m., EST, Monday - Sunday.

VR20046

JFrançais p. 15

Español p. 29

PART DESCRIPTION PART#

O Right Back Leg 00LWSET-O

P Right Front Leg 00LWSET-P

AA Cam Lock 00LWSET-AA

BB Cam Bolt 00LWSET-BB

CC M8 x 30 mm Wood Dowel 00LWSET-CC

DD Glue 00LWSET-DD

EE Small Cam Lock 00LWSET-EE

FF M3.5 x 15 mm Screw 00LWSET-FF

GG M4 x 38 mm Screw 00LWSET-GG

HH Touch-up Pen 00LWSET-HH

II Metal Bracket 00LWSET-II

JJ Handle Bolt 00LWSET-JJ

KK Handle 00LWSET-KK

JJ KK

TABLE OF CONTENTS

Wood Dowel Installation...................................................................................................... 2

Package Contents............................................................................................................... 3

Hardware Contents..............................................................................................................4

Safety Information............................................................................................................... 5

Preparation ......................................................................................................................... 5

Assembly Instructions.......................................................................................................... 6

Care and Maintenance ......................................................................................................12

One-Year Warranty ........................................................................................................... 12

Replacement Parts List ..................................................................................................... 14

WOOD DOWEL INSTALLATION

1. Apply glue to each dowel prior to inserting the dowel into the hole. Excess glue can be wiped o󰀨

with damp cloth.

2. Insert dowel at least half way by tapping lightly with a rubber mallet if necessary.

NOTE: IT IS VERY IMPORTANT TO USE GLUE WITH DOWELS.

PACKAGE CONTENTS

PART DESCRIPTION QUANTITY

ATop Panel 1

B Back Panel 1

C Drawer Bottom Panel 1

D Drawer Front 1

E Drawer Back 1

F Drawer Left Panel 1

G Drawer Right Panel 1

H Left Side Panel 1

PART DESCRIPTION QUANTITY

I Right Side Panel 1

J Center Back Stretcher 1

K Center Front Stretcher 1

L Bottom Shelf 1

M Left Back Leg 1

N Left Front Leg 1

O Right Back Leg 1

P Right Front Leg 1

CAM LOCK SYSTEM OPERATION

1. Screw the Cam Bolt into the threaded inserts on the panel. Connect both panels together; making

sure Cam Bolt goes into the pre-drilled hole on the end of panel for Cam Lock.

2. Insert the Cam Lock into the pre-drilled large hole on the panel. Make sure the arrow on the face

of Cam Lock faces out and points towards Cam Bolt.

3. Take a Phillips screwdriver and rotate the Cam Lock clockwise to lock the Cam Bolt in place.

HARDWARE CONTENTS (shown actual size)

Cam Lock

Qty. 22

M3.5 x 15 mm Screw

Qty. 16

Cam Bolt

Qty. 26

Touch-up Pen

Qty. 1

SAFETY INFORMATION

Please read and understand this entire manual before attempting to assemble, operate or install

the product.

• Do not allow children to climb or play in or around this product.

• Use this unit for its intended purpose only. Do not use shelves as step ladder.

• To avoid damage, assemble the product on a sturdy, level and protective surface.

• Two people should work together to assemble the unit.

• Make sure all bolts/screws are tightly fastened before the unit is used.

• Check bolts/screws periodically and tighten them if necessary.

• Do not push furniture, especially on carpeted oor. Have someone help you lift the item and

place it in its new location. Remove any shelves before moving.

WARNING

This unit is intended only for use within the maximum weights indicated. Use with load heavier than the

maximum weights indicated may result in instability, causing possible injury.

PREPARATION

Before beginning assembly of product, make sure all parts are present. Compare parts with package

contents list and hardware contents list. If any part is missing or damaged, do not attempt to

assemble the product.

Estimated Assembly Time: 60 minutes

Tools Required for Assembly (not included): Phillips screwdriver and rubber mallet.

Maximum load 13.7 kg / 30 lb

M8 x 30 mm Wood Dowel

Qty. 20

Glue

Qty. 1

Small Cam Lock

Qty. 4

JJ KK

M4 x 38 mm Screw

Qty. 4

HH II

Handle

Qty. 1

Handle Bolt

Qty. 2

Metal Bracket

Qty. 8

Maximum load 22.7 kg / 50 lb

Extra hardware

1a. Unpack the unit and conrm that you have all the hardware and

required parts. Assemble the unit on a carpeted oor or the empty

carton to avoid any scratch.

1b. Securely screw four cam bolts (BB) into the designated threaded

inserts on the drawer front panel (D). Fully tighten with a phillips

screwdriver. DO NOT over tighten the cam bolts.

ASSEMBLY INSTRUCTIONS

Hardware Used

Cam Bolt x 4

Hardware Used

3. Slide the drawer bottom panel (C) into the grooves between the

drawer side panels (F and G) until fully rest into the groove of

drawer front (D).

Small Cam Lock x 4

2. Attach drawer side panels (F and G) to the drawer front panel (D) by

engaging four small cam locks (EE).

Hardware Used

ASSEMBLY INSTRUCTIONS

5. Attach the handle (KK) to the front of the drawer front panel (D)

with two handle bolts (JJ). 5

4. Fasten the drawer back panel (E) to the drawer side panels (F and G)

with four 38 mm screws (GG).

Hardware Used

DEE

M4 x 38 mm Screw x 4

Handle Bolt x 2

Handle x 1

ABB

6. Securely screw cam bolts (BB) into the designated threaded inserts

on the top panel (A) and side panels (H and I). Fully tighten with a

phillips screwdriver. DO NOT over tighten the cam bolts.

Cam Bolt x 8

Grooves line up with each

other and face inward

ASSEMBLY INSTRUCTIONS

Hardware Used

8. Attach the left side panel (H) between the left side legs (M and N) by

engaging four cam locks (AA) and two wood dowels (CC).

Hardware Used

7. Securely screw cam bolts (BB) into the designated threaded inserts

on the legs (M, N, O and P). Fully tighten with a phillips screwdriver.

ASSEMBLY INSTRUCTIONS

11a. Attach the center back stretcher (J) to the right side panel

(I) with one cam lock (AA) and one wood dowel (CC).

11b. Attach the center front stretcher (K) to the right front leg (P)

and right side panel (I) with one cam lock (AA) and one wood

dowel (CC).

10. Attach the back panel (B) to the right back leg (O) by engaging two cam

locks (AA) and one wood dowel (CC).

Hardware Used

Cam Bolt x 14

Wood Dowel x 2

Cam Lock x 4

Glue x 1

Wood Dowel x 1

Cam Lock x 2

Glue x 1

Wood Dowel x 2

Cam Lock x 2

Glue x 1

Wood Dowel x 2

Glue x 1

Hardware Used

Wood Dowel x 2

Cam Lock x 4

Glue x 1

9. Attach the right side panel (I) between the right legs (O and P) by

engaging four cam locks (AA) and two wood dowels (CC).

12. Attach the bottom shelf (L) to the right side legs (O and P)

with two wood dowels (CC).

The cam lock holes

are located upward

and face inward

The cam locks will face

the oor when the unit

is turned upright

The pilot holes will face

the oor when the unit

is turned upright

ASSEMBLY INSTRUCTIONS ASSEMBLY INSTRUCTIONS

1110

16. Insert the assembled drawer into the frame. Extend the ball

bearing slide tracks on the panels (H and I) all the way forward

(including ball bearing cart). Then align the slide runners on

the drawer with the slide tracks and push the drawer carefully

inside until it stops.

13. Align and attach left leg assembly (H, M and N) to the

previous assembly with four cam locks (AA) and ve wood

dowels (CC).

Hardware Used

Ball bearing cart

FORNT FORNT

DOWN

Wood Dowel x 5

Cam Lock x 4

Glue x 1

Hardware Used

M3.5 x 15 mm Screw

Metal Bracket

x 16

x 8

Wood Dowel x 6

Cam Lock x 6

Glue x 1

14. Using the pilot holes as a guide, fasten the bottom shelf (L) to

the legs (M, N, O and P) by attaching two metal brackets (II) at

each joint, using two 15 mm screws (FF) per metal bracket.

15. Place the top panel (A) upside down on a level and protected

surface. Ask for assistance to attach the previous assembly

to the top panel (A) with six cam locks (AA) and six wood

dowels (CC).

II O

CARE AND MAINTENANCE

CARING FOR WOOD FURNITURE

A touch-up pen has been provided to minimize the small nicks or scratches that may occur during assembly or shipping.

• Use a soft, clean cloth that will not scratch the surface when dusting.

• Use of furniture polishes is not necessary. Should you choose to use polishes, test rst in an inconspicuous area.

• Using solvents of any kind on your furniture may damage the nish.

• Never use water to clean your furniture as it may cause damage to the nish.

• Always use coasters under beverage glasses and owerpots.

• Liquid spills should be removed immediately. Using a soft clean cloth, blot the spill gently. Avoid rubbing.

• Always use protective pads under hot dishes and plates. Heat can cause chemical changes that may create spotting

within the furniture nish.

• In the event that your furniture is stained or otherwise damaged during use, we recommend that you call a professional

to repair your furniture.

• Check bolts/screws periodically and tighten them if necessary.

• It is best to keep your furniture in a climate-controlled environment. Extreme temperature and humidity changes can cause

fading, warping, shrinking and splitting of wood. It is advised to keep furniture away from direct sunlight as sun may damage

the nish.

• Proper care and cleaning at home will extend the life of your purchase. Following these important and helpful tips will enhance

your furniture as it ages.

This product is warranted to the original purchaser. If there is a failure in this unit due to defects in materials or workmanship,

the manufacturer will repair or replace this item at our discretion without charge. Warranty is void if product has been assembled

incorrectly, misused, abused by overloading, altered in any way or damaged due to accident. This warranty is not transferable

and does not cover chipping, aking, scratches, rust, dents, or other damages to the surfaces of this product. Responsibility

of the manufacturer is limited to repair or replacement of this product. The manufacturer is not responsible for consequential,

incidental, or other damages or losses resulting from product failure.

This warranty is in lieu of all other expressed warranties. Some states do not allow the exclusion or limitation of incidental or

consequential damages, so the above limitation may not apply to you. This warranty gives you specic legal rights and you may

have other rights which vary from state to state.

ONE-YEAR LIMITED WARRANTY

1312

JOINDRE VOTRE REÇU ICI

ARTICLE #1554610

MODÈLE #LWSET

TABLE DE CÔTÉ

LISTE DES PIÉCES DE RECHANGE

Pour obtenir des pièces de rechange, communiquez avec notre service à la clientèle au 1-866-439-9800,

entre 8 h et 20 h (HNE), du lundi au dimanche.

Imprimé au Vietnam

PIÈCE DESCRIPTION NoDE PIÈCE

A Panel supérieur 00LWSET-A

B Panel arrière 00LWSET-B

C Panel inférieur du tiroir 00LWSET-C

D Façade du tiroir 00LWSET-D

E Arrière du tiroir 00LWSET-E

F Panel de tiroir gauche 00LWSET-F

G Panel de tiroir droit 00LWSET-G

H Panel de côté gauche 00LWSET-H

I Panel de côté droit 00LWSET-I

J Tendeur arrière central 00LWSET-J

K Tendeur avant central 00LWSET-K

L Étagère inférieure 00LWSET-L

M Pied arrière gauche 00LWSET-M

N Pied avant gauche 00LWSET-N

accueillant • sophistiqué • inspirant

allen + roth ® est une marque dépo-

Des questions, des problèmes, des pièces manquantes ? Avant de retourner chez votre détaillant,

appelez notre service à la clientèle au 1-866-439-9800, de 8 h à 20 h, HNE, du lundi au dimanche.

VR20046

Numéro de série Date d’achat

PIÈCE DESCRIPTION NoDE PIÈCE

O Pied arrière droit 00LWSET-O

P Pied avant droit 00LWSET-P

AA Verrou à came 00LWSET-AA

BB Boulon à came 00LWSET-BB

CC Cheville de bois M8 x 30 mm 00LWSET-CC

DD Colle 00LWSET-DD

EE Petit verrou à came 00LWSET-EE

FF Vis M3,5 x 15 mm 00LWSET-FF

GG Vis M4 x 38 mm 00LWSET-GG

HH Crayon à retouche 00LWSET-HH

II Support métallique 00LWSET-II

JJ Boulon de poignée 00LWSET-JJ

KK Poignée 00LWSET-KK

JJ KK

1716

TABLE DES MATIERES

Installation de cheville en boi..............................................................................................16

Contenu du colis.................................................................................................................17

Contenu du matériel...........................................................................................................18

Informations de sécurité.....................................................................................................19

Préparation.........................................................................................................................19

Instructions du montage......................................................................................................20

Entretien et maintenance.....................................................................................................26

Garantie d’un an................................................................................................................ 26

Pièces de rechange list .....................................................................................................28

INSTALLATION DE CHEVILLE EN BOIS

CONTENU DU COLIS

PIÈCE DESCRIPTION QUANTITE

A Panel supérieur 1

B Panel arrière 1

C Panel inférieur du tiroir 1

D Façade du tiroir 1

E Arrière du tiroir 1

F Panel de tiroir gauche 1

G Panel de tiroir droit 1

H Panel de côté gauche 1

PIÈCE DESCRIPTION QUANTITE

I Panel de côté droit 1

J Tendeur arrière central 1

K Tendeur avant central 1

L Étagère inférieure 1

M Pied arrière gauche 1

N Pied avant gauche 1

O Pied arrière droit 1

P Pied avant droit 1

1. Appliquez de la colle sur chaque cheville avant de les insérer dans le trou. L’excès de colle peut être

nettoyé avec un chi󰀨on humide.

2. Insérez la cheville au moins à mi-chemin en tapotant légèrement grâce à un maillet en caoutchouc si

nécessaire. NOTE: IL EST IMPORTANT D’UTILISER DE LA COLLE AVEC LES CHEVILLES.

LE FONCTIONNEMENT DU SYSTEME DE VERROU A CAME

1. Visser le boulon à came dans les inserts letés du panneau. Connecter les deux panneaux en-

semble ; en s’assurant que le boulon à came entre dans le trou pré-percé à l’extrémité du pan-

neau pour le verrou à came.

2. Insérer le verrou à came dans le large trou pré-percé au panneau. Assurez-vous que la èche sur

la face du verrou à came est tournée vers l’extérieur et se pointe vers le boulon à came.

3. Prenez un tournevis cruciforme et tournez le verrou à came dans le sens des aiguilles d’une mon-

tre pour verrouiller le boulon à came sur place.

COLLE

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Allen + Roth Inneneinrichtung Handbücher

Allen + Roth

Allen + Roth L-DN2000SAL-B-TT Bedienungsanleitung

Allen + Roth

Allen + Roth FWA70317-B Bedienungsanleitung

Allen + Roth

Allen + Roth LG-2156-L-E Bedienungsanleitung

Allen + Roth

Allen + Roth 1954WC-24-278 Bedienungsanleitung

Allen + Roth

Allen + Roth BRINKHAVEN 48AG Bedienungsanleitung

Allen + Roth

Allen + Roth CLARITA 60W Bedienungsanleitung

Allen + Roth

Allen + Roth LG-2156-SM Bedienungsanleitung

Allen + Roth

Allen + Roth 32409TNVLG Bedienungsanleitung

Allen + Roth

Allen + Roth NORRIS 42RAL Bedienungsanleitung

Allen + Roth

Allen + Roth 2808427 Bedienungsanleitung

Allen + Roth

Allen + Roth WSWS-VSK1648-1C Bedienungsanleitung

Allen + Roth

Allen + Roth BISTRO 1129 Bedienungsanleitung

Allen + Roth

Allen + Roth L-DN2398SAL-T Bedienungsanleitung

Allen + Roth

Allen + Roth YORKSHIRE 1412WC-24-201 Bedienungsanleitung

Allen + Roth

Allen + Roth LWSK72VG Bedienungsanleitung

Allen + Roth

Allen + Roth BRAWLEY 1960VA-30-267-900-UM Bedienungsanleitung

Allen + Roth

Allen + Roth 1227VA-30-201-900-SR Bedienungsanleitung

Allen + Roth

Allen + Roth FELIX 60VG Bedienungsanleitung

Allen + Roth

Allen + Roth BUCHAN BAY FWS60639 Bedienungsanleitung

Allen + Roth

Allen + Roth 9V316V36 Bedienungsanleitung

Allen + Roth

Allen + Roth FRA70328A Bedienungsanleitung

Allen + Roth

Allen + Roth 710.146.000 Bedienungsanleitung

Allen + Roth

Allen + Roth 907-2 Bedienungsanleitung

Allen + Roth

Allen + Roth Hartford WSL72VSJ Bedienungsanleitung

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung