Allway PL20 Merkblatt
Allway Open Wireless Earphone
PL20 Product Instructions
Please read this instructions carefully and keep them properly
①Packaging list：
PL20 *1 Storage bag *1
Magnetic charging cable *1 Product Brochure*1
②Configuration
Product Name: Open Wireless Earphone
Product Model: PL20
Product Size: 125*110*45mm
Distance: ＞10m
Bluetooth Version: BT5.3
Speaker Diameter: 14.2mm
Impedance: 16Ω
Frequency Response: 20Hz-20KHz
Frequency Band: 2.400GHz-2.4835GHz
Battery: 100mAh
Charging time: 1.5h
Usage time: 7h
Standby time: 40h
Input: 5V⎓0.5A
Type of charge: Magnetic charging cable
Material: PC+ABS
Number of connections: 2
Weight: 19.3g
Specifications are laboratory test data.
*Playback times are from Allway acoustic lab tests and may vary depending on equipment settings,
environment, usage and many other factors.
①Touch area ②Noise cancelling mic ③Led ④Sound drain hole ⑤Sound output hole
⑥Charging pin ⑦Sound drain hole ⑧Call mic ⑨Multi-functional Button
③ Operation instruction
Power ON
⚫Short press the Multi-function Button to power on.
⚫When the power is off, the Earphone will automatically turn on when charging.
Power OFF
⚫Long press Multi-function Button 3s to shut down.
⚫Automatic switch-off of the Earphone after a full charge.
①
④
③
②
⑤
⑥
⑦
⑧
⑨
⚫Automatic switch-off after 10min disconnection from Bluetooth.
⚫Automatic switch-off when the power is exhausted.
Pairing
⚫Quickly press the Multi-function button twice to enter pairing mode.
⚫When there is no pairing record, automatically enter pairing mode after power on.
⚫when there is a pairing record, automatically connect back to the paired device after power
on.
Reset
⚫In the power on state, long press the Multi-function Button for 10s.
Multi-Device Connectivity
⚫PL20 supports Multi-device connection: when the Earphone is in pairing, two devices can be
connected at the same time; after pairing timeout, you need to re-enter pairing mode.
Bluetooth Pairing
Step 1 - Turn on your device's Bluetooth and remove the Earphone
Step 2 - Select "Allway PL20" to connect
When the device is connected
to the Earphone, the battery
level of the Earphone is
displayed.
Operating Instructions
Note: Different key functions can be customized through the App.
Call Control
Answer/hang up/Cancel
Call: double touch
Reject: long touch 2s
Music Control
Play/pause: two touches
next song：long touch 2s
Volume Control
Volume up：single touch
Charging Instructions
To Charge The Earphone：
Use the complimentary magnetic charging cable to charge the
Earphone, at which point Bluetooth is automatically disconnected.
Indicator Light Description
Power on Blue light on for 2s
Power off Red light on for 1s
Pairing status Red and blue lights flashing alternately
Earphone charging in Blue light slow flashing
Earphone is fully charged Red light on for 1s
Restore factory settings After the blue light is on for 2s, the red
and blue lights flash alternately
Safety Information
1. Never disassemble the earbuds. There are no user-serviceable parts inside,
2. Do not expose the earbuds to temperatures below 32 F(0 ℃) or to temperatures
above 113°F(45°C).
3.Do not use the earbuds in a thunderstormstorm. This could prevent the earbuds
from working properly, and also increase your chance of being electrically
shocked.
4. Do not use oil or any volatile liquid to clean this product.
5.Do not listen at high volumes for extended periods of time.
6. Do not use the earbuds in traffic.
7.Do not use the earbuds any time it would be dangerous to be unaware of noises
around you.
Allway (1) Year Limited Warranty
Allway warrants to the original retail purchaseer that this product is to be free from
defective materials and workmanship for a period of oneyear from the date of
purchase, if it is properly used and maintained. If this product proves defective in
either material or workmanship, Allway, at its option, will (a) repair the product, or
(b) replace the product, at no charge for parts or labor. If the product model is no
longer available and cannot be repaired effectively or replaced with an identical
model, Allway at its sole option may replace the unit with a current model of equal
or greater value. In some cases, modification to themounting surface may be
required where a new model is substituted. Allway assumes no responsibility or
liability for such modification. To obtain a repair or replacement under the terms of
this wrarranty, please return to dealer first, if possible, and the dealer will direct
you accordingly for reepairs or replacement. You will be required to submit a copy
of the original receipt.
Return shipping for exchanges/repairs is the sole responsibility of the original
retail purchaser,
Limitations:
This limited warranty does not cover failure ofthe product resulting from improper
installation, misuse, abuse, accident, neglect, mishandling, or wear from ordinary
use or environmental deterioration.
This limited warranty does not cover cosmetic damage, including paint damage, or
consequential damage to other components or premises which may result for any
reason from the failure of the product.
This limited warranty is null and void for products not used in accordance with
Allway's instructions.
FCC Caution：
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2)this device must accept any interference received, including interference that
may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
Inhaltsverzeichnis
Andere Allway Kopfhörer Handbücher
