Alto Elvis Series Bedienungsanleitung

ELVIS Series

User's Manual

LTO

www.altoproaudio.com

Version 1.3 March 2005

English

SAFETY INSTRUCTIONS

1. Read Instructions

All the safety and operation instructions should be read before using the product and retain them for future reference.

2. Water & Moisture

This product should not be used near water and will be protect from atmospheric agents in fixed or temporary installations.

3. Heat

This product should be situated away from heat sources such as radiators, or other devices which produce heat.

4. Liquid Entry

Care should be taken so that liquids are not spilled into the product and that objects do not fall on.

5. Service Assistance

This product should be serviced only by qualified service personnel when :

a. Liquids has spilled or objects have fallen into this product, or

b. This product has been exposed to rain, or

c. This product does not appear to operate normally or exhibits change in performance, or been dropped or itshas

cabinet / chassis damaged.

6. Package

The package of this product has been tested, inspect the package before open, if any damage is found, notify to

your dealer.

7. Hearing

This product produce high acoustic levels may cause permanent hearing loss, (SPL in for a defined period of time).

8. Installations

This product should be installed on the wall or in the floor with specific stands, according to the max weight.

"Electric discharge"

This symbol, alert you to the presence of uninsulated dangerous voltage inside the product which constitutes aenclosure,

risk of electric shock.

"Exclamatory point"

This symbol, alert the user to the presence of important operating and maintenance instructions the owner's manualin

included to the product.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

TABLE OF CONTENT

4. WIRE CONNECTIONS .........................................................................................................................10

1. QUICK START - PASSIVE SPEAKER CABINET....................................................................................3

-. For Passive Full-range Speakers

-. For Passive Subwoofer & Satellite Speakers

2. QUICK START - ACTIVE SPEAKER CABINET.....................................................................................5

-. For Active Full-range Speakers

-. For Active Subwoofer & Satellite Speakers

3. CONNECTION PLATE ................................................................................. ..........................................7

-. PASSIVE FULL-RANGE Speaker for ELVIS10/ELVIS12/ELVIS15/ELVIS12M/ELVIS15M

-. PASSIVE SUBWOOFER Speaker for ELVIS12S/ELVIS15S

-. Active FULL-RANGE Speaker for ELVIS10A/ELVIS12/AELVIS15A/ELVIS12MA/ELVIS15MA

-. Active SUBWOOFER Speaker for ELVIS12SA/ELVIS15SA

5. ELVIS TECHNICAL SPECIFICATIONS.................................................................................................11

-. For Passive Speaker Cabinets

-. For Active Speaker Cabinets

1. QUICK START - PASSIVE SPEAKER CABINET

-. For Passive Full-range Speakers

QUICK START

Elvis Passive Full-range Speakers

Stereo

Power Amplifier

speaker cable

Tripod

Mount

Left

Main Mix

Output

Right

Main Mix

Output

Mixer

Tripod

Mount

3). Turn on your mixer first, then the stereo power amplifier.

4). Turn up the volume controls of your amplifier to about 70%.

2). Complete other connections as illustrated.

Make all initial connections with all the equipment powered off, and ensure that all the main volume controls are turned completely

down.

1). Connect one side of the speaker cable to the Output CHA/CHB or Binding Post of your stereo power amplifier

and the other side to the Input socket of your speaker cabinet.

5). Use PFL function to get the proper input level for the mixer, and adjust the Main Mix Level control to manipulate the output

level.

6). After using, turn off your stereo power amplifier first, then the mixer.

speaker cable

-. For Passive Subwoofer & Satellite Speakers

1). Connect one side of speaker cable to the Output CHA/CHB or Binding Post of your stereo power amplifier and the other

side to the Input socket of your subwoofer, with the second speaker cable connect the Output of the subwoofer to the

Input of satellite.

Speaker Cable

pole

Mount

Speaker Cable

pole

Mount

Stereo

Power Amplifier

Left

Main Mix

Output

Right

Main Mix

Output

Mixer

QUICK START

ELVIS Passive Subwoofer & Satellite Speakers

Speaker Cable

3). Turn on your mixer first, then the stereo power amplifier.

4). Turn up the volume controls of your amplifier to about 70%.

2). Complete other connections as illustrated.

5). Use PFL function to get the proper input level for the mixer, and adjust the Main Mix Level control to manipulate the output

level.

6). After using, turn off your stereo power amplifier first, then the mixer.

-. For Active Subwoofer & Satellite Speakers

1). Connect one side of signal cable at your audio mixer in to Output Left /Right (with Stereo-Jack or XLR) and the other

side of the cable in to the Left / Mono Input (COMBO) of the active subwoofer; with the second signal cable connect

the Left Output of the subwoofer (Stereo/Mono-Jack or XLR) to the Line Input (COMBO) of the active satellite (with

Stereo - Jack or XLR).

Tripod

Mount

Tripod

Mount

Left

Main Mix

Output

Right

Main Mix

Output

QUICK START

Elvis Active Subwoofer & Satellite Speakers

Signal Cable

Power Cord

3). Turn on your mixer first, then the active speaker cabinets.

2). Connect the power cord to mains.

5). Use PFL function to get the proper input level for the mixer, and adjust the Main Mix Level control to manipulate the

output level.

4). Turn up the volume control fo the active speaker cabinets.

6). After using, turn off your active speaker cabinets first, then the mixer.

3. CONNECTION PLATE

- PASSIVE FULL-RANGE Speaker for ELVIS10 / ELVIS12 / ELVIS15 / ELVIS12M/ELVIS15M

(1) INPUT: Receive the power coming from an external power amplifier (SPK +1/-1 connected; +2/-2 not connected).

(2) THRU: Direct LINK for connect in parallel a second speaker cabinet (SPK +1/-1 connected; +2/-2 not connected).

INPUT THRU

LINK

LTO

ELVIS 12

SOUND REINFORCEMENT SPEAKER SYSTEM

DESIGNED AND DEVELOPMENT IN ITALY

Power Handling:

AES-180Watts

PEAK - 360 Watts

IMPEDANCE:

8 ohms nominal

SERIAL

MODEL

(1) (2)

- PASSIVE SUBWOOFER Speaker for ELVIS12S / ELVIS15S

(1) INPUT: Receive the power (SPK +1/-1 connected;+2/-2 not connected).coming from an external amplifier

(2) OUTPUT: Power output for satellite speaker, under passive crossover filtered at 125Hz (SPK +1/-1 connected;

+2/-2 not connected).

INPUT OUTPUT

LTO

ELVIS 12S

DESIGNED AND DEVELOPMENT IN ITALY

POWER HANDLING:

AES-200Watts

PEAK - 400 Watts

IMPEDANCE:

4 ohms nominal

SERIAL

MODEL

(1) (2)

-. ACTIVE FULL- RANGE Speaker for ELVIS10A / ELVIS12A / ELVIS15A / ELVIS12MA/ELVIS15MA

(1) Bi-polar main power switch.

(2) Input AC power socket with main fuse.

(3) Ground Swicth.

(4) POWER, blue LED, indicate ON status.

(5) SIGN / COMP, signal/compressor, green/red LED

(6) LINE OUT at + 4dB on XLR connector

(7) LINE IN at + 4dB on COMBO connector.

(8) VOLUME main power amplifier control.

(9) LOW / MID / HIGH, EQ tone control at +/- 6dB.

(10) GAIN control for microphone -10/- 45dB.

(11) MIC IN on balanced XLR, for microphone.

(1)(2)

(3)

(4)

(5)

(6)

(7)

(8)

(9)

(10)

(11)

MIC IN

LINE-IN

OFF

AC INPUT: 230V~ 50Hz GND

POWER

MIC GAIN

-10dB -45dB

VOLUME

+4dBu

LOW

HIGH

-6dB +6dB

MIDDLE

-6dB +6dB

SIGN

COMP

SERIAL

MODEL

LINE-OUT

PUSH

NEW TIDE

-. ACTIVE SUBWOOFER Speaker for ELVIS12 SA / ELVIS15 SA

(1) Bi-polar main power switch.

(2) Input AC power socket with main fuse.

(3) Ground Swicth.

(4) POWER, blue LED, indicate ON status.

(5) SIGN / COMP, signal/compressor, green/red LED

(6)

(7)

(8) VOLUME main power amplifier control.

(9)

(10)

LEFT signal output on XLR or Jack connector for active satellite, under electronic crossover at 125Hz.

RIGHT on XLR connector for active satellite, under electronic crossover at 125Hz.

RIGHT, input signal on XLR connector.

LEFT/MONO, input signal on COMBO connector.

GND

OFF

AC INPUT: 230V~ 50Hz

RIGHT

LEFT/

MONO

RIGHT

LEFT/

MONO

LINK

OUT

VOLUME

+4dBu

SIGN

COMP

SERIAL

MODEL

POWER

(1)(2)

(3)

(4)

(5)

(7)

(6)

(8)

(9)

(10)

Use only with a 250V fuse

PUSH

NEW TIDE

PUSH

NEW TIDE

Andere Handbücher für Elvis Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Alto Sprecher Handbücher

Alto

Alto ts115a truesonic Bedienungsanleitung

Alto

Alto AMX 180FX-USB Bedienungsanleitung

Alto

Alto MICRO3 Bedienungsanleitung

Alto

Alto TX8 Bedienungsanleitung

Alto

Alto PS4 Bedienungsanleitung

Alto

Alto ACTIVE-8 Bedienungsanleitung

Alto

Alto PS 5L Bedienungsanleitung

Alto

Alto ELVIS 15.2XL Bedienungsanleitung

Alto

Alto PAM5 Bedienungsanleitung

Alto

Alto OEX900 Bedienungsanleitung

Alto

Alto ELVIS SPEAKER Bedienungsanleitung

Alto

Alto Elvis Series Bedienungsanleitung

Alto

Alto SR500A Bedienungsanleitung

Alto

Alto MIXPACK 10 Bedienungsanleitung

Alto

Alto TSL115 Bedienungsanleitung

Alto

Alto TX15 Bedienungsanleitung

Alto

Alto PS Series Bedienungsanleitung

Alto

Alto ELVIS 12 MKII Bedienungsanleitung

Alto

Alto TOURMAX SX115 Bedienungsanleitung

Alto

Alto BLACK 15SUB Bedienungsanleitung

Alto

Alto MS8 Bedienungsanleitung

Alto

Alto IPA Music System Bedienungsanleitung

Alto

Alto ELVIS SPEAKER Bedienungsanleitung

Alto

Alto TS112W Bedienungsanleitung

Beliebte Sprecher Handbücher anderer Marken

argon audio

argon audio IE20 Bedienungsanleitung

Denon

Denon SC-N7 Bedienungsanleitung

Gemline

Gemline Ace 3952 Bedienungsanleitung

Focal

Focal ON WALL 300 Bedienungsanleitung

HEADRUSH

HEADRUSH Maximus HRSP 5024 Bedienungsanleitung

SoundLogic

SoundLogic BCCS-6/6395 Bedienungsanleitung

Peavey

Peavey DTH 218 Bedienungsanleitung

Avantree

Avantree Pluto Air Bedienungsanleitung

Morel

Morel Integra Series INTEGRA OVATION 4 Bedienungsanleitung

Oppo

Oppo SONICA Bedienungsanleitung

Bose

Bose SoundLink Wireless Music System Bedienungsanleitung

Rocksteady

Rocksteady Stadium Bedienungsanleitung

Bowers & Wilkins

Bowers & Wilkins 4 Bedienungsanleitung

Sonance

Sonance SONOS OUTDOOR Series Bedienungsanleitung

Electro-Voice

Electro-Voice EVID FM4.2 Bedienungsanleitung

Pioneer

Pioneer XW-HTD630 Bedienungsanleitung

Onn

Onn BWA16AA002 Bedienungsanleitung

HP GL313AA - USB Speakers PC Multimedia Bedienungsanleitung