ALTA LABS AP6-Pro Bedienungsanleitung

QUICK START GUIDE

MODEL: AP6-Pro

1

Before You Begin

If you have not already created an account,

visit manage.alta.inc to create your free Alta

Control™ account.

manage.alta.inc

Be sure to also download the Alta Control app

on your mobile device.

2

Package Contents

AP6-Pro Mounting Plate Ceiling Mount

Anchors

(Qty. 2)

Wall-Mount

Screws (Qty. 2)

Ceiling Tile

Screws (Qty. 2)

T-Bar Screws Nuts Rubber Feet

Installation Requirements

• CAT 5/6 Ethernet Cabling

• 24V PoE+ Switch or PoE Injector

• Phillips Screwdriver

• Drill and drill bit for wall or ceiling mounting

3

Hardware Overview

Front

LED

Logo Indicator

Logo Indicator If you need to remove the AP

from the mount, use a ﬂat blade screwdriver to

disengage the Mounting Plate here.

LED Illuminates white by default when AP

is online and functional. Can be changed to

blue or off in the Alta Control software. Flashes

when booting.

4

Back

RESET

PoE

Ethernet Port

Reset Button

Reset Button Press down for 10 seconds until

the LED begins ﬂashing to reset the AP6-Pro

to factory defaults.

Ethernet Port Connects to an Ethernet cable

from your PoE+ Switch. An optional 48V, 0.5A

adapter can be purchased and used to power

the AP6-Pro.

5

Hardware Installation

Ceiling Tile Mount

1. Remove the appropriate ceiling tile.

2. Align the Mounting Plate in the desired

location ﬂat on the tile (typically centered).

Mark the areas indicated below for the

screws and the Ethernet cable.

6

3. Secure the Mounting Plate to the Ceiling

Mount with the ceiling tile between using

the two Ceiling Tile Screws and the two Nuts.

Assembled Top View Assembled Bottom View

Proceed to “Connecting The AP6-Pro” on page 13

7

Wall Mount

1. Position the Mounting Plate in the desired

location and use a pencil to mark the holes.

2. If running cabling along the wall, remove the

notch on the AP6-Pro.

RESET

PoE

8

3. Secure the Mounting Plate to the wall

using the Wall-Mount Screws and a Phillips

screwdriver.

If mounting on drywall, use the anchors to

ensure secure mounting. Use a 6 mm drill

bit to drill the holes for the anchors and

insert them in the wall.

Proceed to “Connecting The AP6-Pro” on page 13

9

T-Bar Ceiling TIle Mount

1. Use a small Phillips head screwdriver to

loosen the two pre-installed screws on the

Ceiling Mount to allow enough clearance for

the T-Bar.

Andere Handbücher für AP6-Pro

1

Dieses Handbuch passt für folgende Modelle

1

Inhaltsverzeichnis

Andere ALTA LABS Drahtloser Zugangspunkt Handbücher

ALTA LABS

ALTA LABS AP6-Pro Bedienungsanleitung

Beliebte Drahtloser Zugangspunkt Handbücher anderer Marken

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Bedienungsanleitung

Ubiquiti

Ubiquiti NanoStation NSM2 Bedienungsanleitung

Cisco

Cisco Aironet 1550 Series Bedienungsanleitung

Aruba

Aruba IAP-335 Bedienungsanleitung

Advantek Networks

Advantek Networks AWN-AP-54MR Bedienungsanleitung

IP-COM

IP-COM AP355 Bedienungsanleitung

Buffalo

Buffalo AirStation WLA-L11G Bedienungsanleitung

EnGenius

EnGenius EnStationACv2 Bedienungsanleitung

D-Link

D-Link DAP-3662 Bedienungsanleitung

xG Technology

xG Technology xMax CN1300 Bedienungsanleitung

Widelink

Widelink ezWave WAP-1100 Series Bedienungsanleitung

Edimax

Edimax CAP1200 Bedienungsanleitung

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Bedienungsanleitung

Aruba

Aruba AP-203R Bedienungsanleitung

LuXout Shades

LuXout Shades LUXSHADE MOTION Bedienungsanleitung

CreatComm

CreatComm TB5F Bedienungsanleitung

SineDigital

SineDigital MW-1500AP(H) Bedienungsanleitung

TP-Link

TP-Link AP9650 V1 Bedienungsanleitung