Altec Lansing IMT7012 Bedienungsanleitung
Quick Start Guide
IMT7012
Adapter
AUX. Audio cable
EMERGENCY WIRELESS SPEAKER
1.
USB-A to USB-C charging cable
GENERAL FUNCTIONS
• Bluetooth
• 3.5mm AUX IN audio port
• Speakerphone with integrated hands-free microphone
• AM/ FM/ SW Radio with 5 presets per band
• WB Radio with NOAA/NWS bands
• Specific Area Message Encoding (SAME) alerts (for local area)
• Clock with two alarms
• Backlit LCD display screen
• USB Charging Port
• Built-in Flashlight
• Hazard lights
• Rotary Hand Crank for battery
• Solar Charging Panel with LED Flood light
• Bottle opener
• Storage compartment
USER INTERFACE
3.
2.
Alarm active indicators NOAA SAME alerts active indicator
Battery Life
Alphanumeric
Message
Alarm will play
NOAA broadcasts active indicator
Radio indicator
FEATURES/CONTROLS
4.
2 3 4 5
1
7
8
9
10
1. Flashlight
2. Flashlight button: Press briey to ash light. Press and hold for 5 seconds to
keep the light on
3. SOS button: Flashlight sends S-O-S message in Morse Code
4. Hazard button: Hazard indicators (front and back) ash on and o
5. Rotary Hand Crank: To manually charge the interior battery
6. Integrated hands-free mic.: Speakerphone Mic.when paired to phone
7. Bottle Opener
8. LED Flood Light Power button
9. LED Flood Light
10. Solar Panel: Charges interior battery from strong sunlight
6
5.
CONTROL PANEL
.
4. Radio button
Press to toggle through the radio bands (FM/ AM/ SW/ WX)
5. Menu button
Press to toggle through menu options
6. Select button
Used to select items for adjustment in Menus
7. Power button/LED
Press: Enable/Disable USB charging output
Green: 80 - 100% charge
Orange: 10-80% charge
Flashing Red: <10% charge (charge needed)
8. Radio Presets (1-5): In FM/AM or SW modes press and hold one of the
numbered buttons to save a radio station.
9. Previous Track/Scan button: Press to go to the Previous track. Press and hold
to scan to the Previous radio station.
10. Next Track/Scan button: Press to go to the next track. Press and hold to scan
to the next radio station.
11. Volume up/Menu up: Press to increase the volume. In Menu mode, press
to toggle through Menu options.
12. Volume down/Menu down: Press to decrease the volume.In Menu mode,
press to toggle through Menu options.
1. Local Weather and Area Alert button/LED
Press: Review alerts
Press and hold: Alert Function On/O
Green: Alerts Enabled
Yellow: ‘Advisory’ Level Alert Received
Orange: ‘Watch’ Level Alert Received
Red: ‘Warning’ Level Alert Received
2. Power button
Press: Standby/On
Press and hold: Full O
3. Bluetooth / AUX button
Press Briey: Bluetooth on (also acts as play/pause in BT mode)
Press and hold: Drop connection and pair a new device
When in BT mode and paired with a phone press briey to answer/hang up a call,
press and hold to reject an incoming call
Press to select Aux when an Auxiliary lead is plugged into the rear
9
10
11
12
21 3 4 5 6 7
8
/AUX
MENU OPERATION
SET TIME
(Hours) (Minutes)
SET ALARM 1
88:88 (Hours)
88:88 (Minutes) ON/OFF, RADIO/BUZZER, VOLUME
SET WEATHER CHANNEL
SET LOCATION
ALL / MULTI / SINGLE
ALERT DISPLAY
FULL BROADCAST / SIREN NO CAST / CAST NO SIREN / STROBE / DISPLAY ONLY
SELECT EVENTS
DEFAULT/ MAJOR ONLY/ ALL/ USER
SET LANGUAGE
ENGLISH / ESPANOL / FRANCAISE
BACKLIGHT
ON BRIGHT / ON DIM / OFF / ALERT ONLY
ALERT TEST/ VOL
TREBLE/BASS
TREBLE / BASS (±5dB)
RESET
SURE Y/N
SET ALARM 2
88:88 (Hours)
88:88 (Minutes) ON/OFF, RADIO/BUZZER, VOLUME
6.
Menu Pages and Options
Ch.# Frequency
1 162.400 MHz
2 162.425 MHz
3 162.450 MHz
4 162.475 MHz
5 162.500 MHz
6 162.525 MHz
7 162.550 MHz
Press
MENU
to access top level menus.
Repeatedly press the
MENU
button or use the
+
and
-
buttons at the top
level to change to next available menu.
Press
SELECT
to enter that menu.
Press
|<
and
>|
buttons to move forward/back selecting items to be changed.
Press
+
and
-
buttons to change the parameters of the selected item.
MENU OPERATION (CONT.)
7.
Setting the Time
1.
Press the Menu button until SET TIME appears on the display. Pressing Menu
will move to the next menu, pressing +or –will also move back and forward to the
next menu.
2. Press the Select button to edit the clock’s time. Press the
+
and
-
buttons to
change the hour. AM and PM is set by changing the time. (the hour number will
be ashing when being set)
3.
Press the Select or >| button to select and edit the minutes. Use the
+
and
-
buttons
to change the time. (the minutes number will be ashing when being set)
Setting the Alarms (Alarm 1 and 2)
1. Press the Menu button until SET ALARM 1(or 2 )appears on the display .
2. Press the Select or >| button to edit the alarm time. Use the +and -buttons to
change the hour. AM and PM is set by changing the time. (the hour number will
be ashing when being set)
3. Press the Select or >| button to select and edit the minutes. Use the +and -
buttons to change the time. (the minutes number will be ashing when being set)
4. Press the Select or >| button to select the ON/OFF setting. Press the +or -
button to turn the alarm ON/OFF (a clock will appear with 1 (or 2) next to it
when ON).
5. Press the >| button to change to the next menu. Press the +or -button to
choose between Buzzer (Alarm sound) or Radio. The ‘R’symbol lights up if
radio is selected for wakeup.
6. Press the >| button to change the alarm volume. Press the + or - button to
increase or decrease the volume of the alarm.
7. Press Select or >| to save the alarm and exit the menu.
4. Press Select or >| to save the hour and move to minutes.
5. Press Select or >| to save the time and exit the menu.
Setting up weather alerts
For the US there are two ways to nd the frequency used by the local transmitter for your area.
Option 1
Find your local station via the listing at
Click on your state, nd your area and note the stations call-sign and its frequency.
Option 2
Search at
Enter the name of your area or state, and click on the icon displayed on the map for
information and details about the transmitter.
For Canada nd your local station via the interactive map at:
Setting the Weather Channel
(the frequency used by the local transmitter for your area)
https://www.weather.gov/nwr/station_listing
https://www.weather.gov/nwr/coverage/station_search.php
https://www.canada.ca/en/environment-climate-change/services/weatheradio/nd-
your-network.html
1.
Press the Menu button until
SET WEATHER CHANNEL
appears on the display.
2.
Press SELECT or >| to enter the menu, then press the +and -buttons to nd the
desired weather channel (frequency).
3. Press SELECT or >| to save the channel and exit the menus .
The frequency set above will also be the frequency the radio tunes to if you choose
to listen to WX (Weather) RADIO via the RADIO button.
NOTE: When you exit this menu option, the Radio Alert function will automatically
turn On. Press the Alert ON/OFF button to turn the Radio Alert function on/o.
The Storm Chaser can receive and decode Specic Area Message Encoding (SAME)
Alerts which are displayed as text on the display.
To do this you need to tell the unit the Location/s you want alerts for. If you select All
from USA or Canada you will received all alerts generated in that country. If you want
to set either a list of specic areas (Multi) or just your single local area (Single) then you
need to enter the special SAME code for your areas.
For USA nd the SAME codes for your area via the listing at
note down the SAME numbers you are interested in.
For Canada nd the SAME codes via the interactive map at
1. Press the Menu button until
Set Location
appears on the display .
2.
Press SELECT or >| to enter the menu, then press the +or –buttons to choose
between ALL (all alerts from either USA or CANADA), MULTI (multiple i.e. set your
own list of multiple states/countys in USA or CANADA) and SINGLE (set to one
state/ county in USA or CANADA)
• If
MULTI
is selected then you will be asked to input a list of your preferred locations
(up to 10 locations).
Press the
+
and
-
buttons to choose between the USA and Canada, then press SELECT
or >| buttons to move to the next step.
Press the
+
and
-
buttons to choose the position in the list (will initially be ‘01’) and
press SELECT or
>|
.
Press the
+
or
–
buttons to set the rst digit. Press
>|
to move to the next digit press |<
to move back one digit.
Pressing >| after the last digit moves to the next list item. Press the +or –buttons to
choose the next position in the list you want to edit.
Once you have entered all locations press Menu to save and exit the menu.
• If
SINGLE
is selected then you will be asked to input one specic location in the
same way as above.
https://www.canada.ca/en/
environment-climate-change/services/weatheradio/specic-area-message-encoding/forecast-regions.html
https://www.weather.gov/nwr/
counties
Setting your Location (the area/s you are interested in for SAME alerts)
Choosing Alert Display (How an Alert is displayed or presented)
1. Press the Menu button until ALERT DISPLAY appears on the display .
2. Press the Select or >| button to enter the menu .
3.
Press the +and –buttons to toggle through the following 4 options, then press SELECT.
4. Press Select or >| to save the desired option and exit the menu.
FULL BROADCAST –The speaker will make an alert sound and ash the Hazard
and Alert Button LEDs for eight seconds. This is followed by the weather/alert
broadcast audio (if transmitted) and the display will show the alert text.
SIREN NO CAST – Siren but no broadcast audio - The speaker will make an alert
sound and ash the Hazard and Alert Button LEDs for eight seconds. The display
screen will show the alert text. There will be no weather/alert broadcast audio.
CAST NO SIREN – Broadcast audio but no siren - The speaker will not make an
alert sound but will ash the Hazard and Alert Button LEDs for eight seconds. This
is followed by the weather/alert broadcast audio (if transmitted) and the display will
show the alert text.
STROBE –
Lights only, no broadcast audio or siren - The speaker will not make an
alert sound but will ash the Hazard and Alert Button LEDs for eight seconds. There
will be no weather/alert broadcast audio but the display will show the alert text.
DISPLAY ONLY – No Hazard lights or audio - The speaker will show the alert text
only, the Alert button will still ash to indicate the level of alert and that an alert
has been received.
Note: The Alert function must be enabled for Alerts to be received.
(Press and hold the Alert button to enable/disable alerts)
When there is an alert, the Alert button will illuminate according to the level or Alert:
Green – Alert reception is on, nothing has been received, or all alerts timed out
Flashing Red – Warning
Flashing Orange - Watch
Flashing Yellow - Advisory
Note: The Alert button always indicates the last active alert received.
To review alerts after they have been received press the Alert button briefly.
The last active alert will be shown on the display, its level is shown by the
color of the button.
Use the + and - or |< and >| buttons to step through up to 10 active alerts if
more than one is currently active.
NOAA alerts are transmitted with a timeouts from 15 minutes to 6 hours. When
all active Alerts have timed out the button will return to green.
Setting Events (The type of event you want to be alerted about)
Alerts are categorised as Advisory, Watch and Warning and then by type of event such
as Flood Watch or Tornado Warning etc.
For the full list of events the Storm Chaser can receive in the modes set below
see page 11
.
1. Press the Menu button until ALERT EVENTS appears on the display.
2. Press the Select or >| button to enter the menu.
3. Press the +and –buttons to toggle through the following 4 options, then press SELECT.
4. Press Select or >| to save the desired option and exit the menu.
Setting the Language
1. Press the Menu button until
SET LANGUAGE
appears on the display.
2. Press the Select or >| button to enter the menu.
3. Press the +and – buttons to toggle through the following 3 options; English,
Espanol, or Francaise then press SELECT.
4. Press Select or >| to save the desired option and exit the menu.
1. Press the Menu button until
BACKLIGHT
appears on the display.
2. Press the Select or >| button to enter the menu
3.Press the +and –buttons to select between On Bright, On Dim, Alert Only (only
comes on when displaying alert text), and O.
4. Press Select or >| to save the desired option and exit the menu
Testing/Setting the Alert Siren Volume
1.
Press the Menu button repeatedly until ALERT TEST/VOL appears on the display.
2. Press the Select or >| button to enter the menu, the Alert will sound.
3. Press the +and -buttons to increase or decrease the volume of the alert sound.
4. Press Select or >| to save the volume level (which will be used for next alert) and
exit the menu .
Setting TREBLE/ BASS
1. Press the Menu button until
TREBLE/BASS
appears on the display.
2. Press the Select or >| button to enter the menu.
3. Press the +and –buttons to adjust the treble.
4. Press the >| button to move to the next setting.
5. Press the +and –buttons to adjust the bass.
6. Press SELECT or >| to save the adjustment and exit the menus .
Reset Settings
Note this resets all settings including radio presets, NOAA/SAME frequency, location etc.
1. Press the Menu button until
RESET
appears on the display.
2. Press SELECT or >| to enter the menu.
3. Press Select again when the display is showing SURE Y/N to reset all settings unit
will go back to all factory defaults
Setting Backlight Brightness
ALL
- Enables all alerts including test alerts
DEFAULT
- Enables all alerts except some advisory level test alerts
MAJOR
- Enables a xed list of all important alerts (see page 11).
USER
- Allows the user to set their preference. Various major alerts cannot be disabled
as these are crucial to the operation of the NOAA/SAME service. (see page 11).
Inhaltsverzeichnis
Andere Altec Lansing Sprecher Handbücher
Altec Lansing
Altec Lansing EXPRESSIONIST CLASSIC - Bedienungsanleitung
Altec Lansing
Altec Lansing 307 CEILING SPEAKERS Bedienungsanleitung
Altec Lansing
Altec Lansing 515-G Bedienungsanleitung
Altec Lansing
Altec Lansing VS2120 Bedienungsanleitung
Altec Lansing
Altec Lansing M500 Bedienungsanleitung
Altec Lansing
Altec Lansing 4156-8A LF SPEAKER Benutzerhandbuch
Altec Lansing
Altec Lansing XT2 Bedienungsanleitung
Altec Lansing
Altec Lansing Duplex DTS645-8AF Bedienungsanleitung
Altec Lansing
Altec Lansing 19 HI FI SPEAKER Bedienungsanleitung
Altec Lansing
Altec Lansing MINI LIFEJACKET 2 Bedienungsanleitung
Altec Lansing
Altec Lansing Shockwave 200 Bedienungsanleitung
Altec Lansing
Altec Lansing 615A CEILING SPEAKERS Bedienungsanleitung
Altec Lansing
Altec Lansing 807-8A HF DRIVER Bedienungsanleitung
Altec Lansing
Altec Lansing 409B CEILING SPEAKER Bedienungsanleitung
Altec Lansing
Altec Lansing IML 237 Bedienungsanleitung
Altec Lansing
Altec Lansing VS2620 Bedienungsanleitung
Altec Lansing
Altec Lansing 8254-LF LF SPEAKER SYSTEM Bedienungsanleitung
Altec Lansing
Altec Lansing Shockwave Bedienungsanleitung
Altec Lansing
Altec Lansing 909-16A HF DRIVERS Benutzerhandbuch
Altec Lansing
Altec Lansing DUAL MOTION IMW140 Bedienungsanleitung
Beliebte Sprecher Handbücher anderer Marken
Bowers & Wilkins
Bowers & Wilkins 4 Bedienungsanleitung
Sonance
Sonance SONOS OUTDOOR Series Bedienungsanleitung
Electro-Voice
Electro-Voice EVID FM4.2 Bedienungsanleitung
Pioneer
Pioneer XW-HTD630 Bedienungsanleitung
Onn
Onn BWA16AA002 Bedienungsanleitung
HP
HP GL313AA - USB Speakers PC Multimedia Bedienungsanleitung