AMEC NK-80 Bedienungsanleitung

User’s Manual

The entire contents of this instruction manual, including any future

updates, revisions, and modifications, shall remain the properties of

AMEC at all times. Unauthorized copies or reproductions of this manual,

either partial or whole, in any form of print and electronic media, are

prohibited. The equipment mentioned in this manual can only be used in

accordance with instructions contained in this manual.

DISCLAIMER

AMEC is devoted to publish and maintain this document. As we continue

to improve our products and manuals, information presented in this

document is subject to change without notice. AMEC does not make any

representations or warranties (implied or otherwise) regarding the

accuracy and completeness of this document and shall in no event be

liable for any loss of profit or any commercial damages, including but not

limited to special, incidental, consequential, or other damages.

Technical Support:

Sales & Marketing: Version 1.04

ALLTEK MARINE ELECTRONICS CO., LTD

7F, No. 605, Ruei-Guang Rd., Neihu, Taipei, Taiwan 114

TEL: +886 2 2627 1599

FAX: +886 2 2627 1600 www.alltekmarine.com

(Your Local Dealer/Agent Warranty Stamp)

WARNING!

WARNING

ELECTRICAL SHOCK

HAZARD.

Do not disassemble the

equipment. Only qualified

personnel should service the

product.

TURN OFF THE POWER

IMMEDIATELY IF WATER

LEAKS IN OR OBJECT

DROPS ONTO THE

EQUIPMENT.

Continue operating the equipment

could cause electrical shock or

fire. Contact your nearest

distributor for service.

AVOID OPERATING THE

EQUIPMENT WITH WET

HANDS.

Despite the fact that it is safe, but

like any other electric appliances,

operate with dry hands.

WARNING

PLEASE KEEP AWAY FROM

DIRECT WATER CONTACT.

Even though the equipment is

waterproof, it is recommended to

keep water away from reach.

Water leaking into the equipment

may cause electrical shock or fire.

The equipment said in this manual must only be used to which it was

designed. Improper operation or installation may cause damage to the

equipment. AMEC will not incur any liability as a result of equipment

damage or data loss due to improper usage or installation of the

equipment. It is strongly recommended reading this manual and the

following safety instructions before proceeding to the installation or

operation.

III

FOREWORD

Congratulations on the purchase of NK-80 NMEA 2000 adaptor. NK-80

NMEA 2000 adaptor is clever designed to enable communication

between NMEA 2000 and NMEA 0183. Unless improper used, installed,

or maintained, the equipment should perform at its optimum.

The operation instructions contained in this manual is applied only to

NK-80. AMEC and the authorized local agent/dealer will not bear any

responsibilities of damages resulted from improper installations made by

unauthorized agent/dealer.

We thank you for choosing our product

Table of Contents

Page

1. NK-80 Introduction ........................................................1

1.1. What is NMEA 2000?..............................................................1

1.2. NK-80 Overview......................................................................1

2. Installation......................................................................2

2.1. Items in the Package .............................................................2

2.2. Connection.............................................................................3

2.2.1. NMEA 2000 Connections................................................3

2.2.2. NMEA 0183 Connections................................................4

3. Operation........................................................................6

3.1. Operation in NMEA 2000 Network.........................................6

3.2. LED Indication........................................................................7

3.3. Configuration Utility ..............................................................8

3.3.1. Change NMEA 0183 Default Baud Rate (38,400 bps) ..11

3.3.2. Filter NMEA 0183 / NMEA 2000 Output Messages.......12

3.3.3. Save NMEA 0183 Output Message Log........................14

4. Appendix ......................................................................16

4.1. Product Specifications........................................................16

4.2. Dimension ............................................................................17

4.3. PGN Information ..................................................................18

4.4. NMEA0183 Information........................................................20

1. NK-80 Introduction

1.1.What is NMEA 2000?

The NMEA 2000 transmits data through Controller Area Network (Can Bus). It

simplifies the connections and enables information sharing among different devices

through a single trunk cable. Compared with NMEA 0183 in “RS422”interface,

NMEA 2000 has better transmission reliability and shares data easier in a network.

1.2.NK-80 Overview

NK-80 NMEA 2000 adaptor (as known as NK-80) is a gateway between NMEA 0183

electronic devices and NMEA 2000 device/network. NK-80 allows users to connect

their existing NMEA1083 devices to the NMEA 2000 network.

The key features of NK-80 are shown as follows:

High-Performance 32-bit RISC CPU has a performance of 80 DMIPS to manage

high traffic loading of NMEA data transactions.

Build-in memory storage with 64KB RAM and 256KB Flash ROM, it is more

effective to control the dataflow.

Configurable through a serial connection allows users to monitor/control NMEA

data transactions.

NMEA 2000 Certified ensures product quality is reliable in most extreme conditions.

Isolated power is provided through NMEA 2000 network, NK80 requires no

additional battery source.

2. Installation

2.1.Items in the Package

The NK-80 standard package is listed in Table 2.1. It is also illustrated in Figure 2.1.

Table 2.1 Standard Equipment List

No.

Description

Qty

AMEC NK-80 NMEA

2000 adaptor

Manual

Screw M4

Figure 2.1 Standard Package

2. Manualx1

1. NK-80x1

3. Screw M4x4

4. CDx1

2.2.Connection

Diagram below shows the physical attributes of NK-80.

2.2.1.NMEA 2000 Connections

The Micro-C male connector is an NMEA 2000 standard connector. Connect this

connector to any available Micro-C female connector in the NMEA2000 network.

Figure 2.2.1 Pin Definitions of the Micro-C Male Connector

Shield

NET-H

NET-L

NET-C

NET-S

0.1 meter 1 meter

Micro-C male LED 1 LED 2

NMEA2000 NMEA0183

2.2.2.NMEA 0183 Connections

The NMEA 0183 cable provides flexible wiring to devices. Please follow the NMEA

0183 cable description below when wiring to an NMEA 0183 device.

Table 2.2.2. Wire Information for NMEA 0183 Cable

Wire color

Name

Function

RED

TXP

Positive(＋); NMEA 0183 Data output

GREEN

TXN

Negative (－); NMEA 0183 Data output

BLACK

RXP

Positive(＋); NMEA 0183 Data input

BLUE

RXN

Negative (－); NMEA 0183 Data input

SHIELD

GND

Ground

Wiring NMEA 0183 to NMEA 0183/RS-422 Device

Please follow the wiring diagram below to connect an NMEA 0183/RS-422 device.

Figure 2.2.2.1-1 NMEA 0183 to RS-422 Connection

NOTE: Please ensure the connecting device is fully NMEA 0183 compliant.

NK-80 NMEA 0183

NMEA 0183/RS-422 device

TXP

TXN

RXP

RXN

RXP

RXN

TXP

TXN

Wiring NMEA 0183 to RS-232/PC

Please follow the wiring diagram below to connect to RS-232/PC

Figure 2.2.2.1-2 NMEA 0183 to RS-232 Connection

NOTE: Please ensure the wire definitions of RS-232/PC are correct during wiring.

NK-80 NMEA 0183

RS-232/PC

TXP

TXN

RXP

RXN

GND

Andere Handbücher für NK-80

Inhaltsverzeichnis

Andere AMEC Adapter Handbücher

AMEC

AMEC NK-80 Bedienungsanleitung

Beliebte Adapter Handbücher anderer Marken

PCB Piezotronics

PCB Piezotronics 090B274 Bedienungsanleitung

Gossen MetraWatt

Gossen MetraWatt AT3-III E Bedienungsanleitung

Akribis

Akribis ITF-21-BISS-MIT Bedienungsanleitung

Auvidea

Auvidea J20 Produkthandbuch

Tenda

Tenda W54U Bedienungsanleitung

ROHO

ROHO AGILITY Bedienungsanleitung

PROLiNK

PROLiNK WN2001 Bedienungsanleitung

Hawking

Hawking HUF2 Bedienungsanleitung

Airlink101

Airlink101 AWLC4030 Bedienungsanleitung

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Bedienungsanleitung

Philips

Philips SWA4554S/10 Bedienungsanleitung

JVC

JVC TS-C9D2B Gebrauchsanweisung

NETGEAR

NETGEAR A6100 Bedienungsanleitung

D-Link

D-Link DWA-121 Bedienungsanleitung

Philips

Philips SWA2037 Bedienungsanleitung

Basalte

Basalte 0610-20 Bedienungsanleitung

Yealink

Yealink EHS40 Bedienungsanleitung

RCA

RCA AH57R Bedienungsanleitung