AMC iMIX1 Bedienungsanleitung
Important
Do not install this equipment in a
confined space such as a book case or
similar unit.
The apparatus should not be dripped or
splashed and no objects filled with
liquids, such as vases, should not be
placed on the apparatus.
This unit should not be used near water
(e.g. near bathtub, washbowl, kitchen
sink, laundry tub, in a wet basement, or
near a swimming pool, etc.) are should
be taken so than objects do not fall and
liquids are not spilled into enclosure
through openings.
Features
11 input channels: MI x 5, AUX x 3, D, Tuner, and hime.
Up to 3 mute priorities: hime, MI 1, MI 2.
2 power sources: A 230/115V 50/60Hz and D 24V.
2-color LED indicator for each input signal. Green is normal input, red is clipping.
Master volume, Bass, and Treble control for the output.
Record output
1U height
19” rack.
Description
iMIX 1 is a versatile and convenient Pre-mixer Amplifier. It accepts 11 input sources covering 5
MI , 3 AUX, D, Tuner, and hime input.
Signal from MI 1, MI 2, and hime will activate mute function, which will mute the signal
from other channels. The mute priority is hime, MI 1, and MI 2.
It employs high performance circuit, that makes its S/N ratio is better than 65dB and less than
0.1% of THD.
Besides A power source, iMIX 1 has D 24V input power screw connector as backup power
source.
On the front panel, above each volume control, LED lights green to indicate input signal
source; and when the signal is over, it will light red.
iMIX 1 is the ideal and convenient pre-mixer amplifier for multi-input source application.
Front Panel
1. MI 1 Volume ontrol
2. MI 2 Volume ontrol
3. MI 3 Volume ontrol
4. MI 4 Volume ontrol
5. MI 5 Volume ontrol
6. D Volume ontrol
7. TUNER Volume ontrol
8. AUX 1 Volume ontrol
9. AUX 2 Volume ontrol
10. AUX 3 Volume ontrol
11. HIME Volume ontrol
12. BASS ontrol
13. TREBLE ontrol
14. MASTER Volume ontrol
15. Power On / Off switch
16. MI 1 LED Indicator
17. MI 2 LED Indicator
18. MI 3 LED Indicator
19. MI 4 LED Indicator
20. MI 5 LED Indicator
21. D LED Indicator
22. Tuner LED Indicator
23. AUX 1 LED Indicator
24. AUX 2 LED Indicator
25. AUX 3 LED Indicator
26. hime LED Indicator
27. Volume LED Indicator
28. Power On LED Indicator
Rear Panel
1. Mains Power Input Socket
2. Power Fuse (for A )
3. Earth onnection Screw
4. A Voltage selection screw
5. D Power Supply Terminals
6. Line Out (XLR)
7. Line Out
8. RE output
9. HIME input
10. AUX 3 input
11. AUX 2 input
12. AUX 1 input
13. TUNER input
14. D input
15. MI 5 Phantom Power Switch
16. MI 5 input
17. MI 4 Phantom Power Switch
18. MI 4 input
19. MI 3 Phantom Power Switch
20. MI 3 input
21. MI 2 Phantom Power Switch
22. MI 2 input
23. MI 1 Phantom Power Switch
24. MI 1 input
Power Source
The supply transformer has been designed for use A 115V/230V(±10%) 60/50 Hz. Use Voltage
selection screw switch to select appropriate voltage.
DC power cource (24Vdc)
When using external batteries, ground the amplifier via the screw terminal (Electrical stability of the
system will be improved by providing a good earth ground.) When connecting batteries, ensure if
polarity is correct.
Microphone Connection
Mic1~5 inputs are XLR jack.
CD, ux, Tuner, and Chime Connection (Input)
iMIX1 has ability to connect 3 auxiliary inputs, which may be used for connecting signal sources
such as a Radio Tuner, D or assette player. The Aux input sockets are standard stereo R A
connectors. The line level ontrols on the front panel operate on each input source.
RC plug connections
Sleeve - Screen
Pin - Signal
SLEEVE
PIN
Line out & record out connections
Outputs can be connected via XLR and R A jacks. hoose right type connector to match your
equipment connector. Record out provides output for additional recording. onnect it to the input
of the recorder.
Power Source A 115V/230V 50/60 Hz, D 24V
Frequency Response 20Hz ~ 20KHz
Total Harmonic Distortion ≦1% @ 1KHZ
Input Sensitivity MI 1 ~5: 1mV @600Ω, Balanced
(with Phantom power switch)
AUX 1 ~3: 150mV @1KΩ,Unbalanced
D: 150mV @1KΩ, Unbalanced
Tuner: 150mV @1KΩ,Unbalanced
hime: 1 V @10KΩ,Unbalanced
Output Sensitivity Line Out: 1V @100Ω, Balanced
Record Out: 1V @100Ω, Unbalanced
Mute Priority hime, MI 1, MI 2.
Tone Control Bass 100HZ +/- 10 db
Treble 10KHZ +/- 10 dB
Power Consumption A 5W @ Rated Power
D 3 W @ Rated Power
Dimension 44(H) x 483(W) x 185(D) mm
Weight 4 kg
Mounting 19” rack
AMC is a registered trademark of AMC Baltic www.amcpro.lt
Inhaltsverzeichnis
Andere AMC Verstärker Handbücher
AMC
AMC A65U Benutzerhandbuch
AMC
AMC 2N100-5 Benutzerhandbuch
AMC
AMC iCOM 2x20 Bedienungsanleitung
AMC
AMC iMIX 63 Bedienungsanleitung
AMC
AMC 2N100MKII Series Benutzerhandbuch
AMC
AMC MA 30X Bedienungsanleitung
AMC
AMC MA 2X100 Bedienungsanleitung
AMC
AMC XG Benutzerhandbuch
AMC
AMC 25100 Benutzerhandbuch
AMC
AMC MA 30 Bedienungsanleitung
AMC
AMC IA series Bedienungsanleitung
AMC
AMC A Series Bedienungsanleitung
AMC
AMC 2445a Bedienungsanleitung
AMC
AMC DMPA Light 30 Bedienungsanleitung
AMC
AMC iA2X250 Bedienungsanleitung
AMC
AMC iA2X250 Bedienungsanleitung
AMC
AMC 3100a Bedienungsanleitung
AMC
AMC MIC iMIX Bedienungsanleitung
AMC
AMC iAC 120 DSP Bedienungsanleitung
AMC
AMC HEADPHONES AMP Series Bedienungsanleitung
