AMERICAN SANDERS TECHNOLOGY Classic 8 Operator's Manual Page 3
DANGERmeans: Severe bodily injury or death can occur to you or other personnel if the DAN-
GER statements found on this machine or in this Owner's Manual are ignored
or are not adhered to. Read and observe all DANGER statements found in
thisOwner'sManual and onyour machine.
WARNINGmeans: Injury can occur to you or to other personnel if the WARNING statements
foundon yourmachine or in this Owner'sManual are ignored or arenot
adheredto. Read andobserve all WARNING statements found in this Owner's
Manualandonyourmachine.
CAUTIONmeans: Damage can occur to the machine or to other property if the CAUTION
statementsfound on your machine or in this Owner'sManual are ignoredor are
not adhered to. Read and observe all CAUTION statements found in this
Owner'sManualandonyourmachine.
DANGER: Readtheoperator'smanual beforeservicingoroperating thismachine. Themanual
contains information essential to the safe and reliable use of this machine.
DANGER: Sanding/finishing wood floors can create conditions that could produce a fire or explosion.
Followtheseprecautions:
• Do not sand over exposed nails. The grindings may enter the dust bag and ignite the
contents. Set all exposed nails before sanding.
• Do not sand over sanding abrasive particles or embedded stones. The grindings may
enter the dust bag and ignite the contents. Remove particles or stones before sanding.
• Do not leave wood dust in bag. The contents may spontaneously ignite or explode.
Disposein ametal containerclear ofany combustibles. Donot dispose in a fire.
• Donot use thismachine with ornear flammable fuelsor agents. Readthe manufacturer's
label on all chemicals to determine flammability. Vapors or airborne wood dust can
createanexplosiveenvironment. Openflames,electricalsparksorothersourcesof
ignition should be extinguish or avoided. Do not over fill the dust bag. Ventilate the work
area.
• Do not operate the machine on an electrical circuit that repeatedly trips or blows the
fuse. The circuit may be undersized or faulty which could cause an electrical fire.
DANGER: This machine operate on electric power. The power is sufficient to cause shock or
electrocution. Followthese precautions:
• Do not connect the machine to an electrical circuit that has no grounding conductor.
Thegrounding conductor will drain the power fromthe machine,should itbecome
electrified. Consult an electrician if the grounding conductor is missing or you suspect
thecircuit has no groundingconductor. Do not remove or disable the grounding conduc-
tor on the electrical cord. For added protection, use machine on a circuit equipped with
agroundfaultcircuit interrupter.
• Do not service the machine while connected to an electrical circuit. Doing so might
result in contact with electrical components.
• Do not use the machine with a damaged electrical cord. Inspect the cord for damage to
the jacket and connector(s) before connecting the machine to an electrical circuit. Do
not use the cord to move the machine. Keep the cord clear of the sanding drum. Lift
the cord over the machine when moving it from one side to the other.
• Do not expose this machine to rain or moisture. Damage to electrical components may
occur. Store in a dry building.
WARNING AVERTISSEMENT ADVERTENCIA
OPERATOR SAFETY INSTRUCTIONS
