AmazonBasics Madison B07J5HRDC3 Bedienungs- und Sicherheitshinweise

Contemporary Door Lever

Palanca de Puerta Contemporánea

Levier de Porte Moderne

Madison

B07J5HRDC3, B07J4VHX2Y, B07J4HXZJZ, B07J51KW3G,

B07J51F4V8, B07J4VQCNH, B07J5MV6GV, B07J51L9YN,

B07J51DYMW, B07J4VVNYT

Reno

B07J4VHR6B, B07JVPNLY6, B07J4VHX48, B07J4VHVQ6,

B07J5HH1W7, B07J51F4W4, B07J51DZGZ, B07J4VHX4Y,

B07J51F4WH

Stamford

B07J51RFCR, B07J51DNYG, B07J4VHVRD, B07J4VDXG9,

B07J4VNSXN, B07J51RFD8, B07J4VNKH4, B07J5MXR6Y

English ..................................... 3

Español.................................. 14

Français ................................. 25

Welcome Guide •English

Contents:

Before getting started, ensure the package contains the following components:

Ax1 Fx1

Bx1 G

(Only for entry lever)

Cx1 Hx1

Dx1 Ix4

Ex1 Jx2

Before First Use

• Check for transport damage.

Risk of suffocation! Keep any packaging materials away from children – these

materials are a potential source of danger, e.g. suffocation.

Installation

Step 1: Latch Backset Adjustment

1. The backset is the distance from the door edge to the center of the hole on the door

face. Some locks are supplied with an adjustable latch which can ﬁt a 2-3/8" (60 mm) or

2-3/4" (70 mm) backset. Just follow the steps shown blow to change the backset.

2. This latch is set for a 2-3/8" (60 mm) backset.

3. Keep the spindle cam in correct position as illustrated. Pull the spindle cam all the way to the

right.

4. Your latch is now set for a 2-3/4" (70 mm) backset. To reset a 2-3/8" (60 mm) backset, just

push the spindle cam back to the left side. Please make sure that the cams stay with a squared

shape.

DANGER

Latch face plate

Prior to installation, please make sure that the face plate is appropriate for the latch.

Replace the face plate

1. Use the slotted screwdriver to pry open the face plate and the lock body.

2. Install the appropriate face plate onto the latch body.

Installation of the round face plate

• Align the round face plate to the head of the latch, and lock it into position.

Drive-in latch

Installation

Step 2: Determine Handing of Your Door

Hinges

Left-hand door

Hinges

Right-hand door

• Stand at the exterior side and face towards your door.

1. Your door is a left-hand door if the hinges were installed at your left.

2. Your door is a right-hand door if the hinges were installed at your right.

Installation

Step 3: Mark Door with Template

• Start at 36" (914 mm) from the ﬂoor, then fold and apply the template and mark the center of

door edge.

• Select a 2-3/8" (60 mm) or 2-3/4" (70 mm) backset as desired and mark the center of hole on

the door face.

The backset on the door face must be the same as the backset of your lock.

Step 4: Drill Holes

• Drill the holes as marked.

Drill a 2 -1/8" (54 mm) hole from both sides of the door to avoid splitting wood.

NOTICE

Installation

Step 5: Install Latch

Optional

1. Insert the latch into the hole, and keep it parallel to the door face. Mark the outline of the face

plate and remove the latch.

2. Chisel 1/8" (3 mm) deep or until the face plate is ﬂush with the door edge.

3. Insert latch and tighten screws.

Optional

• It is not necessary to chisel the door edge for the faceplate installation if you use the drive-in

latch. You may install it into the edge bore directly, but make sure the bevel is facing the outside

assembly.

Installation

Step 6: Install Outside Lever

• Insert the spindle through the latch. Press ﬂush against the door.

• Use handle tool (provided) to depress inside lever catch through the hole of the inside trim

collar. Pull lever off of rosette/mounting plate assembly.

•

Push down on trim plate at arrow point location with screwdriver to release trim from mounting plate.

Make sure the slot and dimple are aligned.

Round rose Square rose

NOTICE

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere AmazonBasics Sperren Handbücher

AmazonBasics

AmazonBasics B07TDT1D5S Bedienungsanleitung

AmazonBasics

AmazonBasics B07T2C43JW Bedienungsanleitung

AmazonBasics

AmazonBasics B077JSL9FQ Bedienungsanleitung

AmazonBasics

AmazonBasics B07T5MMZ46 Bedienungsanleitung

AmazonBasics

AmazonBasics TravelSentry B07SZ7732P Bedienungsanleitung

AmazonBasics

AmazonBasics B07T2C3QNZ Bedienungsanleitung

AmazonBasics

AmazonBasics TRAVEL SENTRY B07T4J9MKQ Bedienungsanleitung

AmazonBasics

AmazonBasics B07T2C4791 Bedienungsanleitung

AmazonBasics

AmazonBasics B07T3F5NL3 Bedienungsanleitung

AmazonBasics

AmazonBasics Travel Sentry AB-TL100 Bedienungsanleitung

AmazonBasics

AmazonBasics B088XWZ95X Bedienungsanleitung

Beliebte Sperren Handbücher anderer Marken

Magic

Magic 105 Bedienungsanleitung

Gantner

Gantner GAT NET.Lock 7020 System Kurzanleitung

Wittkopp

Wittkopp Insys 7202 Bedienungsanleitung

Dorma

Dorma Studio Classic Bedienungsanleitung

Securam

Securam ECSL-601 Bedienungsanleitung

Sudhaus

Sudhaus 3003 Bedienungsanleitung

Safety 1st

Safety 1st 48517 Bedienungsanleitung

Pado

Pado FDS-10 Bedienungsanleitung

Esco

Esco systeQ Series Bedienungsanleitung

COMPX

COMPX National D8951 Bedienungsanleitung

secureo

secureo Key Box Bedienungsanleitung

Stock Loks

Stock Loks C8713 Bedienungsanleitung

COMPX

COMPX 1T-058 Betriebsanleitung

Auslock

Auslock T11 Bedienungsanleitung

ELCOM

ELCOM 7205 Bedienungsanleitung

Stealth SAFES

Stealth SAFES ShadowVault Bedienungsanleitung

Knox

Knox KeySecure 5 Bedienungsanleitung

Kwikset

Kwikset 48334/01 Bedienungsanleitung