Alliance Laundry Systems UWL035K12 Betriebsanleitung

www.alliancelaundry.com

PHM1414C

Part No. F8301401ENR4

November 2014

Washer-Extractor

Pocket Hardmount

Refer to page 7 for Model Numbers

Troubleshooting

means without the expressed written consent of the publisher.

F8301401ENR4 1

Table of

Contents

Safety Information.............................................................................. 2

Explanation of Safety Messages........................................................... 2

General Safety Precautions................................................................... 2

Important Safety Instructions ............................................................... 3

Safety Decals ........................................................................................ 5

Operator Safety..................................................................................... 5

Introduction......................................................................................... 6

Customer Service.................................................................................. 6

Serial Plate Location............................................................................. 6

Model Identification ............................................................................. 7

Theory of Operation ........................................................................... 8

Starting the Machine............................................................................. 8

Fill......................................................................................................... 8

Supply ................................................................................................... 8

Wash ..................................................................................................... 8

Drain ..................................................................................................... 8

Extract................................................................................................... 8

Troubleshooting .................................................................................. 9

1. Machine Will Not Start Cycle........................................................ 10

2. Door Will Not Unlock at End of the Cycle.................................... 12

3. No External Supplies ..................................................................... 14

4. Excessive Vibration and/or Noise During Spin

(Drawing 1 of 2)............................................................................. 16

Excessive Vibration and/or Noise During Spin

(Drawing 2 of 2)............................................................................. 17

5. Machine Does Not Fill with Water ................................................ 18

6. No Display ..................................................................................... 20

7. No Outputs ..................................................................................... 22

8. Excessive Cycle Time.................................................................... 24

9. No Keypad Function ...................................................................... 25

10. Abnormal Operation ...................................................................... 26

11. No High Extract ............................................................................. 28

12. No Extract (F and V-speed Models) .............................................. 29

13. No Extract (2 Speed Models)......................................................... 31

14. No Basket Rotation (2 Speed Models)........................................... 33

15. No Rotation with Drive Fault......................................................... 35

16. No Rotation without Drive Fault ................................................... 36

17. EFS Error – Fixed Speed Models .................................................. 37

18. EFS Error – Variable Speed Models.............................................. 39

19. Heat Error (Machines with Auxiliary Heat Only) ......................... 41

20. Control Will Not Allow PDA to Download

a Machine Cycle it is Currently Running....................................... 43

Safety Information

Explanation of Safety Messages

Throughout this manual and on machine decals, you

will find precautionary statements (“DANGER,”

“WARNING,” and “CAUTION”) followed by specific

instructions. These precautions are intended for the

personal safety of the operator, user, servicer, and

those maintaining the machine.

Additional precautionary statements (“IMPORTANT”

and “NOTE”) are followed by specific instructions.

IMPORTANT: The word “IMPORTANT” is used

to inform the reader of specific procedures where

minor machine damage will occur if the procedure

is not followed.

NOTE: The word “NOTE” is used to communicate

installation, operation, maintenance or servicing

information that is important but not hazard

related.

General Safety Precautions

In the interest of safety, some general precautions

relating to the operation of this machine follow.

Danger indicates the presence of a hazard

that will cause severe personal injury,

death or substantial property damage if

the danger is ignored.

DANGER

Warning indicates the presence of a

hazard that can cause severe personal

injury, death or substantial property

damage if the warning is ignored.

WARNING

Caution indicates the presence of a

hazard that will or can cause minor

personal injury or property damage if the

caution is ignored.

CAUTION

• Failure to install, maintain and/or

operate this product according to the

manufacturer’s instructions may result

in conditions which can produce

serious injury, death and/or property

damage.

• Do not repair or replace any part of the

product or attempt any servicing unless

specifically recommended or published

in this Service Manual and unless you

understand and have the skills to carry

out the servicing.

• Whenever ground wires are removed

during servicing, these ground wires

must be reconnected to ensure that the

product is properly grounded and to

reduce the risk of fire, electric shock,

serious injury or death.

W006R2

WARNING

To reduce the risk of electric shock, fire,

explosion, serious injury or death:

• Disconnect electric power to the

washer-extractor before servicing.

• Never start the washer-extractor with

any guards/panels removed.

• Whenever ground wires are removed

during servicing, these ground wires

must be reconnected to ensure that the

washer-extractor is properly grounded.

W460

WARNING

Repairs that are made to your products

by unqualified persons can result in

hazards due to improper assembly or

adjustments subjecting you, or the

inexperienced person making such

repairs, to the risk of serious injury,

electrical shock, or death.

W007

WARNING

Safety Information

F8301401ENR4

Always contact your dealer, distributor, service agent

or the manufacturer about any problems or conditions

you do not understand.

Important Safety Instructions

1. Read all instructions before using the washer.

2. Refer to the GROUNDING INSTRUCTIONS in

the INSTALLATION manual (supplied with your

washer) for the proper grounding of the washer.

3. Do not wash textiles that have been previously

cleaned in, washed in, soaked in or spotted with

gasoline, kerosene, waxes, cooking oils, dry-

cleaning solvents or other flammable or

explosive substances. They give off vapors that

could ignite or explode.

4. Do not add gasoline, dry-cleaning solvents or

other flammable or explosive substances to the

wash water. These substances give off vapors that

could ignite or explode.

5. Under certain conditions, hydrogen gas may be

produced in a hot water system that has not been

used for two weeks or more. HYDROGEN GAS

IS EXPLOSIVE. If the hot water system has not

been used for such a period, before using a

washer, turn on all hot water faucets and let the

water flow from each for several minutes. This

will release any accumulated hydrogen gas. The

gas is flammable. Do not smoke or use an open

flame during this time.

6. Do not allow children to play on or in a washer.

Close supervision of children is necessary when

the washer is used near children.

7. Before the washer is removed from service or

discarded, remove the door to the washing

compartment.

8. Do not reach into the washer if the wash drum is

moving.

9. Do not install or store the washer where it will be

exposed to water and/or weather.

10. Do not tamper with the controls.

11. Do not repair or replace any part of the washer or

attempt any servicing unless specifically

recommended in the user-maintenance

instructions or in published user-repair

instructions that the user understands and has the

skills to carry out.

12. To reduce the risk of an electrical shock or fire,

DO NOT use an extension cord or an adapter to

connect the washer to an electrical power source.

13. Use the washer only for its intended purpose,

washing clothes.

14. Never wash machine parts or automotive parts in

the machine. This could result in serious damage

to the basket.

15. ALWAYS disconnect the washer from its

electrical supply before attempting any service.

16. Install the washer according to the

INSTALLATION INSTRUCTIONS. All

connections for water, drain, electrical power and

grounding must comply with local codes and,

when required, be made by licensed personnel.

17. To reduce the risk of fire, textiles which have

traces of any flammable substances such as

vegetable oil, cooking oil, machine oil,

flammable chemicals, thinner, etc. or anything

containing wax or chemicals such as in mops or

cleaning cloths, must not be put into the washer.

These flammable substances may cause the

fabric to ignite.

18. Do not use fabric softeners or products to

eliminate static unless recommended by the

manufacturer of the fabric softener or product.

19. Keep the washer in good condition. Bumping or

dropping the washer can damage its safety

features. If this occurs, have the washer checked

by a qualified service person.

If you or an unqualified person perform

service on your product, you must

assume the responsibility for any

personal injury or property damage which

may result. The manufacturer will not be

responsible for any injury or property

damage arising from improper service

and/or service procedures.

W008

WARNING

To reduce the risk of fire, electric shock,

serious injury or death to persons when

using your washer, follow these basic

precautions:

W023

WARNING

Safety Information

F8301401ENR4

20. If the supply cord is damaged, it must be replaced

by a special cord or assembly available from the

manufacturer or its service agent.

21. Be sure that water connections have a shut-off

valve and that fill hose connections are tight.

CLOSE the shut-off valves at the end of each

wash day.

22. The loading door MUST BE CLOSED any time

the washer is to fill, tumble or spin. DO NOT

bypass the loading door switch and permit the

washer to operate with the loading door open.

23. Always read and follow the manufacturer’s

instructions on packages of laundry and cleaning

aids. Heed all warnings and precautions. To

reduce the risk of poisoning or chemical burns,

keep them out of the reach of children at all times

(preferably in a locked cabinet).

24. Always follow the fabric care instructions

supplied by the textile manufacturer.

25. Never operate the washer with any guards and/or

panels removed.

26. DO NOT operate the washer with missing or

broken parts.

27. DO NOT bypass any safety devices.

28. Failure to install, maintain and/or operate this

washer according to the manufacturer's

instructions may result in conditions that can

produce bodily injury and/or property damage.

NOTE: The WARNING and IMPORTANT

SAFETY INSTRUCTIONS appearing in this

manual are not meant to cover all possible

conditions and situations that may occur. Common

sense, caution and care must be exercised when

installing, maintaining and operating the washer.

Any problems or conditions not understood should be

reported to the dealer, distributor, service agent or the

manufacturer.

IMPORTANT: Ensure that the recommended

clearances for inspection and maintenance are

provided. Never allow the inspection and

maintenance space to be blocked.

This machine must be installed, adjusted,

and serviced by qualified electrical

maintenance personnel familiar with the

construction and operation of this type of

machinery. They must also be familiar

with the potential hazards involved.

Failure to observe this warning may result

in personal injury and/or equipment

damage, and may void the warranty.

SW004

WARNING

Install the machine on a level floor of

sufficient strength. Failure to do so may

result in conditions which can produce

serious injury, death and/or property

damage.

W703

WARNING

Be careful around the open door,

particularly when loading from a level

below the door. Impact with door edges

can cause personal injury.

SW025

CAUTION

Never touch internal or external steam

pipes, connections, or components.

These surfaces can be extremely hot and

will cause severe burns. The steam must

be turned off and the pipe, connections,

and components allowed to cool before

the pipe can be touched.

SW014

WARNING

Safety Information

F8301401ENR4

Safety Decals

Safety decals appear at crucial locations on the

machine. Failure to maintain legible safety decals

could result in injury to the operator or service

technician.

To provide personal safety and keep the machine in

proper working order, follow all maintenance and

safety procedures presented in this manual. If

questions regarding safety arise, contact the

manufacturer immediately.

Use manufacturer-authorized spare parts to avoid

safety hazards.

Operator Safety

To ensure the safety of machine operators, the

following maintenance checks must be performed

daily:

1. Prior to operating the machine, verify that all

warning signs are present and legible. Missing or

illegible signs must be replaced immediately.

Make certain that spares are available.

2. Check door interlock before starting operation of

the machine:

a. Attempt to start the machine with the door

open. The machine should not start with the

door open.

b. Close the door without locking it and attempt

to start the machine. The machine should not

start with the door unlocked.

c. Close and lock the door and start a cycle.

Attempt to open the door while the cycle is in

progress. The door should not open.

If the door lock and interlock are not functioning

properly, call a service technician.

3. Do not attempt to operate the machine if any of

the following conditions are present:

a. The door does not remain securely locked

during the entire cycle.

b. Excessively high water level is evident.

c. Machine is not connected to a properly

grounded circuit.

Do not bypass any safety devices in the machine.

NEVER insert hands or objects into

basket until it has completely stopped.

Doing so could result in serious injury.

SW012

WARNING

Never operate the machine with a

bypassed or disconnected balance

system. Operating the machine with

severe out-of-balance loads could result

in personal injury and serious equipment

damage.

SW039

WARNING

Introduction

Customer Service

Alliance Laundry Systems is not responsible for

personal injury or property damage resulting from

improper service. Review all service information

before beginning repairs.

If literature or replacement parts are required, contact

the source from whom the machine was purchased or

contact Alliance Laundry Systems at (920) 748-3950

for the name of the nearest authorized parts distributor.

For technical assistance, call either of these numbers

(920) 748-3121 Ripon, Wisconsin or +32 56 41 20 54

Wevelgem, Belgium.

Serial Plate Location

When calling or writing about your product, be sure to

mention model and serial numbers. Model and serial

numbers are located on serial plate(s) as shown.

PHM2102S

Introduction

F8301401ENR4

Model Identification

Information in this manual is applicable to these

washer-extractor models:

UWL035K12

UWL035K1L

UWL035K1M

UWL060K12

UWL060K1L

UWL060K1M

UWL080K1M

UWL100K1M

UWL125K1M

UWN035K12

UWN035K1L

UWN035K1M

UWN060K12

UWN060K1L

UWN060K1M

UWN080K1M

UWN100K1M

UWN125K1M

UWU035K12

UWU035K1L

UWU035K1M

UWU060K12

UWU060K1L

UWU060K1M

UWU080K1M

UWU100K1M

UWU125K1M

Theory of Operation

Starting the Machine

The door lock will not allow a cycle to be started until

the door has been closed.

Fill

The operator selects a cycle and starts the machine.

Water enters the machine through water valves that are

controlled by the microcomputer. As water fills the

basket, a column of air is trapped in a pressure bulb

and hose. The air pressure continues to increase as the

basket fills with water. When the desired water level is

reached, the water level switch triggers the

microcomputer and the water valves turn off.

On designs 1 and 2, vacuum breaker installed in the

inlet plumbing or a shell overflow and air gap prevents

the backflow of water.

Supply

The operator can either connect external liquid

supplies to the machine or fill the supply dispenser

with liquid or dry supplies. The supply dispenser's

nozzles flush the compartments with water at the

appropriate times throughout a cycle.

Wash

The basket includes ribs that lift the laundry from the

wash water. The laundry then tumbles back into the

bath.

1 dual-speed motor drives the basket’s shaft with a V-

belt.

UW washer-extractors use two flange-type bearings

that are bolted to the frame.

Drain

UW washer-extractors use a normally open gravity-

type drain system. No pump is used. When the drain

valve opens, the perforated basket allows water to

drain from it.

In the event of a power failure, the drain valve will

open automatically and the machine will drain.

This model washer-extractor includes a single drain

valve.

Extract

A final high-speed extract step removes water from the

load, which maximizes drying efficiency.

The door lock system will not allow the door to be

opened until the cycle has finished.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Alliance Laundry Systems Waschmaschine Handbücher

Alliance Laundry Systems

Alliance Laundry Systems UW150PV Series Programmierhandbuch

Alliance Laundry Systems

Alliance Laundry Systems SW039 Betriebsanleitung

Alliance Laundry Systems

Alliance Laundry Systems W446I Leitfaden

Alliance Laundry Systems

Alliance Laundry Systems C003292ENR1 Betriebsanleitung

Alliance Laundry Systems

Alliance Laundry Systems FLW1526C Bedienungsanleitung

Alliance Laundry Systems

Alliance Laundry Systems H3 Bedienungsanleitung

Alliance Laundry Systems

Alliance Laundry Systems TLW22C_SVG Bedienungsanleitung

Alliance Laundry Systems

Alliance Laundry Systems LWB19A*-1109 series Bedienungsanleitung

Alliance Laundry Systems

Alliance Laundry Systems CHM166C Betriebsanleitung

Alliance Laundry Systems

Alliance Laundry Systems PHM798N Bedienungsanleitung

Alliance Laundry Systems

Alliance Laundry Systems FLW1548C SVG Bedienungsanleitung

Alliance Laundry Systems

Alliance Laundry Systems D1528ENR3 Fehlerbehebungshandbuch

Alliance Laundry Systems

Alliance Laundry Systems BWNBC2PP113TW01 Installationshandbuch

Alliance Laundry Systems

Alliance Laundry Systems HFNKCASG113TN01 Bedienungsanleitung

Alliance Laundry Systems

Alliance Laundry Systems 800138R2 Betriebsanleitung

Alliance Laundry Systems

Alliance Laundry Systems SC70 Leitfaden

Alliance Laundry Systems

Alliance Laundry Systems WB2 350B Series Wartungs- und Serviceanleitung

Alliance Laundry Systems

Alliance Laundry Systems 802715 Bedienungsanleitung

Alliance Laundry Systems

Alliance Laundry Systems NetMaser Series Betriebsanleitung

Alliance Laundry Systems

Alliance Laundry Systems UW POCKET HARDMOUNT UW35B2 Fehlerbehebungshandbuch

Alliance Laundry Systems

Alliance Laundry Systems Home laundry Automatic Clothes Washers Bedienungsanleitung

Alliance Laundry Systems

Alliance Laundry Systems UW35TV Bedienungsanleitung

Alliance Laundry Systems

Alliance Laundry Systems FTS90A*N Bedienungsanleitung

Alliance Laundry Systems

Alliance Laundry Systems NetMaster HC18NC2 Betriebsanleitung

Beliebte Waschmaschine Handbücher anderer Marken

Tricity Bendix

Tricity Bendix AW 1000 W Produkthandbuch

Panasonic

Panasonic NA-F60L5WRB Bedienungsanleitung

GE WSLP1500 Handbuch

Electrolux

Electrolux EWF1284EDW Bedienungsanleitung

Bosch

Bosch WAN2829BSN Bedienungsanleitung

LG TV2516DV3B Bedienungsanleitung

LG TH2517DSAV Bedienungsanleitung

VESTEL

VESTEL CMH-XL 7510 TE Bedienungsanleitung

AEG

AEG 74335 Bedienungsanleitung

Johnson

Johnson JWF721A Bedienungsanleitung

Beko

Beko WTE7604XLW0 Bedienungsanleitung

Danby

Danby DTT100A1WDB Montageanleitung

Amica

Amica WA 14 Ex Bedienungsanleitung

Daewoo

Daewoo DWD-F1222 Bedienungsanleitung

Bosch

Bosch WAS28461AU Bedienungsanleitung

Miele

Miele PW 6080 Vario Bedienungsanleitung

Finlux

Finlux FLX108CF220 Bedienungsanleitung

Whirlpool

Whirlpool 3LBR5132AN0 Bedienungsanleitung