Alliance Laundry Systems UW35PV Series Bedienungsanleitung

Programming

www.comlaundry.com

Washer-Extractor

Pocket Hardmount

Vari a b le - S pee d

WE-6 Control

MC010J

Part No. F232210

August 2004

Keep These Instructions for Future Reference.

(If this machine changes ownership, this manual must accompany machine.)

means without the expressed written consent of the publisher.

F232210 1

Table of

Contents

Introduction......................................................................................... 3

Model Identification ............................................................................. 3

Nameplate Location.............................................................................. 3

Customer Service.................................................................................. 3

Introduction........................................................................................... 5

LED Display .................................................................................... 5

Simulator.......................................................................................... 5

Safety Information.............................................................................. 7

Explanation of Safety Messages........................................................... 7

Important Safety Instructions ............................................................... 7

Programming ...................................................................................... 9

Keypad Identification ........................................................................... 9

Entering Program Mode ....................................................................... 9

Setup Mode........................................................................................... 10

To Enter Setup Mode ....................................................................... 11

Programming Tutorial .......................................................................... 14

Programming Hints............................................................................... 17

Test Cycle ............................................................................................. 17

Wet Clean Testing............................................................................ 18

Manual Mode Control Feature.............................................................. 18

Auxiliary Connections ..................................................................... 19

Balance Timing Sequence for Information on

Preprogrammed Cycles ...................................................................... 19

Cycle Programming .............................................................................. 20

Displaying a Cycle in Memory ........................................................ 20

Editing a Cycle................................................................................. 21

Erasing a Cycle in Memory ............................................................. 22

Programming a Wet Clean Cycle .................................................... 22

Step Programming ................................................................................ 22

Programming a Fill without Spray................................................... 22

Programming a Fill Temperature..................................................... 22

Programming a Supply Step – Models with 8 Supplies .................. 24

Programming Heat ........................................................................... 27

Programming a Wash Step............................................................... 27

Programming a Wash 5 Thermal Cool-down .................................. 28

Programming No Reversing ............................................................ 29

Programming a Soak Step................................................................ 29

Programming a Drain Step............................................................... 30

Programming a Flush Step............................................................... 30

Programming a Reuse Drain Step with Third Party Water

Reuse System ................................................................................. 30

Programming a Fill through Auxiliary Fill Valve with

Third Party Water Reuse System ................................................... 31

Programming a Spin Step ................................................................ 31

Spins................................................................................................. 32

Stop Routine..................................................................................... 32

Programming a Spray Rinse Step .................................................... 32

Auxiliary .......................................................................................... 33

2F232210

Balance Detection................................................................................. 34

Balance Switch Detection ................................................................ 34

Simulator Operation and Program Transfer ......................................... 35

Simulator Operation......................................................................... 35

Transferring All Cycles from Computer to Simulator..................... 37

Transferring One Cycle from Computer to Simulator..................... 37

Transferring All Cycles from Simulator to Computer..................... 37

Transferring One Cycle from Simulator to Computer..................... 38

Preprogrammed Cycles......................................................................... 38

Cycle Categories .............................................................................. 39

Standard Supply Legend .................................................................. 39

Standard Cycle Charts...................................................................... 40

F232210

Introduction

Model Identification

Information in this manual is applicable to these

models:

* This manual applies to models with U5, U6, U7 or U8 in the

8th and 9th, or 9th and 10th positions in the model number

(e.g., UW60PVXU80001).

Nameplate Location

The nameplate is located above supply valve box,

below inverter exhaust fan and at top of module.

Always provide the machine’s serial number and

model number when ordering parts or when seeking

technical assistance. Refer to Figure 1.

Figure 1

Customer Service

For technical assistance, contact your local distributor

or call:

(920) 748-3121

Ripon, Wisconsin

A record of each washer-extractor is on file with the

manufacturer. Always provide the machine’s serial

number and model number when ordering parts or

when seeking technical assitance. Refer to Figure 1.

UW35PV* UW100PV*

UW60PV* UW125PV*

UW80PV*

PHM586N

1Near Supply Valves

2Below Inverter Exhaust Fan

3Top of Module

PHM586N

Introduction

F232210

Figure 2

Model Number Familiarization Guide

Sample Model Number: UW60PVXU80001

UW Model Number Prefix

60 Washer-Extractor Capacity (pounds dry weight of laundry)

PType of Electrical Control P = WE-6 Control

VWasher-Extractor Speed Capabilities V = 7 Speeds

XElectrical Characteristics

U8 Design Series

0001 Option Identification (varies from machine to machine)

PHM533R

UW60PVXU80001

00000000000

200 –240

50 –60 2/3 1/3

60 27 813

N/A N/A 0.0

ETL Listed

Conforms To ANSI/UL Std. 1206, 3rd Ed

Certified To CAN/CSA Std. C22.2 No.53-1968

Drawings:

EXAMPLE OF NAMEPLATE

Introduction

F232210

Introduction

The WE-6 control is a field-programmable solid-state

control capable of storing and running up to 39

preprogrammed ready-to-use cycles. A detailed

description of these cycles can be found in the

Standard Cycle Charts section.

Never turn the power off while the control mode

switch is in the PROGRAM position. Such action will

disorder portions of the programmed data,

necessitating reprogramming of some or all of the

existing cycles. Always return the mode switch to

RUN position before turning the power off.

Never leave the mode switch key inserted in the switch

lock where it may be accessible to unauthorized

personnel not familiar with programming procedures.

The control in this washer-extractor is continuously on

the alert for problems within the machine. When the

control detects a problem, it immediately flashes a

letter or number or both on the display. It may activate

the signal buzzer as well.

LED Display

The WE-6 control has a six-digit LED display.

References to display indications pertain to the first

four digits of the display reading left to right. The last

two digits on the right side of the display will indicate

either the last cycle used or the current cycle in

progress. Refer to Figure 3.

Figure 3

Table 2 lists the various displays and what they mean.

Simulator

A simulator, available at extra cost, is an optional

accessory that allows the user to preprogram cycles for

all WE-6 control washer-extractors in a facility. The

information is preprogrammed into the simulator, the

simulator is connected to the washer-extractor needing

updates a, and the preprogrammed information is

downloaded into the WE-6 control on the washer-

extractor.

MC007A

1Function Being Executed

2Step Number

3Cycle Number

Notes

F232210

Safety Information

Explanation of Safety Messages

Precautionary statements (“DANGER,”“WARNING,”

and “CAUTION”), followed by specific instructions,

are found in this manual and on machine decals. These

precautions are intended for the personal safety of the

operator, user, servicer, and those maintaining the

machine.

Additional precautionary statements (“IMPORTANT”

and “NOTE”) are followed by specific instructions.

IMPORTANT: The word “IMPORTANT” is used

to inform the reader of specific procedures where

minor machine damage will occur if the procedure

is not followed.

NOTE: The word “NOTE” is used to communicate

installation, operation, maintenance or servicing

information that is important but not hazard

related.

Important Safety Instructions

1. Read all instructions before using the washer.

2. Refer to the GROUNDING INSTRUCTIONS in

the INSTALLATION manual for the proper

grounding of the washer.

3. Do not wash textiles that have been previously

cleaned in, washed in, soaked in, or spotted with

gasoline, dry-cleaning solvents, or other

flammable or explosive substances as they give

off vapors that could ignite or explode.

4. Do not add gasoline, dry-cleaning solvents, or

other flammable or explosive substances to the

wash water. These substances give off vapors that

could ignite or explode.

5. Under certain conditions, hydrogen gas may be

produced in a hot water system that has not been

used for two weeks or more. HYDROGEN GAS

IS EXPLOSIVE. If the hot water system has not

been used for such a period, before using a

washing machine or combination washer-dryer,

turn on all hot water faucets and let the water

flow from each for several minutes. This will

release any accumulated hydrogen gas. The gas is

flammable, do not smoke or use an open flame

during this time.

6. Do not allow children to play on or in the washer.

Close supervision of children is necessary when

the washer is used near children. This is a safety

rule for all appliances.

7. Before the washer is removed from service or

discarded, remove the door to the washing

compartment.

8. Do not reach into the washer if the wash drum is

moving.

DANGER indicates the presence of a

hazard that will cause severe personal

injury, death, or substantial property

damage if the danger is ignored.

DANGER

WARNING indicates the presence of a

hazard that can cause severe personal

injury, death, or substantial property

damage if the warning is ignored.

WARNING

CAUTION indicates the presence of a

hazard that will or can cause minor

personal injury or property damage if the

caution is ignored.

CAUTION

To reduce the risk of fire, electric shock,

serious injury or death to persons when

using your washer, follow these basic

precautions:

W023

WARNING

Safety Information

F232210

9. Do not install or store the washer where it will be

exposed to water and/or weather.

10. Do not tamper with the controls.

11. Do not repair or replace any part of the washer, or

attempt any servicing unless specifically

recommended in the user-maintenance

instructions or in published user-repair

instructions that the user understands and has the

skills to carry out.

12. To reduce the risk of an electric shock or fire, DO

NOT use an extension cord or an adapter to

connect the washer to the electrical power source.

13. Use washer only for its intended purpose,

washing textiles.

14. Never wash machine parts or automotive parts in

the machine. This could result in serious damage

to the basket.

15. ALWAYS disconnect the washer from electrical

supply before attempting any service. Disconnect

the power cord by grasping the plug, not the cord.

16. Install the washer according to the

INSTALLATION INSTRUCTIONS. All

connections for water, drain, electrical power and

grounding must comply with local codes and be

made by licensed personnel when required.

17. To reduce the risk of fire, textiles which have

traces of any flammable substances such as

vegetable oil, cooking oil, machine oil,

flammable chemicals, thinner, etc., or anything

containing wax or chemicals such as in mops and

cleaning cloths, must not be put into the washer.

These flammable substances may cause the

fabric to catch on fire by itself.

18. Do not use fabric softeners or products to

eliminate static unless recommended by the

manufacturer of the fabric softener or product.

19. Keep washer in good condition. Bumping or

dropping the washer can damage safety features.

If this occurs, have washer checked by a qualified

service person.

20. Replace worn power cords and/or loose plugs.

21. Be sure water connections have a shut-off valve

and that fill hose connections are tight. CLOSE

the shut-off valves at the end of each wash day.

22. Loading door MUST BE CLOSED any time the

washer is to fill, tumble or spin. DO NOT bypass

the loading door switch by permitting the washer

to operate with the loading door open.

23. Always read and follow manufacturer’s

instructions on packages of laundry and cleaning

aids. Heed all warnings or precautions. To reduce

the risk of poisoning or chemical burns, keep

them out of the reach of children at all times

(preferably in a locked cabinet).

24. Always follow the fabric care instructions

supplied by the textile manufacturer.

25. Never operate the washer with any guards and/or

panels removed.

26. DO NOT operate the washer with missing or

broken parts.

27. DO NOT bypass any safety devices.

28. Failure to install, maintain, and/or operate this

washer according to the manufacturer’s

instructions may result in conditions which can

produce bodily injury and/or property damage.

NOTE: The WARNINGS and IMPORTANT

SAFETY INSTRUCTIONS appearing in this

manual are not meant to cover all possible

conditions and situations that may occur. Common

sense, caution and care must be exercised when

installing, maintaining, or operating the washer.

Any problems or conditions not understood should be

reported to the dealer, distributor, service agent or the

manufacturer.

Andere Handbücher für UW35PV Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Alliance Laundry Systems Waschmaschine Handbücher

Alliance Laundry Systems

Alliance Laundry Systems UW100AV Fehlerbehebungshandbuch

Alliance Laundry Systems

Alliance Laundry Systems UW35PV Series Bedienungsanleitung

Alliance Laundry Systems

Alliance Laundry Systems BWT820*N1102 Programmierhandbuch

Alliance Laundry Systems

Alliance Laundry Systems HWNLX2SP111CW01 Betriebsanleitung

Alliance Laundry Systems

Alliance Laundry Systems 802733R4 Leitfaden

Alliance Laundry Systems

Alliance Laundry Systems Frontload Washers Bedienungsanleitung

Alliance Laundry Systems

Alliance Laundry Systems HFNBCF Betriebsanleitung

Alliance Laundry Systems

Alliance Laundry Systems LWS45M series Bedienungsanleitung

Alliance Laundry Systems

Alliance Laundry Systems UX55PVXF6 Betriebsanleitung

Alliance Laundry Systems

Alliance Laundry Systems CS2000 Stücklistenhandbuch

Alliance Laundry Systems

Alliance Laundry Systems F232198R4 Fehlerbehebungshandbuch

Alliance Laundry Systems

Alliance Laundry Systems FTS90A*N Montageanleitung

Alliance Laundry Systems

Alliance Laundry Systems UW150PV Series Programmierhandbuch

Alliance Laundry Systems

Alliance Laundry Systems 802749r1 Bedienungsanleitung

Alliance Laundry Systems

Alliance Laundry Systems UW35S2 Betriebsanleitung

Alliance Laundry Systems

Alliance Laundry Systems FLW1548C SVG Bedienungsanleitung

Alliance Laundry Systems

Alliance Laundry Systems F232136R5 Fehlerbehebungshandbuch

Alliance Laundry Systems

Alliance Laundry Systems Washer-Extractor Bedienungsanleitung

Alliance Laundry Systems

Alliance Laundry Systems AA3410 Bedienungsanleitung

Alliance Laundry Systems

Alliance Laundry Systems LTZ97A N2802 Series Bedienungsanleitung

Alliance Laundry Systems

Alliance Laundry Systems UW POCKET HARDMOUNT UW35B2 Fehlerbehebungshandbuch

Alliance Laundry Systems

Alliance Laundry Systems UW100TV Bedienungsanleitung

Alliance Laundry Systems

Alliance Laundry Systems H2641 Leitfaden

Alliance Laundry Systems

Alliance Laundry Systems CL9163 Bedienungsanleitung

Beliebte Waschmaschine Handbücher anderer Marken

Tricity Bendix

Tricity Bendix AW 1000 W Produkthandbuch

Panasonic

Panasonic NA-F60L5WRB Bedienungsanleitung

GE WSLP1500 Handbuch

Electrolux

Electrolux EWF1284EDW Bedienungsanleitung

LG TV2516DV3B Bedienungsanleitung

LG TH2517DSAV Bedienungsanleitung

VESTEL

VESTEL CMH-XL 7510 TE Bedienungsanleitung

AEG

AEG 74335 Bedienungsanleitung

Johnson

Johnson JWF721A Bedienungsanleitung

Beko

Beko WTE7604XLW0 Bedienungsanleitung

Danby

Danby DTT100A1WDB Montageanleitung

Amica

Amica WA 14 Ex Bedienungsanleitung

Daewoo

Daewoo DWD-F1222 Bedienungsanleitung

Bosch

Bosch WAS28461AU Bedienungsanleitung

Miele

Miele PW 6080 Vario Bedienungsanleitung

Finlux

Finlux FLX108CF220 Bedienungsanleitung

Whirlpool

Whirlpool 3LBR5132AN0 Bedienungsanleitung

Beko

Beko WKB 51231 PTMA Bedienungsanleitung