Alpha Alpha CB Boiler Bedienungsanleitung

Installation Instructions

Alpha CB/C/SY Boiler

90° and 45° Flue Bends

Concentric (60/100) Flue System

1. GENERAL

a. The flue system must be installed in accordance with BS 5440:1;1990.

b. The boiler must be installed in accordance with the Installation instructions supplied with the boiler.

c. Each 90° bend is equivalent to 1 metre of flue length.

Each 45° bend is equivalent to 0.5 metre of flue length.

d. For vertical flue applications refer to separate instructions.

e. For horizontal flue applications ensure that there is a slight downward slope towards the terminal.

f. Use the following methods to determine the correct length of horizontal flue required:-

For rear exit flue L = B + 175 mm

For side exit flue L = B + C + 185 mm (min. side clearance required is 5 mm)

Where L = Required length of flue

B = Finished wall thickness

C = Distance from inside wall to the side of the boiler, e.g. C = E + F

g. Note:Forrearorsideflue,cuta110mmdiameterhole(orusea107mmcoredrill)inthewallisrequiredforflueassembly.

h. Refer to the flue options and ensure the flue length does not exceed the maximum equivalent length of 4 metre, or

3 metre when fitted to an Alpha C23/27.

Fig. 1 - Horizontal side flue options

L = B + C + E + 185 mmL = B + C + 185 mm

Front

Kit Part No. 6.1000330 Kit Part No. 6.1000340

Lmax = equivalent flue length of 4 m (except C23/27, Lmax = 3 m)

Compiled and designed by Publications 2000, Tel (01670) 356211

These guidelines have been carefully prepared but we reserve the right to

alter the specification at any time in the interest of product improvement.

03/04/D131

Part No. 6.9174352

2. CUTTING THE FLUE DUCTS TO LENGTH

Refer to the Installation instructions supplied with the boiler.

a. With all the ducts assembled together and one 90° bend fitted to the boiler (see Fig. 1), cut to the following lengths:-

Rear flue Outer air duct length = finished wall thickness + 135 mm

Inner flue duct length = finished wall thickness + 172 mm

Side flue Outer air duct length = finished wall thickness + the distance from the inside wall to the side of the

boiler + 145 mm

Inner flue duct length = finished wall thickness + the distance from the inside wall to the side of the

boiler + 182 mm

Note: When cutting the flue ducts ensure that all cuts are square and burr free.

b. When using a flue bend within the flue length (see Fig. 2), prepare and cut the flue ducts as follows:-

a. Place the bend in the required position and cut/prepare the inner and outer ducts for fitting to one end of the bend.

b. Assemble the bend onto the ducts, as shown in Fig. 4, using the clamp and seal provided.

c. Position the remaining flue in the required position and mark the inner and outer ducts for the connection to the

other end of the bend.

d. Cut/prepare the ducts and assemble them to the bend, as shown in Fig. 4, using the clamp and seal supplied.

Fig. 4

Fig. 2 - Horizontal side flue options

L = B + E + F + 185 mm + (90° bend = 1 metre) L = B + C + 185 mm + (2 x 45° bends = 1 metre)

Top

Fig. 3 - Horizontal flue options

Lmax = equivalent flue length of 4 m (except C23/27, Lmax = 3 m)

Alpha Therm Limited.

Nepicar House, LondonRoad,Wrotham Heath,

Sevenoaks, Kent TN15 7RS

Tel: 0870 3001 964

email: info@alphatherm.co.uk

website: www.alpha-innovation.co.uk

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Alpha Kessel Handbücher

Alpha

Alpha Alpha HE25 Bedienungsanleitung

Alpha

Alpha Alpha 240X Bedienungsanleitung

Alpha

Alpha 47 532 45 Benutzerhandbuch

Alpha

Alpha Alpha CD50 Benutzerhandbuch

Alpha

Alpha Alpha CB24 Benutzerhandbuch

Alpha

Alpha Alpha CB Boiler Bedienungsanleitung

Alpha

Alpha InTec2 26CE Benutzerhandbuch

Alpha

Alpha Alpha 240 Boiler Range Benutzerhandbuch

Alpha

Alpha Evoke 28NX Bedienungsanleitung

Alpha

Alpha al357i-b Bedienungsanleitung

Alpha

Alpha Alpha CD Bedienungsanleitung

Alpha

Alpha Alpha CB50 Boiler Bedienungsanleitung

Alpha

Alpha Alpha HE25 Benutzerhandbuch

Alpha

Alpha Alpha CD25C Bedienungsanleitung

Alpha

Alpha ARES 150 Tec Benutzerhandbuch

Alpha

Alpha SolarSmart 90 Montageanleitung

Alpha

Alpha InTec12S Bedienungsanleitung

Alpha

Alpha Ocean Style FF Bedienungsanleitung

Alpha

Alpha Alpha CD24 Benutzerhandbuch

Alpha

Alpha Alpha CB Boilers Bedienungsanleitung

Alpha

Alpha Alpha Plus DH Units Leitfaden

Alpha

Alpha GasSaver GS-1 Benutzerhandbuch

Alpha

Alpha Alpha CD50 Bedienungsanleitung

Alpha

Alpha Alpha 240XP Bedienungsanleitung

Beliebte Kessel Handbücher anderer Marken

Vaillant

Vaillant uniSTOR VIH SW GB 500 BES Bedienungsanleitung

Radijator

Radijator BIO max 23.1 Bedienungsanleitung

Brunner

Brunner BSV 20 Bedienungsanleitung

Buderus

Buderus Logamax GB062-24 KDE H V2 Bedienungsanleitung

Potterton

Potterton 50e Datenblatt

UTICA BOILERS

UTICA BOILERS TriFire Bedienungsanleitung

Joannes

Joannes LADY Series Handbuch

ECR International

ECR International UB90-125 Gebrauchsanweisung

Froling

Froling P4 Pellet 8 - 105 Bedienungsanleitung

Froling

Froling FHG Turbo 3000 Bedienungsanleitung

U.S. Boiler Company

U.S. Boiler Company K2 Bedienungsanleitung

Henrad

Henrad C95 FF Bedienungsanleitung

NeOvo

NeOvo EcoNox EF 36 Bedienungsanleitung

Potterton

Potterton PROMAX SL 12 Bedienungsanleitung

Eco Hometec

Eco Hometec EC 25 COMPACT Bedienungsanleitung

Viessmann

Viessmann VITODENS 200 Leitfaden

Baxi

Baxi Prime 1.24 Bedienungsanleitung

REXNOVA

REXNOVA ISA 20 BITHERMAL Bedienungsanleitung