Alpine IVE-W530BT Bedienungsanleitung
15.01.2013 1
Bluetooth®Software Update Manual
Using an Android Device
IVE-W530BT
15.01.2013 2
Introduction
This manual describes the steps required for updating the Head Units Bluetooth firmware. Read all
warnings and steps carefully before performing the update.
Improvements
The update improves the following points:
• The Head Units compatibility will be improved from AVRCP1.3 to AVRCP1.4
• Compatibility with new mobile phones.
• iOS6 Bluetooth Audio - displaying the tag information on the Head Unit
• iOS6 Bluetooth Audio - ability to control the iPhone‘s music player from the Head Unit
Requirements
• An Android device with Bluetooth connectivity. This includes built-in Bluetooth adapters or external
USB Bluetooth adapters.
• The Bluetooth adapter must support File Transfer Profile (FTP).
• The Bluetooth firmware update file (Alpine provided).
• An internet connection during pairing process (automatic driver download)
Caution
• Do NOT update the Bluetooth firmware while driving.
• Do NOT turn off the vehicle or remove power from the Head Unit while the unit is
updating. The update will not be performed correctly and the Head Unit may be
damaged.
Notice
• Updating will result in all user information being deleted, including user settings,
paired devices, and phonebook contacts.
• Please contact Alpine Technical Support of your country with any questions
concerning the update process.
Bluetooth Firmware Update Instructions
The Bluetooth firmware update procedure uses a Bluetooth feature known as File Transfer Profile
(FTP) to wirelessly transfer the update file from the PC to the Head Unit. This manual describes the
update process performed using an Android device using a free app.
15.01.2013 3
Download the Bluetooth Firmware and Transfer App to phone
WARNING – Do not update the Bluetooth firmware while driving
1. Preparing the Bluetooth Connection
- Turn ON the Head Unit by setting the vehicles ignition to the Accessory (ACC) position.
- Confirm that the necessary settings for the update are made, such as
1. "BLUETOOTH IN" is set to "HFP+AUDIO"
2. "Visible Mode" is set to "ON"
3. All paired mobile phones are deleted
1. Push the "Setup" button 2. Select "System Setup"
2. Download and install the "Bluetooth File
Transfer" App from the Google play store. 3. Copy "FC6000S_01-27-00.plf"
to a folder on your phone
You can find the latest Bluetooth firmware update on your regions Alpine website. This file
has to be copied to your Android phone for this update. You can find it at your local
Alpine website at www.alpine-europe.com
15.01.2013 4
7. Confirm that "Visible Mode" is set
to ON.
In case there is no paired device, you will not be able to
enter this menu. In that case skip this section.
8. Enter the "Clear Device" menu.
9. Click on a paired device. 10. Confirm by pushing "Yes"
Repeat step 9&10 with other paired devices until the list
is empty
3. Push the "Page DN" button 4. Confirm that "BLUETOOTH IN" is
set to "HFP+AUDIO"
6. Select "Source Setup", then
"Bluetooth Setup"
5. Go back to "Setup Sel." by pushing
the "back" key
15.01.2013 5
2. Creating a Bluetooth Pairing between Android and Head Unit
2. Select the device "Alpine AV Receiver".
1. From the Android devices settings
menu, select the Bluetooth Menu
Android will start to search for new BT devices
3. Confirm that the code is the same on
both devices and push "OK" and
"YES"
4. Check "Don't ask again" and push
"OK"
Depending on the version this dialog might no be shown.
15.01.2013 6
3. Updating the Bluetooth Firmware
WARNING – Do NOT turn off the vehicle or remove power from the Head Unit while
the unit is updating. The update will not be performed correctly and the Head Unit
may be damaged.
1. Make sure the IVE-W530BT is
connected as "Phone and Media
audio"
2. Close the settings menu and open
the "Bluetooth File Transfer" app.
3. Go to the folder that contains the new
BT Firmware file 4. Long push the firmware file and select
"Copy"
15.01.2013 7
6. Select "Firmware Update"
5. In the "BLUETOOTH Setup" push the
"Page down" button
10. On the Android device, select the BT
Tab
8. Select "YES", if you are sure you want
to update
7. Select "YES", twice
9. Now the IVE-W530BT is waiting for the
update file.
15.01.2013 8
12. Select the "Update" folder
11. Select "Alpine AV Receiver"
14. During transmission, this progress
bar will be displayed
13. Long Push into the empty folder and
select "Paste here" on the popup
menu
Even though the progress bar is completed after 40 seconds, the update can take up to 5 minutes. Please
do not interrupt the update process.
15.01.2013 9
15. This error message might be shown.
Ignore it. Important is the small
popup stating "Transfer
completed"
16. After the update has successfully
finished, IVE-W530BT will show this
message
4. Confirming the update
1. In "Bluetooth Setup" menu, push
"Firmware Version" 2. Confirm that the displayed version
number is the same as your
download file
Andere Handbücher für IVE-W530BT
1
Andere Alpine Autoempfänger Handbücher
Alpine
Alpine IVA-D100RB Bedienungsanleitung
Alpine
Alpine CDA-D857 Leitfaden
Alpine
Alpine CDA-9855 Bedienungsanleitung
Alpine
Alpine IVA-D310RB Bedienungsanleitung
Alpine
Alpine CDE-135BT Bedienungsanleitung
Alpine
Alpine ICS-X7 Bedienungsanleitung
Alpine
Alpine TDM-7574E Bedienungsanleitung
Alpine
Alpine CDA-9886R Owner's Bedienungsanleitung
Alpine
Alpine iLX-F903D Bedienungsanleitung
Alpine
Alpine DVA-5200 Bedienungsanleitung
Alpine
Alpine CVA-1014R Bedienungsanleitung
Alpine
Alpine CDE-9874R Bedienungsanleitung
Alpine
Alpine IVA-W200Ri Bedienungsanleitung
Alpine
Alpine CDA-9885 Bedienungsanleitung
Alpine
Alpine iLX-F309E Bedienungsanleitung
Alpine
Alpine iLX-007 Bedienungsanleitung
Alpine
Alpine INA-W910 Bedienungsanleitung
Alpine
Alpine iLX-007E Bedienungsanleitung
Alpine
Alpine KTX-GM8-O Bedienungsanleitung
Alpine
Alpine TDM-7574R Bedienungsanleitung
