Allo.com CRA 210 Montageanleitung

CRA-210 User Manual Guide

_______________________________________________________________________________

Page: 1 of 30

CRA – 210

Analog Telephone Adapter

3 Ethernet Port + 2 VoIP Line + 1 PSTN Line

Getting Started Guide

CRA-210 User Manual Guide

_______________________________________________________________________________

Page: 2 of 30

Table of Contents

1. WELCOME - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -5

2. PRODUCT OVERVIEW- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5

2.1.Typical setup of CRA-210 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -5

2.2.Back Panel Ports - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6

2.3.Front Panel Ports - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6

2.4.Key Features - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -7

2.5.Hardware Specifications - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 8

3. INSTALLATION REQUIREMENTS - - - - - - - - - - - - - - - - - - - - - - - - 9

3.1.Package Contents - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 9

3.2.Other Requirements - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -10

4. CONFIGURATION GUIDE - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 10

4.1.Hardware Installation - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 10

4.2.Configuring CRA-210 through Web Browser - - - - - - - - - - - - - - - - - -11

4.2.1. To access your ATA Web Panel with simple guidelines - - - - - - - 11

4.2.2. Login Information - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -13

4.2.3. Network Configuration - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 14

4.2.3.1. LAN Setup - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -14

4.2.3.2. WAN Setup - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 15

4.2.3.3. Port Forwarding and Firewall - - - - - - - - - - - - - - - - - - - -16

4.2.3.4. Advanced Routing - - - - - - - - - - - - - - - - - - - - - - - - - - - -17

4.2.4. VoIP Configuration - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -18

4.2.4.1. SIP Configuration - - - - - - - - - - - - - - - - - - - - - - - - - - - - 18

CRA-210 User Manual Guide

_______________________________________________________________________________

Page: 3 of 30

4.2.4.2. Fax Configuration - - - - - - - - - - - - - - - - - - - - - - - - - - - -19

4.2.4.3. Codec Configuration - - - - - - - - - - - - - - - - - - - - - - - - - - 19

4.2.4.4. Volume Configuration - - - - - - - - - - - - - - - - - - - - - - - - - 19

4.2.4.5. Configuring the PSTN (FXO) Gateway- - - - - - - - - - - - - -20

4.2.4.5.1. Connecting to PSTN to VoIP Services - - - - - - - - - - - -20

4.2.4.5.2. Connecting to VoIP to PSTN Services- - - - - - - - - - - - 22

4.2.4.5.3. Receive a PSTN call from the Phone Port (FXS)directly22

4.2.4.5.4. Make a PSTN call from the Phone Port (FXS) directly- 23

4.2.4.5.5. Maximum Rings - - - - - - - - - - - - - - - - - - - - - - - - - - -23

4.2.4.6. Local Extensions - - - - - - - - - - - - - - - - - - - - - - - - - - - - -24

4.2.4.7. ATA’s Advanced Features - - - - - - - - - - - - - - - - - - - - - - 24

4.2.5. ATA Configuration - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -25

4.2.5.1. User Administration- - - - - - - - - - - - - - - - - - - - - - - - - - -25

4.2.5.2. Password Management - - - - - - - - - - - - - - - - - - - - - - - - -25

4.2.5.3. ATA System Reset - - - - - - - - - - - - - - - - - - - - - - - - - - - 26

4.2.6. Firmware Upgrade - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 27

4.3.Telephony Features - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 28

4.3.1. Call Hold - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -28

4.3.2. Call Waiting - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 28

4.3.3. Call Transfer - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 28

4.3.3.1. Attended Call Transfer - - - - - - - - - - - - - - - - - - - - - - - 28

4.3.3.2. Unattended Call Transfer - - - - - - - - - - - - - - - - - - - - - -28

4.3.4. 3-way Conferencing - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 29

5. COMPLIANCE AND SAFETY INFORMATION - - - - - - - - - - - - - - - -29

5.1.Installation Precautions - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 29

5.2.FCC and CE Notice - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 29

CRA-210 User Manual Guide

_______________________________________________________________________________

Page: 4 of 30

CRA-210 User Manual Guide

_______________________________________________________________________________

Page: 5 of 30

1. WELCOME

Thank you for choosing the CRA-210 for Voice-over-IP. This Phone Adapter will

allow you to make phone or fax calls using your broadband connection.

The CRA-210 offers a rich set of functionality and superb sound quality at ultra-

affordable price. They are fully compatible with SIP industry standard and can

interoperate with many other SIP compliant devices and software on the market.

2. PRODUCT OVERVIEW

The CRA-210 is an Analog Telephone Adapter that allows customers to connect one

analog phone to SIP devices. With the Phone Adapter, your phones or fax machines can

share your high-speed Internet connection and take advantage of it.

You will be able to make phone calls using the account you set up with ITSP (Internet

Telephony Service Provider), even while you’re surfing the Internet. It is also perfect

for connecting home workers to the main office when it is not desirable to use an IP

phone.

2.1. Typical setup of CRA-210

Figure 2-1: Interconnection Diagram of the CRA-210

CRA-210 User Manual Guide

_______________________________________________________________________________

Page: 6 of 30

2.2. Back Panel Ports

The Phone Adapter’s ports are located on the back panel.

Figure 2-1: Back Panel

PHONE Port: For your Internet phone line, this port allows you to connect your

telephone or fax machine to the Phone Adapter using an RJ-11 telephone cable

ETHERNET Port: The ETHERNET port allows you to connect the Phone Adapter to

your router or gateway using a Category 5 Ethernet network cable.

POWER Port: The POWER port is where you will connect the included power

adapter.

RESET BUTTON: To restore CRA-210 into factory default settings. It will change

the configuration back to factory settings, including network settings.

2.3. The Front Panel

The Phone Adapter’s LEDs are located on the front panel.

Figure 2-2: Front Panel

CRA-210 User Manual Guide

_______________________________________________________________________________

Page: 7 of 30

Power LED Green: The Power LED lights up when the Phone Adapter is powered on

and ready.

VoIP LED Green: The VoIP LED lights up only when ATA got registered to any

ITSP SIP account.

ETHERNET LED Green: The ETHERNET LED lights up when the Phone Adapter

is connected to your network through the Ethernet port. It flashes when there is data

being sent or received.

PHONE LED Orange: The PHONE LED is solidly lit when a telephone or fax

machine got registered to any ITSP through Internet connection. (The connection will

get register only if your ITSP account is active). And the PHONE LED changes to

BLUE when the phone is on the hook.

2.4. Key Features

The CRA-210 has the following features.

•Supports SIP V2 (RFC 3261)

•Supports a variety of services such as Caller ID display and generation,

Call transfer, Call waiting, Call holding and 3-way conferencing

•Supports MTU size negotiation,

•Supports Static IP, DHCP Client / Server and PPPoE

•Built-in router, NAT and Gateway

•Supports DHCP IP Reservation, Port Forwarding and Advanced Routing.

•Supports VAD with Silence Suppression, CNG , Echo Cancellation and

Adaptive jitter buffer

•Supports the traditional fax service using T.38 formats

•Supports gain adjustment to FXS ports

•Supports firmware upgrade via HTTP

•Supports Auto-provision

•Support the following codec:

oG.711 A / µ-law

oG.729AB

oG.723

oG.726

CRA-210 User Manual Guide

_______________________________________________________________________________

Page: 8 of 30

2.5. Hardware Specifications

The table below lists the hardware specification of CRA-210

Model

CRA-210

Port

Three RJ-45 10/100 Mbps Ethernet

One Power Port

Two RJ-11 FXS Port

One RJ-11 FXO Port

LED

Power & Ethernet (Green)

Phone (Blue & Orange)

Power Adaptor

Input: 100-240VAC

Output: +12VDC, 1500mA

Dimension

149 mm (W)

180 mm (L)

45 mm (H)

Weight

0.32 kg

Operating Temp.

10° - 40°C

50° - 104°F

Operating Humidity

10% - 90% (non-condensing)

CRA-210 User Manual Guide

_______________________________________________________________________________

Page: 9 of 30

3. INSTALLATION REQUIREMENTS

3.1. Package Contents

Analog Telephone Adapter Unit (CRA-210)Standard Telephone cable (RJ11)

Power Adaptor Ethernet Cable (RJ 45)

Quick Installation Guide

CRA-210 User Manual Guide

_______________________________________________________________________________

Page: 10 of 30

3.2. Other Requirements:

•Telephone Unit

•Broadband Internet connection (DSL or Cable Modem)

•A Router (if you have multiple devices using Internet connections)

•An ITSP VoIP Account

4. CONFIGURATION GUIDE

4.1. Hardware Installation

To install the Analog Telephone Adapter (ATA) follow these instructions.

4.1.1. Connect the Ethernet network cable (RJ45) into the WAN port of the ATA

unit, as shown in Figure 4.1: Connect the other end to the one of the

Ethernet ports on your router or gateway.

Figure 4.1

4.1.2. Connect the Standard Telephone Cable (RJ11) into the phone port labeled

PHONE as shown in Figure 4.2. Connect the other end of the cable to your

telephone. You can plug either phone or fax machine.

Figure 4.2

4.1.3. Connect the included power adapter to the POWER port on the back panel

of the Phone Adapter as shown in Figure 4.3. Connect the other end to a

standard electrical outlet, which will power up the ATA unit.

Andere Handbücher für CRA 210

Inhaltsverzeichnis

Andere Allo.com Adapter Handbücher

Allo.com

Allo.com CRA 210 Bedienungsanleitung

Beliebte Adapter Handbücher anderer Marken

PCB Piezotronics

PCB Piezotronics 090B274 Bedienungsanleitung

Auvidea

Auvidea J20 Produkthandbuch

Gossen MetraWatt

Gossen MetraWatt AT3-III E Bedienungsanleitung

Akribis

Akribis ITF-21-BISS-MIT Bedienungsanleitung

Tenda

Tenda W54U Bedienungsanleitung

ROHO

ROHO AGILITY Bedienungsanleitung

PROLiNK

PROLiNK WN2001 Bedienungsanleitung

Hawking

Hawking HUF2 Bedienungsanleitung

Airlink101

Airlink101 AWLC4030 Bedienungsanleitung

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Bedienungsanleitung

Philips

Philips SWA4554S/10 Bedienungsanleitung

JVC

JVC TS-C9D2B Gebrauchsanweisung

NETGEAR

NETGEAR A6100 Bedienungsanleitung

D-Link

D-Link DWA-121 Bedienungsanleitung

Philips

Philips SWA2037 Bedienungsanleitung

Basalte

Basalte 0610-20 Bedienungsanleitung

Yealink

Yealink EHS40 Bedienungsanleitung

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Bedienungsanleitung