Amegia AM1200 Bedienungsanleitung

- 1 -

2 Megapixels

Compact High-End

Network Camera

User’s Manual

Draft 1.2

- 2 -

INDEX

1OVERVIEW ..................................................................................................................- 3 -

2PRODUCT DESCRIPTION.............................................................................................- 3 -

2.1 H

ARDWARE

ESCRIPTION

........................................................................................... -

3SETTING UP THE NETWORK CAMERA .......................................................................- 5 -

3.1 R

EAD

EFORE

..................................................................................................... -

3.2 H

ARDWARE

NSTALLATION

TEPS

.................................................................................. -

3.3 U

SING THE

ETWORK

AMERA FOR THE FIRST TIME

......................................................... -

4ACCESSING THE NETWORK CAMERA.........................................................................- 7 -

4.1 F

INDING THE CAMERA

................................................................................................. -

4.2 B

EFORE

SSIGNING AN

DDRESS

.............................................................................. -

4.3 E

XECUTING THE

ISCOVERY

..................................................................................... -

4.4 A

SSIGNING THE

ADDRESS TO THE NETWORK CAMERA

.................................................... -

4.5 A

CCESS THE CAMERA FROM THE BROWSER

...................................................................... -

4.6 T

IVE

IEW

AGE

............................................................................................... -

5CONFIGURING THE CAMERA ...................................................................................- 12 -

5.1 V

IDEO

ETTINGS

...................................................................................................... -

5.2 C

AMERA

ETTINGS

................................................................................................... -

5.3 S

TORAGE

ETTINGS

.................................................................................................. -

5.4 E

VENT

ETTINGS

..................................................................................................... -

5.5 N

ETWORK

ETTINGS

................................................................................................ -

5.6 S

YSTEM

ETTINGS

.................................................................................................... -

5. A

PPLICATION

.......................................................................................................... -

6TROUBLESHOOTING .................................................................................................- 35 -

6.1 E

MERGENCY

ACTORY

EFAULT

................................................................................. -

6.2 V

IEWING THE CAMERA FROM A REMOTE LOCATION

......................................................... -

7FREQUENTLY ASKED QUESTIONS ............................................................................- 39 -

8TECHNICAL SPECIFICATIONS ....................................................................................- 41 -

9GLOSSARY OF TERMS ...............................................................................................- 43 -

10 FCC STATEMENT………………………………………………………………………………………………- 50 -

- 3 -

1O er iew

This network camera is intended for your home and commercial surveillance usage under indoor environments.

It comes with a High-end 2-megapixel CMOS Sensor, with a maximum resolution of 1600 x 1200, delivering detailed

images and covering 6 times larger than a VGA camera.

The dPTZ (Digital Pan Tilt Zoom) allows user to navigate through the area of the image of most interest without

relocating the camera physically. With unique features it delivers a simple solution for securing and monitoring.

2Product Description

Key features

1. H.264 High Profile / MJPEG Dual Compression:

Offers the user the option to select H.264 or MJPEG compression.

2. Compact Size for Easy Installation and Maneu ering:

Small and light weighted, for areas that are limited in space.

3. ONVIF ® Compliant for Easy Integration & Fast Deployment:

Web services built-in with international standard protocols, integration cycles have been reduced and

deployment has become easier. ( Contact your distributor for documentation).

4. Multiple ideo profiles simultaneously for streaming:

Streams up to 6 independent streams with multiple profiles.

Different configurations can be set according to the bandwidth that is available from the network.

5. Speaker and Microphone Hidden & Built-In:

Offers integrated speaker and Microphone, allowing remote listening in the area where the camera is

installed, as well as communication with the other person using the speaker.

6. Micro SD Card Slot for Local Storage

For saving snapshots that can be later checked by the user, upon events occurred during motion detection.

7. Wi-Fi, IEEE 802.11 b/g for Wireless Networks (Optional)

For areas that wiring network cables is difficult and arduous work, using the wireless feature can be an

effort-saver.

8. Infrared LED for Day & Night Model,3 ~5 Meters (Optional)

There are infrared LEDs located underneath the transparent cover.

- 4 -

2.1 Hardware Description

Bracket

(

Back

Side

View

)

Speaker

Microphone

Audio Out

(

Lower Side

View

)

Default Button

Network

Connector

Power Connector

Built

In Wireless

ntenna

(optional)

Micro SD Card slot

Bracket Nut Hole

(

Back

Panel View

)

Ligh

Sensor (Optional)

Lens Focus Ring

(

Front Panel View

)

Built

Infrared

LEDs (optional)

Power LED

Note: * For Day only models, the Light Sensor will be replaced with the Power LED

- 5 -

3Setting up the Network Camera

3.1 Read Before Use

The use of surveillance devices may be prohibited by law in your country. The Network Camera is not only a

high-performance web-ready camera but can also be part of a flexible surveillance system. It is the user’s

responsibility to ensure that the operation of such devices is legal before installing this unit for its intended use.

It is important to first verify that all contents received are complete. Take note of the warnings in the Quick

Installation Guide before the Network Camera is installed; then carefully read and follow the instructions in the

Installation chapter to avoid damage due to faulty assembly and installation. This also ensures the product is used

properly as intended. It is designed for various applications including video sharing, general security/surveillance,

etc.

3.2 Hardware Installation Steps

After unpacking the package and identifying its parts, assemble the network camera to run the device for the first

time.

It is recommended set up the camera before installing it to the intended location.

The following instructions will consist of basic steps that will help you through the hardware preparation.

Other required devices before powering up the Network Camera:

1. Personal Computer or Laptop; and

2. Network Hub or Switch and 2 (two) pieces of Ethernet Cable; or

3. 1(one) piece of Crossover Ethernet Cable

STEPS:

Attach

the bracket that

comes in the package to the

Bracket Nut Hole

2. Connect the Ethernet Plug to

the Network Connector RJ-45

from the device

3. Plug the Power Jack to the

Power Connector

4. After the Power Connector is

plugged in, the Network

Camera will boot up.

The Power LED will be on to

guarantee the proper

functioning.

5. Wait a few seconds for the

Network Camera to be

detected in the network.

6. Refer to the section of “Using

the Network Camera for the

first time” in the next page

(

Back

Panel View

)

- 6 -

3.3 Using the Network Camera for the first time

The Network Camera is a network device and its use should be straightforward for those who have basic

networking knowledge. Making the initial steps for setting up the network camera will be based on a simple

network connection.

Option 1

Connect the network camera to a HUB / Switch which is connected to a PC

Option 2

Connect the network camera directly to a PC with a crossover cable.

After the network camera has its activity lights on, use the PC for setting up the IP Address of the Network camera.

Refer to the section of “Accessing the Network Camera” at the next page for detailed instructions.

Hints: Possible Network Configurations in your network infrastructure

1. Configuration 1

Internet Access: ADSL or Cable Modem

IP address: One real IP or one dynamic IP

Connection Type: Only the Network Camera connects to the internet

For fixed real IP, set up the IP into the Network camera. For dynamic IP, start PPPoE.

2. Configuration 2

Internet Access: ADSL or Cable Modem

IP address: More than one real IP or one dynamic IP

Connection Type: The Network Camera and PC connect to the internet

Device needed: Switch Hub

For fixed real IP, set up the IP into the Network camera and PC. For dynamic IP, start

PPPoE.

3. Configuration 3

Internet Access: ADSL or Cable Modem

IP address: one real IP or one dynamic IP

Connection Type: The Network Camera and PC connect to the internet

Device needed: IP sharing such as Hub / Switch and a Router

Use virtual IP, set up port forwarding in IP sharing.

(Suggestion: Refer to your Network Administrator if necessary for more information)

- 7 -

4Accessing the Network Camera

4.1 Finding the camera

IP Disco ery Tool

IP Discovery is the software that provides an easier way for setting the IP address and network configurations of

the Network Camera. Using this tool, you can easily set multiple Network Cameras at the same time.

By utilizing the IP Discovery tool, the setting process is largely simplified and the setting time is effectively

shortened.

4.2 Before Assigning an IP Address

Make sure the Network Camera is powered on and correctly connected to the network.

Obtain a LAN IP address not yet used and its related configuration from your network administrator.

The following will be required:

1. IP Address

2. Subnet Mask

3. Gateway

4. DNS1

5. DNS2

6. Port

MAC Address: Each Network Camera has a unique Ethernet address (MAC address) shown on the bottom of the

Network Camera as the serial number (S/N) with 12 digits (e.g. 00-0E-C9-03-21- 3) .

4.3 Executing the IP Disco ery

Locate the IP Discovery software in the CD and click on “IPDIS.exe” to execute the software.

After executing the IP Discovery software, you will have the following screen.

Hints: When assigning an IP Address

Always consult your network administrator before assigning an IP address to your server.

- 8 -

4.4 Assigning the IP address to the network camera

Identify your Network Camera by its MAC address, which is located in the Product Label on the Network Camera.

Click on the network camera for which a new IP address will be assigned to it, and proceed to fill with the

following information.

1. IP Address

2. Subnet Mask

3. Gateway

Once filled in, click on “Change IP” to apply the changes made on the Network Camera.

Close the IP Discovery Utility tool and you should be able to access the camera from the browser.

To access the network camera, select the MAC address and click on Browse.

4.5 Access the camera from the browser

Start the Internet Explorer browser to start accessing the network camera.

Enter the IP address or host name of the camera in the Location/Address field of your browser.

The first time when the Network Camera is accessed, the Live View page will be shown without

restrictions.

Once entered, click OK and you should be able to see Live View Page.

For the first time to view the camera video via Internet Explorer, it will ask you to install the ActiveX component.

To allow the installation of the ActiveX , adjust the Security Options of Internet Explorer follow the below

instructions:

Internet Explorer > Tools > Internet Options > Security Tab > Custom Level > Security Settings > Download

unsigned ActiveX controls > Select “Enable” or Prompt.

Internet Explorer > Tools > Internet Options > Security Tab > Custom Level > Initialize and script ActiveX controls

not marked as safe > Select “Enable” or Prompt

- 9 -

When popup the following dialogue box, click “Yes”

Hints: Changing the root password

To avoid security breaches, it is recommended changing the Username and Password once the

device is set up to work. Refer to Chapter 5, Configuring the Camera, System Settings.

- 10 -

4.6 The Li e View Page

Video Source:

The Stream Profile drop-down list allows you to select a customized or pre-programmed stream profile on

the Live View page. Refer to Streaming Settings of this chapter for more references.

Rotation: allows the rotation of the video to be viewed in an angle of 0 (current), 90, 180 or 2 0 degrees at a

clockwise direction.

Inhaltsverzeichnis

Andere Amegia Sicherheitskamera Handbücher

Amegia

Amegia Network Camera Bedienungsanleitung

Beliebte Sicherheitskamera Handbücher anderer Marken

Okina USA

Okina USA SIR36-870VF650LP Bedienungsanleitung

Divio

Divio NDR155PA Bedienungsanleitung

Canon

Canon VB-C500D Bedienungsanleitung

Easy Access

Easy Access EasyGuard Bedienungsanleitung

Vivotek

Vivotek FD9389-EHV-v2 Bedienungsanleitung

TUYA

TUYA COSMO W2 Bedienungsanleitung

Eusso

Eusso UNC7500-IR Einrichtungshandbuch

urmet domus

urmet domus 1096/204 Bedienungsanleitung

VC VC20 series Bedienungsanleitung

Axis

Axis Q1614 Bedienungsanleitung

ieGeek

ieGeek DD201 Bedienungsanleitung

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Bedienungsanleitung

Vicon

Vicon V662-D-1 Betriebsanleitung

Grundig

Grundig GCH-K0274P Bedienungsanleitung

Lorex

Lorex VANTAGE LBC7032 Bedienungsanleitung

4xem

4xem WPT Bedienungsanleitung

Samsung

Samsung SCV-3082 Bedienungsanleitung

Vitek

Vitek VTC-C544 Bedienungsanleitung