PREPARATION OF STRINGING
To clamp the string, squeeze
the toggle to close.
To release
the string,
pull the
toggle to
open.
To tighten, turn the dial
clockwise. To loosen, turn the dial
counter-clockwise. NOTE: Before
stringing a racquet, the tension
on the string clamp has to be
adjusted in accordance with the
type of string gauge being used.
If the string is of a thin gauge
(16L, 17, 18) then the string
clamp may need to be tightened.
If the string gauge is thick (15,
15L, 16) then the string clamp
may need to be loosened.
