Ambiente LUNA STAT Bedienungsanleitung
TUE
MENU OK
ROOM TEMP
AM
18.5
9:30
2
c
LUNA STAT THERMOSTAT MANUAL
2CONTENTS
What is the Luna Stat 3
Installation procedure 6
Setting program mode 8
Programmable mode 9
LCD display 10
Setting the clock 13
Change/check
temperature
14
Schedule and comfort
settings 15
Setting the holiday mode 17
Optimum start 18
Non-Programmable
mode 19
LCD display 20
Change/check
temperature
22
Setback thermostat mode 23
TABLE OF CONTENTS
LCD display 24
Change/check
temperature
26
Setback temperature 27
Features available on all
program modes 28
Frost protection 28
Setting the hold mode 29
Keypad lock 30
Floor limit protection 31
Factory reset 32
Optional features
explained
33
Changing optional
features
36
Optional features table 37
Error codes 39
Wiring diagrams 40
3
WHAT IS THE LUNA STAT
The Luna Stat is a multi-function thermostat for underfloor
heating, radiators or any other form of heating where
multifunction temperature control is required.
The Luna Stat consists of two main modes
1. Standalone programmable/non-programmable thermostat
2. Set back thermostat with central programmer
WHAT IS THE LUNA STAT
4
PROGRAMMABLE/NON-PROGRAMMABLE THERMOSTAT
1. PROGRAMMABLE/NON-PROGRAMMABLE THERMOSTAT
The Luna Stat operates by itself as independent control to the
rest of the heating system as a thermostat in either
programmable or non/programmable operation.
A. Non Programmable – operates as a simple thermostat where
the temperature is held at the set point continuously.
B. Programmable – operates as a fully programmable thermostat
with 4 times at which to set a target temperature. This enables
you to regulate the temperature in your home by setting specific
temperatures for times of day.
This way the thermostat doesn’t operate the heating as On/Off
but as an Up/Down control to the specific temperatures you set
on your Luna Stat.
This enables you to have intricate control in each room creating
a micro climate in different areas of your home and regulating
the temperature for night, for when your home is unoccupied,
or even when individual rooms are unoccupied or not used.
5
SET BACK THERMOSTAT WITH CENTRAL PROGRAMMER
2. SET BACK THERMOSTAT WITH CENTRAL PROGRAMMER
The Luna Stat operates as temperature control on a room by
room basis in conjunction with a single programmer (supplied
separately) providing central timed control for larger areas or
whole houses.
The Luna Stat is set to non-programmable and maintains the
temperature at the set point whilst the programmer is on. When
the programmer is off the Luna Stat automatically drops the set
temperature by up to 5oC for example during the night or whilst
the property is unoccupied.
This enables the operation of an efficient system with simple to
use thermostat and central programmer rather than multiple
thermostats that need programming one at a time.
6
INSTALLATION PROCEDURE
INSTALLATION PROCEDURE
Care should be taken on where the Luna Stat is installed, as
being the ultimate control of your heating it is important that it is
not installed near any secondary hot or cold sources. The Luna
Stat should be installed at chest/eye level (approximately 1.5
metres) and where it will receive an even reading of the
temperature of the room. It should be installed out of direct
sunlight, away from draft or heat sources such as airing
cupboards. The Luna Stat is designed to be mounted flush and
will require an electrical back box with a depth of at least 35mm.
7
INSTALLATION PROCEDURE
Step 1
Separate the two halves of the
thermostat by using a small
flat screwdriver to disengage
the clips in the top edge of
the Luna Stat.
Step 2
Ensure that the front (Screen)
part of the thermostat is kept
somewhere safe and clean.
Terminate the cable for the
thermostat in accordance
with wiring diagrams on pages
40-43.
Step 3
Fix the thermostat back plate
back to the back box with the
screws provided, ensuring this
is secure.
Step 4
Clip the front on to the back
plate engaging the bottom
clips first.
8
PROGRAMMABLE MODE (5+2 AND 7 DAY)
SETTING YOUR PROGRAM MODE SELECTION
This Luna Stat has been set by default to a Programmable
thermostat in 5+2 day programming (Weekdays + Weekend).
To change between programmable, non-programmable and set
back thermostat follow these steps.
1. Press MENU till the ‘SET SETUP’ main menu item flashes.
2. Press OK 5 times, or until the small digits show ‘05’.
3. Press to change the large number for the following modes
• 00 – Non Programmable/Set back thermostat
• 01 = Weekday/Weekend programmable
• 02 = 7 day programmable
4. Press OK 10 times, or until the small digit shows ‘15’.
5. Press to change the large number for the following modes
• 00 – Setback thermostat disabled
• 01 = Setback thermostat enabled (non-programmable only)
6. Press MENU to save the setting and the button to return to
the home screen.
9
PROGRAMMABLE MODE (5+2 AND 7 DAY)
PROGRAMMABLE MODE (5+2 AND 7 DAY)
TUE
MENU OK
ROOM TEMP
AM
18.5
9:30
2
c
10 LCD DISPLAY
ROOM TEMP FLOOR TEMP
AM
188.8
88:88
2
c
PROGRAMMABLE MODE (5+2 AND 7 DAY)
TUEMON THUWED FRI SUNSAT
34
1
PERIOD
SET
SET
HOLD
SET
SETUP
HOLD LEFT HOLIDAY LEFT
PM
COPY TO
OVERRIDE
SET
SCHEDULE
SET
HOLIDAY
SET
CLOCK
1 2 3 4
7
8
10
14
12
16
15
13
11
9
6
5
Inhaltsverzeichnis
Andere Ambiente Thermostat Handbücher
Beliebte Thermostat Handbücher anderer Marken
EWELLY
EWELLY EW-181 Bedienungsanleitung
Prolon
Prolon T1100 Montageanleitung
Computherm
Computherm Q20 Bedienungsanleitung
Heatmiser
Heatmiser neoStat Bedienungsanleitung
Aube Technologies
Aube Technologies TH111GFCI-NP 240 VCA Bedienungsanleitung
Mars
Mars HEAT CONTROLLER IR Wireless Thermostat Bedienungsanleitung
