Alto TX10 Bedienungsanleitung

User Guide (English)

Introduction

Box Contents

TX10 User Guide

Power Cable Safety & Warranty Manual

Support

For the latest information about this product (system requirements, compatibility information,

etc.) and product registration, visit altoprofessional.com/tx10.

For additional product support, visit altoprofessional.com/support.

Important Safety Precautions

Please note: Alto Professional and inMusic are not responsible for the use of its products or

the misuse of this information for any purpose. Alto Professional and inMusic are not

responsible for the misuse of its products caused by avoiding compliance with inspection and

maintenance procedures. Please also refer to the included safety and warranty manual for

more information.

Important: Do not suspend a TX Series loudspeaker. It is not designed for suspended

applications. We recommend our Truesonic Series or Black Series loudspeakers for

suspended applications instead.

Stand-Mounting

• Always install loudspeakers in accordance with applicable electrical and building codes.

• Install the loudspeaker according to its maximum weight. Check the specifications of your

stand or pole to ensure it can support the loudspeaker's weight. Also, observe all safety

precautions specified by the manufacturer.

• Do not mount multiple loudspeakers on the same stand or pole.

• Always verify that the stand or pole is on a flat, level, and stable surface. Also, fully extend

the legs of tripod-style stands, and ensure its legs do not present a trip hazard.

• Inspect the stand (or pole and associated hardware) before each use and do not use

equipment with worn, damaged, or missing parts.

• Always be cautious in windy, outdoor conditions. You may need to place additional weight

(e.g., sandbags) on stand's base to improve stability. Do not attach banners or similar

items to any part of a loudspeaker system. Such attachments could act as a sail and

topple the system.

• Unless you are confident that you can handle the loudspeaker's weight, ask another

person to help you lift it onto the stand or pole.

• Make sure your cables are out of the way of performers, production crew, and audience so

they will not trip over them, pulling the loudspeaker off the stand or pole.

Sound Level

Permanent hearing loss may be caused by exposure to extremely high noise levels. The U.S.

Occupational Safety and Health Administration (OSHA) has specified permissible exposures to

certain noise levels. According to OSHA, exposure to high sound pressure levels (SPL) in

excess of these limits may result in hearing loss. When using equipment capable of generating

high SPL, use hearing protection while such equipment is under operation.

Hours per da

SPL (dB) Example Hours per da

SPL (dB) Example

8 90 Small gig 1.5 102 Riveting machine

6 92 Train 1 105 Machine factory

4 95 Subway train .50 110 Airport

3 97 High level desktop monitors .25 or less 115 Rock concert

2 100 Classical music concert

Wire Connections

You can wire your XLR or 1/4" TRS cables as balanced or unbalanced. Here are some

examples:

Determine the wiring configuration you need for your application and audio connections:

Tip

Sleeve

(Pin2)

(Pin3)

(Pin1, linked to Pin3)

Balanced

Unbalanced

Tip

Ring

Sleeve

Tip

Sleeve

Ring Tip

Sleeve

Ring

(Pin1)

Tip

Ring

Sleeve

Tip

Ring

Sleeve

Tip

Ring

Sleeve

Tip

Sleeve

Center

Screen

Tip

Sleeve

Tip

Sleeve

Tip

Ring

Sleeve

Tip

Ring

Sleeve

Tip

Sleeve

Center

Screen

Tip

Ring

Sleeve

Center

Screen

(Pin3)

(Pin2)

Quick Start / Connection Diagrams

Note: Items not listed in the Box Contents are sold separately.

Example A: 2 loudspeakers

Connect each of your mixer's

main outputs to the Input on a

TX loudspeaker.

Example B: 2 loudspeakers, 2 extensions

Connect each of your mixer's main outputs to the Input on a TX loudspeaker. Connect each of

your TX loudspeakers' Link Outputs to the inputs of your extension loudspeakers.

Mixer

Power Power

Microphones

(mixer's

main outputs)

Mixer

Power

Microphones

(mixer's

main outputs)

Power

Features

Rear Panel

1. AC Input: Use the included power cable to

connect this input to a power outlet. Make

sure the Power Switch is set to off when

connecting or disconnecting the cable.

2. Power Switch: Use this switch to power the

loudspeaker on or off. Make sure the

Volume knob is set to its minimum

(counterclockwise) position before turning it

on.

3. Power LED: This LED lights up when the

loudspeaker is on.

4. Cooling Vent: Keep the area in front of this

vent clear from obstructions. The fan behind

the vent cools the amplifier, preventing

overheating.

5. Volume: Turn this knob to adjust the

loudspeaker's volume.

6. Input: Use a standard XLR cable (not

included) to connect your audio source to

this input. Make sure to set the Volume

knob to the correct position.

7. Link Output: Use a standard XLR cable (not

included) to connect this output to the input

of another loudspeaker (i.e., another TX

loudspeaker).

8. Signal Limit LED: This LED lights up when

the audio signal being sent to the

loudspeaker is "clipping" or distorting. If this

LED illuminates frequently or steadily,

reduce the volume of your audio source.

Andere Handbücher für TX10

Inhaltsverzeichnis

Andere Alto Sprecher Handbücher

Alto

Alto Elvis Series Bedienungsanleitung

Alto

Alto SR500A Bedienungsanleitung

Alto

Alto RMX1008 DFX Bedienungsanleitung

Alto

Alto TS115 Vibe Bedienungsanleitung

Alto

Alto PS 4 LA EVO Bedienungsanleitung

Alto

Alto TOURMAX SX115 Bedienungsanleitung

Alto

Alto ELVIS 12S Bedienungsanleitung

Alto

Alto ELVIS 12 MKII Bedienungsanleitung

Alto

Alto TS112W Bedienungsanleitung

Alto

Alto TS210 Bedienungsanleitung

Alto

Alto ELVIS SPEAKER Bedienungsanleitung

Alto

Alto TX8 Bedienungsanleitung

Alto

Alto ACTIVE-8 Bedienungsanleitung

Alto

Alto TRUESONIC TS115W Bedienungsanleitung

Alto

Alto MICRO3 Bedienungsanleitung

Alto

Alto PS Series Bedienungsanleitung

Alto

Alto PS 5L Bedienungsanleitung

Alto

Alto ELVIS 10 Bedienungsanleitung

Alto

Alto IPA Music System Bedienungsanleitung

Alto

Alto MS8 Bedienungsanleitung

Alto

Alto Busker Bedienungsanleitung

Alto

Alto PS 5H Bedienungsanleitung

Alto

Alto Elvis Series Bedienungsanleitung

Alto

Alto MICRO3 Bedienungsanleitung

Beliebte Sprecher Handbücher anderer Marken

argon audio

argon audio IE20 Bedienungsanleitung

Denon

Denon SC-N7 Bedienungsanleitung

Gemline

Gemline Ace 3952 Bedienungsanleitung

Focal

Focal ON WALL 300 Bedienungsanleitung

HEADRUSH

HEADRUSH Maximus HRSP 5024 Bedienungsanleitung

SoundLogic

SoundLogic BCCS-6/6395 Bedienungsanleitung

Peavey

Peavey DTH 218 Bedienungsanleitung

Avantree

Avantree Pluto Air Bedienungsanleitung

Morel

Morel Integra Series INTEGRA OVATION 4 Bedienungsanleitung

Oppo

Oppo SONICA Bedienungsanleitung

Bose

Bose SoundLink Wireless Music System Bedienungsanleitung

Rocksteady

Rocksteady Stadium Bedienungsanleitung

Bowers & Wilkins

Bowers & Wilkins 4 Bedienungsanleitung

Sonance

Sonance SONOS OUTDOOR Series Bedienungsanleitung

Electro-Voice

Electro-Voice EVID FM4.2 Bedienungsanleitung

Pioneer

Pioneer XW-HTD630 Bedienungsanleitung

Onn

Onn BWA16AA002 Bedienungsanleitung

HP GL313AA - USB Speakers PC Multimedia Bedienungsanleitung