Amazon B07SZVW98Z Bedienungsanleitung

Drive Click Torque Wrench

Clé Dynamométrique à Cliquet

Drehmomentschlüssel

Chiave Dinamometrica a Scatto ad Avvitamento

Llave Dinamométrica Drive de Disparo

Drive Klik-Draaimomentsleutel

ドライブクリックトルクレンチ

B07SZVW98Z, B07SYTQ6FT, B07SV45HRY, B07ST25HJ5

English . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Français . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Deutsch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Italiano . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Español . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Nederlands . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

日本語 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

IMPORTANT SAFETY

INSTRUCTIONS

Read these instructions carefully and retain them for future use.

If this product is passed to a third party, then these instructions

must be included.

When using the product, basic safety precautions should always be

followed to reduce the risk of injury including the following:

• Do not use the product to loosen bolts, screws or the like, as this

might damage the ratchet and the calibrated settings.

• Do not use brute force on the product to tighten a nut/screw. During

tightening apply a steady and consistent pressure. Do not use as a

nut breaker, pry bar, hammer, or lever bar.

• To prevent damage to the product, stop applying pressure when

the “click” sound is heard. Bear in mind that the “click” sound is

acoustically weaker with lower torque settings.

• The product should be re-calibrated when it has been subjected to

an overload greater than its rated capacity, after repair, or after any

improper handling which might inﬂuence the errors of measurement.

• Do not use worn or damaged accessories (sockets or extension

pieces), as these may negatively inﬂuence the accuracy of the applied

force.

• Use only within rated torque range.

• Do not use a product that has been dropped. Have it tested before

putting back into use.

Before First Use

• Check the product for transport damages.

• Remove all the packing materials.

DANGER Risk of suffocation! Keep any packaging materials

away from children – these materials are a potential source of danger,

e.g. suffocation.

Product Description

60 50

1 0 92

100

120

140

110

150

130

2.5

6 5 4 37

A B

C D E

Front Back

ASquare drive

BDirection switch for ratchet function

CSpanner shaft

DHandle

ELock knob

FCoarse adjustment scale

GFine adjustment scale

HStorage box

Intended Use

• This product is intended to apply a speciﬁc torque force to a fastener

such as a nut or bolt.

• This product is intended for household use only. It is not intended for

commercial use.

• No liability will be accepted for damages resulting from improper use

or non-compliance with these instructions.

Operation

Setting the torque

This product is a dual-range torque wrench marked with pound inch

(in-lb/ft-lb) and Newton meters (Nm) on opposite sides of spanner shaft

(C).

NOTICE The desired torque force is summed up by ﬁnding the

largest possible value in the coarse scale (F) that is within the desired

torque force to be applied. Use the ﬁne adjustment scale (G) to reach the

desired value accurately.

• Twist the lock knob (E) to unlock.

• Turn the handle (D) clockwise to increase the torque and in anti-

clockwise direction to decrease the torque. The coarse and ﬁne scale

(F, G) show the torque value.

• The precise value is set by additional turning of the handle. The

number on the ﬁne adjustments scale at the vertical line is the added

torque to the value of the selected torque margin.

• Twist the lock knob (E) to lock.

B07SZVW98Z

Example: Setting the torque to 90 in-lb

0 010

35 in-lb 80 in-lb 90 in-lb

Example: Setting the torque to 5.65 Nm

105 0 105 0

3.95 Nm 5.65 Nm

B07SYTQ6FT

Example: Setting the torque to 38 ft-lb

01 4 01 4 34 2

15 ft-lb 35 ft-lb 38 ft-lb

Example: Setting the torque to 47.5 Nm

01 4 01 4

20.4 Nm 47.5 Nm

B07SV45HRY

Example: Setting the torque to 68 ft-lb

02 8 02 8 80 6

20 ft-lb 60 ft-lb 68 ft-lb

Example: Setting the torque to 94.9 Nm

02 8 02 8

27.1 Nm 94.9 Nm

B07ST25HJ5

Example: Setting the torque to 140 ft-lb

05 20 05 20 1520 10

25 ft-lb 125 ft-lb 140 ft-lb

Example: Setting the torque to 101.7 Nm

05 20 05 20

33.9 Nm 101.7 Nm

Tightening

• Fit an extension (not included) if required to the square drive (A).

• Set ratchet function direction on the direction switch (B).

• Install properly sized socket/attachment to the square drive (A).

• Set the direction switch (B) to tighten position.

• Operate the torque wrench the same as a standard socket wrench to

tighten the bolt/nut.

• Place the socket on bolt/nut and tighten slowly and steadily until

the “click” sound is heard. Stop pulling the wrench and release the

pressure on the handle (D). The bolt/nut is now tightened to the

required torque setting.

• Do not continue to pull after the torque setting is reached. Doing so

will over-tighten the bolt/nut and could damage the wrench.

Maintenance

• The product is lubricated for life and should not be oiled. The only

exception is the ratchet mechanism which may be lubricated as

needed for smooth operation.

NOTICE This product is a precision measuring instrument.

Calibration must be done regularly to ensure accuracy. It is recommend

to re-calibrate the product no later than 10,000 cycles or 12 months after

the date it is put in service, whichever comes ﬁrst.

Storage

• This product is a precision instrument and should be stored with care

using provided storage box. Avoid any vibrations and shocks.

• Set the torque to the lowest level before storage.

Speciﬁcations

Model number: B07SZVW98Z

Maximum torque value: 35 – 200 in-lb

(3.95 – 22.5 Nm)

Accuracy: +/–4 %

Net weight: approx. 1.2 lbs (560 g)

Dimensions (W x H x D): approx. 1.1 x 1 x 10.4”

(28 x 26 x 265mm)

Model number: B07SYTQ6FT

Maximum torque value: 15 – 80 ft-lb

(20.4 – 108.5 Nm)

Accuracy: +/–4 %

Net weight: approx. 1.8 lbs (830 g)

Dimensions (W x H x D): approx. 1.4 x 1 x 14.4"

(37 x 26 x 366mm)

Model number: B07SV45HRY

Maximum torque value: 20 – 150 ft-lb

(27.1 – 203.5 Nm)

Accuracy: +/–4 %

Net weight: approx. 2.6 lbs (1.2 kg)

Dimensions (W x H x D): approx. 1.7 x 1.1 x 18.1"

(45 x 29 x 460mm)

Model number: B07ST25HJ5

Maximum torque value: 25 – 250 ft-lb

(33.9 – 338.9 Nm)

Accuracy: +/–4 %

Net weight: approx. 4.8 lbs (2.2 kg)

Dimensions (W x H x D): approx. 1.8 x 1.3 x 24.8"

(46 x 35 x 630mm)

Feedback and Help

Love it? Hate it? Let us know with a customer review.

AmazonBasics is committed to delivering customer-driven products

that live up to your high standards. We encourage you to write a review

sharing your experiences with the product.

US: amazon.com/review/review‑your‑purchases#

UK: amazon.co.uk/review/review‑your‑purchases#

US: amazon.com/gp/help/customer/contact‑us

UK: amazon.co.uk/gp/help/customer/contact‑us

CONSIGNES DE SÉCURITÉ

IMPORTANTES

Veuillez lire attentivement les présentes instructions et les

conserver aﬁn de pouvoir vous y référer ultérieurement. En

cas de cession de ce produit à un tiers, le présent manuel

d’utilisation doit également lui être remis.

Lors de l’utilisation du produit, vous devez toujours prendre des mesures

de sécurité de base aﬁn de réduire tout risque de blessures, parmi

lesquelles:

• N'utilisez pas le produit pour desserrer des boulons, vis ou autres,

car cela pourrait endommager le cliquet et le calibrage de l'outil.

• N'exercez pas de force excessive sur le produit pour serrer un écrou

ou une vis. Lors du serrage, appliquez une pression constante et

régulière. À ne pas utiliser comme casse-écrou, pied-de-biche,

marteau ou levier.

• Pour éviter d'endommager le produit, cessez d’exercer toute

pression dès que vous entendez le «clic». Tenez compte du fait que

plus le couple de serrage est faible, moins le «clic» est audible.

• Le produit doit être calibré à nouveau lorsqu'il a été soumis à une

sollicitation supérieure à sa capacité nominale, après toute réparation

ou après toute manipulation inadéquate qui pourrait avoir une

inﬂuence sur son étalonnage.

• N'utilisez pas d'accessoires usés ou endommagés (douilles ou

rallonges), car ils peuvent altérer l'exactitude de la mesure de la force

déployée.

• À utiliser uniquement dans la plage de couple indiquée.

• N'utilisez pas un produit qui a subi une chute. Faites-le réviser avant

de l'utiliser à nouveau.

Avant La Première Utilisation

• Vériﬁez que le produit ne présente pas de dommages dus au

transport.

• Retirez tous les matériaux d'emballage.

DANGER Risque d’étouffement! Maintenez tous les matériaux

d'emballage hors de la portée des enfants. Ces matériaux constituent

une source de danger potentiel comme l’étouffement.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Amazon Werkzeuge Handbücher

Amazon

Amazon B07TQ86781 Bedienungsanleitung

Beliebte Werkzeuge Handbücher anderer Marken

Martor

Martor SECUNORM 175 Bedienungsanleitung

ERKCO

ERKCO 1000 Bedienungsanleitung

jbc

jbc N4473 Bedienungsanleitung

FEINMETALL

FEINMETALL FZWZ-SET-001 Bedienungsanleitung

Worx Professional

Worx Professional Sonicrafter WU676 Bedienungsanleitung

Gage Bilt

Gage Bilt GB713SH Bedienungsanleitung

Hilti

Hilti DX 9-ENP Bedienungsanleitung

norbar

norbar NORTRONIC 34399 Bedienungsanleitung

BGS technic

BGS technic 8578 Bedienungsanleitung

Makita

Makita DHR241 Bedienungsanleitung

Motor Guard

Motor Guard JMB-1250 Bedienungsanleitung

Power Adhesives

Power Adhesives 805-12 Bedienungsanleitung

Clemco

Clemco 24189 Bedienungsanleitung

VVG

VVG VNG 903 Series Bedienungsanleitung

Hilti

Hilti FX 3-A Bedienungsanleitung

axing

axing BWZ 5-02 Bedienungsanleitung

Dh-Robotics

Dh-Robotics RGI-100 Anleitung zur Verwendung

Goobay

Goobay 97790 Bedienungsanleitung