Amedia DMA 3.1L Bedienungsanleitung

Wireless Multimedia Connectivity Solutions

5960 Cornerstone Court West, Suite 201, San Diego, CA 92121

Tel: 858.535.9701 Fax: 858.535.9746

Digital Media Adapter (DMA 3.1L)

User Manual

Version 1.0

AMEDIA CONFIDENTIAL AND PROPRIETARY INFORMATION

2006 Amedia Networks, Inc. (Unpublished)

This document contains confidential and proprietary information of Amedia Networks, Inc. and is protected by copyright,

trade secret and other state and federal laws. Its receipt or possession does not convey any rights to reproduce, disclose

its contents, or to manufacture, use or sell anything it may describe. Reproduction, disclosure or use without specific

written authorization of Amedia Networks, Inc. is strictly forbidden.

Amedia Networks, Inc. DMA3.1L User Manual

Table of Contents

1Overview................................................................................................................................................3

2System Diagram....................................................................................................................................3

3Key Features.........................................................................................................................................3

4DMA3.1L Photos..................................................................................................................................4

5Checklist................................................................................................................................................4

6Pairing Procedure.................................................................................................................................4

7Wireless AV Sender Setup...................................................................................................................4

8Wireless AV Receiver Setup................................................................................................................5

9System Status........................................................................................................................................5

10 Functional Specifications.....................................................................................................................5

10.1 Audio and Video Inputs at the Wireless AV Sender...................................................................5

10.1.1 Video Inputs........................................................................................................................5

10.1.2 Audio Inputs .......................................................................................................................6

10.2 Audio and Video Outputs............................................................................................................6

10.2.1 Video Outputs.....................................................................................................................6

10.2.2 Audio Outputs.....................................................................................................................6

10.3 IR Function..................................................................................................................................6

10.4 NTSC/PAL Auto-Detect..............................................................................................................6

10.5 LED and Switch ..........................................................................................................................7

10.6 System Security...........................................................................................................................7

11 FCC Information..................................................................................................................................7

Amedia Networks, Inc.

2006 Amedia Networks (Unpublished)



Confidential & Proprietary

Amedia Networks, Inc. DMA3.1L User Manual

1 Overview

The Digital Media Adapter (DMA3.1L) delivers video and audio over 5GHz wireless channels using

Amedia Networks’ WiViTM wireless networking technology. It enables a wireless connection between

video/audio sources (for example, DVD, VCR, PVR, STB, and PC) and a video/audio display (TV, flat

panel or video monitor).

The IR relay function enables the user to control the Video Source devices from a remote TV. The user

can use the original remote control of the video source devices (such as DVD) by pointing the remote

control at an IR receiver located at the Wireless AV Receiver. The IR signals are conveyed by the

wireless network to the Wireless AV Sender.

2 System Diagram

Composite (CVBS)

S-Video

Audio

IR Extender

MPEG-2

Encoder

Wireless AV Sender

(DMA3.1L_AP)

Video Source Amedia

WVA

Chipset MPEG-2

Decoder

TS Video

Display

(TV)

Wireless AV Receiver

(DMA3.1L_MT)

Amedia

WVA

Chipset

Composite

S-Video

Audio

Video

Source

Remote

Control

3 Key Features

The following is a list of the key features of the DMA3.1L system.

1) Wireless communication at 5 GHz.

2) Close-loop power control to minimize power consumption and be a friendly neighbor to other

WLAN networks at 5 GHz.

3) Guaranteed full QoS transporting of multimedia contents.

4) Secure networking to assure privacy and content rights protection.

5) Transmission of IR control signals to the video source devices from the TV location.

6) MPEG-2 standard video compression and decompression.

7) Auto detection of NTSC and PAL.

Amedia Networks, Inc.

2006 Amedia Networks (Unpublished)



Confidential & Proprietary

Amedia Networks, Inc. DMA3.1L User Manual

4 DMA3.1L Photos

5 Checklist

Wireless AV Sender (DMA3.1L AP)

Wireless AV Receiver (DMA3.1L MT)

IR extender cable

Two power supplies (220VAC/110VAC to 5VDC)

6 Pairing Procedure

Wireless AV Sender and Wireless AV Receiver must be paired to form a unique trusted communication

pair. Follow the Pairing Procedure below with the Wireless AV Sender and Receiver easily accessible at

the same time.

Connect power supply to the Wireless AV Sender.

Connect power supply to the Wireless AV Receiver.

Wait for the Link LED on both units to be blinking.

Press the Pairing Button on the back of the Wireless AV Sender. The Pairing LED shall turn on.

Press the Pairing Button on the back of the Wireless AV Receiver. The Pairing LED shall turn

on.

The Pairing Procedure is successfully completed when the Link LED on both units remain on.

Now the Wireless AV Sender and Receiver share a common secret code for privacy.

7 Wireless AV Sender Setup

Connect video source to Wireless AV Sender video input (composite or S-video).

Connect stereo audio input to Wireless AV Sender.

Connect one end of the IR extender cable to the Wireless AV Sender; place the IR emitter end to

the IR sensor of the video source. An example is shown in Figure 1.

Connect power supply.

Amedia Networks, Inc.

2006 Amedia Networks (Unpublished)



Confidential & Proprietary

Amedia Networks, Inc. DMA3.1L User Manual

Figure 1 DVD IR Sensor

8 Wireless AV Receiver Setup

Connect video output (composite or S-video) to TV.

Connect stereo audio output to TV.

Connect power supply.

9 System Status

1. Upon power on, the Power LED will be on.

2. After system boot up (up to 10 seconds on the Wireless AV Sender), the Link LED will blink

indicating acquisition mode.

3. When communication is established between the Sender and Receiver, the Link LED will stay on

indicating tracking mode.

4. In tracking mode, video and audio input signal at the Wireless AV Sender is sent wirelessly to the

video and audio output at the Wireless AV Receiver.

10 Functional Specifications

10.1 Audio and Video Inputs at the Wireless AV Sender

The DMA3.1L system transmits audio and video signals from the Wireless AV Sender to the Wireless

AV Receiver, by encoding and multiplexing the signals according to MPEG-2 standards. The Wireless

AV Sender includes video and audio inputs.

10.1.1 Video Inputs

a) The Wireless AV Sender supports the following video inputs:

-Composite Video input

-S-Video input

Amedia Networks, Inc.

2006 Amedia Networks (Unpublished)



Confidential & Proprietary

Amedia Networks, Inc. DMA3.1L User Manual

b) The video input is selected by automatic detection of a video signal in one of the inputs. If two inputs

become active simultaneously, the order of precedence is: S-video, Composite video.

c) Video standards supported on video inputs: NTSC and PAL.

d) The system supports NTSC Closed Caption signals. The CC signals are accepted at the video inputs

and transferred to the video outputs.

10.1.2 Audio Inputs

The Wireless AV Sender supports an analog stereo audio input, consisting of Left and Right audio

channels.

10.2 Audio and Video Outputs

The Wireless AV Receiver decodes the MPEG-2 stream, de-multiplexes the audio and video signals, and

outputs the signals to the TV. The Wireless AV Receiver includes video and audio outputs.

10.2.1 Video Outputs

The Wireless AV Receiver supports two video outputs:

-Composite Video output

-S-Video output.

b) Video output standard (NTSC/PAL) is according to video input.

c) Video standards supported on video outputs: NTSC and PAL.

d) Support of Closed Caption signals.

10.2.2 Audio Outputs

The Wireless AV Receiver supports an analog stereo audio output, consisting of Left and Right audio

channels.

10.3 IR Function

The IR function enables the user to control the video source devices such as DVD and STB, even when

the TV and the video source devices are not in the same room. The user can use the original remote

control unit of the video source device by pointing the remote control at an IR receiver located at the

Wireless AV Receiver. The IR receiver at the Wireless AV Receiver receives the IR signal, digitizes it,

and sends it over the air to the Wireless AV Sender, which re-generates the IR transmission towards the

video source device’s IR receiver.

10.4 NTSC/PAL Auto-Detect

The Wireless AV Sender automatically detects the NTSC/PAL system of the active input video source.

The Wireless AV Receiver will output the same system correspondingly. Video source and TV must be

of the same system.

Amedia Networks, Inc.

2006 Amedia Networks (Unpublished)



Confidential & Proprietary

Amedia Networks, Inc. DMA3.1L User Manual

10.5 LED and Switch

The DMA3.1L supports LED outputs and switch/button inputs as follows:

No. Name Description

1 Power LED On: power on

2 Link LED Blinking: acquisition mode (searching for Wireless AV

Sender/Receiver)

Solid on: track mode (found Wireless AV Sender/Receiver,

link established)

3 Pairing LED On during pairing procedure

4 Pairing switch Initiates pairing procedure

10.6 System Security

The communication is authenticated and the media stream is encrypted, to assure for protection of

copyrighted material.

Flexible pairing procedure between each Wireless AV Sender and Wireless AV Receiver ensures private

communications between each pair of units. This also allow for coexistence of multiple pairs of

simultaneous operations without cross talk.

11 FCC Information

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and (2) this device must accept any interference

received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the

user’s authority to operate the equipment.

WARNING: This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses and can radiate

radio frequency energy and, if not installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and on, the user is encouraged to try to

correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from the one which the receiver is

connected to.

Consult the dealer or an experienced radio/TV technician for help.

Amedia Networks, Inc.

2006 Amedia Networks (Unpublished)



Confidential & Proprietary

Amedia Networks, Inc. DMA3.1L User Manual

This equipment complies with the FCC RF radiation exposure limits set forth for an uncontrolled

environment. This equipment should be installed and operated with a minimum distance of 20 centimeters

between the radiator and your body. This transmitter must not be co-located or operating in conjunction

with any other antenna or transmitter.

Amedia Networks, Inc.

2006 Amedia Networks (Unpublished)



Confidential & Proprietary

Inhaltsverzeichnis

Andere Amedia Adapter Handbücher

Amedia

Amedia vStar DMA3000T Bedienungsanleitung

Beliebte Adapter Handbücher anderer Marken

PCB Piezotronics

PCB Piezotronics 090B274 Bedienungsanleitung

Auvidea

Auvidea J20 Produkthandbuch

Gossen MetraWatt

Gossen MetraWatt AT3-III E Bedienungsanleitung

Akribis

Akribis ITF-21-BISS-MIT Bedienungsanleitung

Tenda

Tenda W54U Bedienungsanleitung

ROHO

ROHO AGILITY Bedienungsanleitung

PROLiNK

PROLiNK WN2001 Bedienungsanleitung

Hawking

Hawking HUF2 Bedienungsanleitung

Airlink101

Airlink101 AWLC4030 Bedienungsanleitung

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Bedienungsanleitung

Philips

Philips SWA4554S/10 Bedienungsanleitung

JVC

JVC TS-C9D2B Gebrauchsanweisung

NETGEAR

NETGEAR A6100 Bedienungsanleitung

D-Link

D-Link DWA-121 Bedienungsanleitung

Philips

Philips SWA2037 Bedienungsanleitung

Basalte

Basalte 0610-20 Bedienungsanleitung

Yealink

Yealink EHS40 Bedienungsanleitung

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Bedienungsanleitung