Altec Lansing SHOCKWAVE 100 Bedienungsanleitung
Quick Start Guide
Item: IMT7001
Quick Start Guide
IMT7001
IMT7001 Wireless
Party Speaker
Adapter
AUX. Audio cable
Wired Mic.x1
AUX:To connect devices via auxiliary
cable
USB OUT: For charging mobile devices
DC IN: Power adapter port
MIC2: For 2nd wired microphone
MIC1: For 1st wired microphone
INPUT/OUTPUT PORTS
Play/Pause
Previous song/
change FM station
Next song/change
FM station
Adjust Bass level
Press and hold for 3 seconds to
turn speaker ON and OFF
FM and AUX modes
Bluetooth/Stero
Pairing mode
Light mode
Adjust speaker volume
Brief introduction to buttons on top panel
Press MIC volume buttons to
increase or decrease the volume of
each microphone
MIC Volume Control
：Power Button:
(BT mode only)
Hold: FM Scan
ALShockwave 100
BLUETOOTH CONNECTION
Stereo pairing (requires two speakers) :
1. Have one speaker turned on, paired, and playing music. It will serve as the
HOST (the Primary speaker). The display will be showing ‘Bt’. (Pair by pressing the
BT/PAIR button, ‘Bt’ flashes on the display screen and becomes solid when pairing
is complete.
2. Turn on an additional compatible speaker, it will serve as the Secondary
speaker.
3. Press and hold the BT/PAIR button on the Primary speaker for approximately
two seconds or until the display changes from solid ‘Bt’ to flashing ‘HOSt’.
4. Quickly press the BT/PAIRbutton on the Secondaryspeaker. The display will change
from flashing ‘Bt’ to flashing ‘St PAIr’ (stereo pairing).
5. The speakers will connect and both displays will show ‘Bt’. The speakers
will now play the same music from the same audio source, one will play Left and
one will play Right.
Go to the Bluetooth settings page on your phone. Make sure Bluetooth
is on before connecting to the available device “AL Shockwave 100”.
Primary Speaker Secondary Speaker
LIGHTING CONTROL
Lights
(Noted: Cone’s light will be displayed while unit is playing music)
Briefly press the LIGHTS button for lighting control:
LED 1: Side lights scrolling multi-color, cones color change with the beat;
press and hold to change as single color scrolls one by one.
Side lighting one colore, cones follow music to flash the same color;
press and hold for 3 seconds to change color.
L267 x W238 x H504 (mm)
15V 1.5A
LED 2: Sides and cones follow music and change color automatically every 3
seconds.
LED 3:
LED 4: Sides o and cones flash into one color; press and hold for 3 seconds
to change color.
LED 5: Sides do a bar graph from the middle in one color and cones flash the
same color; press and hold for 3 seconds to change color.
LED 6: Sides and cones slowly change colors automatically every 3 seconds;
press and hold to turn the cone lights o.
LED 7: Sides flash one color and cones are o. Press and hold for 3 seconds
to change color.
LED 8: Sides do a multi-color bar graph from the middle and cones flash.
Sides fade between colors and cones are o.
Lighting o.
LED 9:
OFF:
Power Audio: 43W (RMS) 150W (Peak) Total
Driver Units: 5.25” x 2+2” x 1
Seperation: ≥40dB
S/N: ≥70dB
Distortion: ≤o.5% (1K, 1W)
DC Input:
Dimension:
Length of adaptor: 110cm
Length of Audio cable(stereo-to-stereo): 90cm
Length of wired micphone’s cable: 285cm
Call us 24/7 at 1-855-292-4087 or
or visit us at alteclansing.com
Having Trouble?
We’re here to help!
Supplier's Declaration of Conformity
47 CFR § 2.1077 Compliance Information
Trade Name: Altec Lansing
Unique Identifier
Model No.: IMT7001
Responsible Party – U.S. Contact Information
US Company Name: SAKAR INTERNATIONAL INC.
Address: Edison, NJ 08817
Telephone number or internet contact information: 855-292-4087
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated
with minimum distance 20cm between the radiator and your body.
RF Exposure Compliance
IMPORTANT SAFETYINSTRUCTIONS
1. Read these instructions – All the safety and operating instructions should be
read before this product is operated.
2.Keep these instructions – The safety and operating instructions should be
retained for future reference.
3.Heed all warnings – All warnings on the appliance and in the operating
instructions should be adhered to.
4.
Follow all instructions – All operating and use instructions should be followed.
5.Do not use this speaker near water or in moist environments. Do not put
this product on wet surfaces.
6.Clean only with dry cloth.
7.Do not block any ventilation openings. Install in accordance with the
manufacture’s instructions.
8.
Do not install near any heat sources such as radiators, heat registers, stoves,
or other apparatus (including amplifiers) that produce heat.
9.
Do not defeat the safety purpose of the polarized or grounding plug. A polarized
plug has two blades with one wider than the other. A grounding plug has two
blades and a third grounding prong. The wide blade or the third prong is
provided for your safety. If the provided plug does not fit into your outlet,
consult an electrician for replacement of the obsolete outlet.
10.Protect the power cord from being walked on or pinched particularly at the
plugs, convenience receptacles, and at the point where they exit from the apparatus.
11.Only use attachments/accessories specified by the manufacturer.
12.Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart or rack is used, use
caution when moving the cart/apparatus combination to avoid injury from tip-over.
13.Unplug the apparatus during lightning storms or when unused for long
periods of time.
14.Refer all servicing to qualified personnel. Servicing is required when the
apparatus has been damaged in any way, such as power supply cord or plug
is damaged, liquid has been spilled or objects have fallen into the apparatus
has been exposed to rain or moisture, does not operate normally, or has been
dropped.
15.CAUTION: These servicing instructions are for use by qualified service
personnel only. To reduce the risk of electric shock, do not perform any servicing
other than that contained in the operating instructions unless you are qualified
to do so.
16.WARNING：To reduce the risk of fire or electric shock, do not expose this
apparatus to rain or moisture. The apparatus shall not be exposed to dripping
or splashing and that objects filled with liquids, such as vases, shall not be
placed on apparatus.
17.
WARNING：For the terminals marked with symbol of “ ” may be of sufficient
magnitude to constitute a risk of electric shock. The external wiring connected
to the terminals requires installation by an instructed person or the used of
ready-made leads or cords.
18. This equipment is a Class II or double insulated electrical appliance. It
has been designed in such a way that it does not require a safety connection
to electrical earth.
Andere Handbücher für SHOCKWAVE 100
2
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Altec Lansing Sprecher Handbücher
Altec Lansing
Altec Lansing DUAL MOTION IMW140 Bedienungsanleitung
Altec Lansing
Altec Lansing 409 E CEILING SPEAKERS Bedienungsanleitung
Altec Lansing
Altec Lansing 401B CEILING SPEAKER Bedienungsanleitung
Altec Lansing
Altec Lansing 4048A SIGNAL PROCESSING Bedienungsanleitung
Altec Lansing
Altec Lansing 932-8B SPEAKER SYSTEM Bedienungsanleitung
Altec Lansing
Altec Lansing 409-8E Bedienungsanleitung
Altec Lansing
Altec Lansing DTS945A-F SPEAKER SYSTEM Bedienungsanleitung
Altec Lansing
Altec Lansing 75-BK SPEAKER SYSTEM Bedienungsanleitung
Altec Lansing
Altec Lansing Cone 405A Bedienungsanleitung
Altec Lansing
Altec Lansing VS2620 Bedienungsanleitung
Altec Lansing
Altec Lansing XM3120 Bedienungsanleitung
Altec Lansing
Altec Lansing Orbit-MP3 Bedienungsanleitung
Altec Lansing
Altec Lansing inMotion SoundBlade Bedienungsanleitung
Altec Lansing
Altec Lansing 3124 Bedienungsanleitung
Altec Lansing
Altec Lansing 515B LF SPEAKER Bedienungsanleitung
Altec Lansing
Altec Lansing 407 CEILING SPEAKERS Bedienungsanleitung
Altec Lansing
Altec Lansing 205 CEILING SPEAKER Bedienungsanleitung
Altec Lansing
Altec Lansing ORBIT-MP3 - QUICK CONNECT CARD Bedienungsanleitung
Altec Lansing
Altec Lansing 95-BK SPEAKER SYSTEM Bedienungsanleitung
Altec Lansing
Altec Lansing M500 Bedienungsanleitung
Beliebte Sprecher Handbücher anderer Marken
Bowers & Wilkins
Bowers & Wilkins 4 Bedienungsanleitung
Sonance
Sonance SONOS OUTDOOR Series Bedienungsanleitung
Electro-Voice
Electro-Voice EVID FM4.2 Bedienungsanleitung
Pioneer
Pioneer XW-HTD630 Bedienungsanleitung
Onn
Onn BWA16AA002 Bedienungsanleitung
HP
HP GL313AA - USB Speakers PC Multimedia Bedienungsanleitung