Amerec T100 Bedienungsanleitung

Amerec T100 Steamer Control

For use with AT and 3T steam Generators

4209-53 07-05-12

T100 Steamer Control

Operating Instructions

WARNING

The T100 control operates on 12VDC and does

not present a shock hazard. Electric Shock

Hazard - High voltage exists within the steam

equipment. There are no user serviceable parts

in this equipment. All installation and service to

this equipment should be performed by quali-

ﬁed licensed personnel.

Do not exceed 30 minutes in a steam bath.

Excessive exposure can be harmful to your

health. Excessive exposure can produce a

rapid pulse, light-headedness, weakness or

fainting. If you become uncomfortable or

experience any of the above conditions exit the

steam bath immediately.

Steam baths can put stress on the body.

Therefore a steam bath should be used only

under a doctor's direction if you:

Are pregnant

Have a heart condition

Have high blood pressure

Have circulatory problems

Are under the inﬂuence of alcohol

Are under the inﬂuence of drugs

Have diabetes

Are under the care of a physician

Are in generally poor health

Children should only use the steam bath under

close adult supervision.

Scald Hazard: Do Not Touch the steam head

or trim during operation as they are HOT. Stay

at least 12 inches away from the hot steam

escaping from the steam head.

Be careful when entering a steam bath. Escap-

ing steam from an overheated steam room may

cause injury.

REDUCE THE RISK OF

1. Exit immediately if uncomfortable, dizzy or sleepy. Staying too long in

a heated area is capable of causing overheating.

REDUCE THE RISK OF

Use care when entering or exiting the steam room, floor may be slippery.

NOTE: For additional safety instructions, see owner's manual.

CAUTION!

Do not contact steam head. Stay at least 12" away

from hot steam escaping from the steam outlet.

OVERHEATING AND SCALDING

2. Supervise children at all times.

3. Check with a doctor before use if pregnant, diabetic, in poor health or

under medical care.

4. Breathing heated air in conjunction with consumption of alcohol, drugs

or medication is capable of causing unconsciousness.

SLIPPING AND FALL INJURY

WARNING

FOR THE SAFETY OF YOU AND YOUR FAMILY PLEASE

READ THE WARNINGS TO THE RIGHTANDALL INSTRUC-

TIONS BEFORE USING YOUR STEAMBATH.

POST "WARNING" LABEL OUTSIDE STEAM BATH FOR

SAFETY WARNINGS. POSTING IS REQUIRED ON OR AD-

JACENT TO STEAM ROOM DOOR FORALL COMMERCIAL

INSTALLATIONS.

SAVE THIS MANUAL

Thank you for purchasing your new Amerec steam generator. If we can be of any

assistance do not hesitate to call our Technical Support at 1-800-363-0251.

T100 Steamer Control

Operating Instructions Page 2

4209-53 07-05-12

IMPORTANT SAFETY INSTRUCTIONS

1. READ AND FOLLOW ALL INSTRUCTIONS.

2. WARNING - To reduce the risk of injury, do not permit children to use this product unless they are closely

supervised at all times.

3. WARNING - To reduce the risk of injury:

a. The wet surfaces of steam enclosures may be slippery. Use care when entering or leaving.

b. The steam head is hot. Do not touch the steam head and avoid the steam near the steam head.

c. Prolonged use of the steam system can raise excessively the internal human body temperature and

impair the body’s ability to regulate its internal temperature (hyperthermia). Limit your use of steam to 10 -

15 minutes until you are certain of your body’s reaction.

d. Excessive temperatures have a high potential for causing fetal damage during the early months of

pregnancy. Pregnant or possibly pregnant women should consult a physician regarding correct exposure.

e. Obese persons and persons with a history of heart disease, low or high blood pressure, circulatory

system problems, or diabetes should consult a physician before using a steam bath.

f. Persons using medication should consult a physician before using a steam bath since some medication

may induce drowsiness while other medications may affect heart rate, blood pressure and circulation.

4. WARNING - Hyperthermia occurs when the internal temperature of the body reaches a level several

degrees above the normal body temperature of 98.6°F. The symptoms of hyperthermia include an in-

crease in the internal temperature of the body, dizziness, lethargy, drowsiness and fainting. The effect of

hyperthermia include:

a. Failure to perceive heat:

b. Failure to recognize the need to exit the steam bath:

c. Unawareness of impending risk:

d. Fetal damage in pregnant women:

e. Physical inability to exit the steam bath: and

f. Unconsciousness.

WARNING - The use of alcohol, drugs or medication can greatly increase the risk of hyperthermia.

SAVE THESE INSTRUCTIONS

T100 Steamer Control

Operating Instructions Page 3

4209-53 07-05-12

STEAM GENERATOR

TEMPERATURE SENSOR

T100 CONTROL

STEAM ROOM

T100 CONTROL OVERVIEW

The T100 control is a low voltage wired control for use withAmerec’sAT and 3T series steam generators.

The control requires a shielded cable to connect to the steam generator. Failure to use a properly shielded

cable may result in poor performance! A temperature sensor (required) mounts inside the steam room

and connects to the steam generator.

The T100 uses touch screen switches to move through various menu screens to:

start and stop the steam bath

set or display the bath temperature

choose between °F and °C temperature displays

set the bath run time

set a delayed start time for the steam bath

set and display the time of day

choose the displayed language

control a low voltage room light

Note: The T100 will vibrate gently and a buzzing noise may be heard when a switch is pressed. This helps

the user know that the switch was successfully pressed. This may be turned off if desired -- see the Set-

tings menu instructions on page 8.

T100 Steamer Control

Operating Instructions Page 4

4209-53 07-05-12

Key To Symbols:

Main Menu

1. On/Off

2. Set Temperature

3. Set Bath Run Time and Delayed Start

4. Go to Settings Menu

Navigation Keys

9. Lighting - Room Light On/Off

10. OK - Conﬁrm Selection

11. Navigation Arrows

- Move through menu items or change settings.

12. Home

- Return to Main Menu Screen

13. Back

- Move Back One Menu Item or One Step

(from Main Menu - press to display Status)

Operation Display

5. Keypad Locked

6. Delayed Start On

7. Room Light On

8. Steam Bath On

See Page:

7 - 9

See Page:

T100 Steamer Control

Operating Instructions Page 5

4209-53 07-05-12

T100 CONTROL: OPERATION

To view the T100 display, simply touch the lower half of the glass screen. When you are used to using your control, you’ll ﬁnd

that movement near the switches will light the display without touching it in most circumstances. Be careful not to touch the

control near the OK switch - this may start or stop a steam bath before you are ready.

To navigate through the menus and their options:

Use the up and down arrow navigation keys to move through the menu items to

highlight the one you want, then press to select it.

To back up one step, press the key.

To return to the Main Menu from any menu, press the home key.

Note: at any time, pressing the switch will turn a low voltage room light on or off.

MAIN MENU Select to start or stop the steam bath cycle

TEMPERATURE Select to change the steam bath temperature

TIME Select to change the bath run time or to set and activate the delayed start time

SETTINGS Select to go to the next menu level

OPERATION DISPLAY Located at the bottom of the menu screen, this display shows when certain functions are on or off.

When the key is shown, the keyboard is locked

When the clock is shown Delayed Start is activated

When the light is shown, the room light is switched on

When the On/Off symbol is shown, the steam bath is running

Press the Back key to go back one step while in any menu.

Press the Back key while in the Main Menu to show the Room Status display. When the steam bath is turned off, the the

Status screen shows the current temperature in the steam room, the time of day and the bath time setting. When the

steam bath is on, the bath time counts down while showing the time remaining before the bath is automatically turned off.

RoomTemperature

Time of Day Time remaining before

the bath turns off

Bath Time setting

for automatic turn off

115

07:00am

00:45

06:45am

01:00

T100 Steamer Control

Operating Instructions Page 6

4209-53 07-05-12

TEMPERATURE MENU

Select the Temperature icon to adjust the desired steam bath temperature.

The current steam bath temperature set point is displayed.

Use and navigation keys to scroll the temperature up or down to the

desired setting then press OK.

Default is 115°F (46°C) and the temperature is adjustable to 125°F (51°C)

120

empe

empera

ture

TIME MENU Select the Time icon to adjust the desired steam bath run time or to controll a delayed start.

Select Bathtime Limit to adjust the desired steam

bath run time.

The current steam bath run time setting is

displayed.

Use the navigation keys to change each digit

to its desired setting, then press OK to go to

the next digit.

Default is 1 hour and adjustable up to 24 hours.

The T100 may be set to automatically start the

steam bath at a later time, for example if you

should want the steam bath ready to use when

you get up in the morning.

Select Start Time to adjust the time of day you

want the steam bath to start.

Use the navigation keys to change each digit

to its desired setting, then press OK to go to

the next digit. Remember to set am/pm correctly.

Once the time is set, the delayed start is automatically activated.

When the delayed start option is activated,

the clock symbol will appear at the bottom

of the menu screens.

To turn off the delayed start, go to the Time menu

and select Deactivate then press OK. The clock

symbol will also disappear from the menus.

Choose Activate to turn on the delayed start

again with the same start time.

Note: the selcted Delayed Start time is displayed

in the Time menu.

Bath

time Limit

1:00

tart T

ime

1:00

06:30 pm

ime

Bath

time Limit

tart T

ime

eac

vate

06:30 am

ime

Bath

time Limit

tart T

ime

vate

12:00 am

ime

Bath

time Limit

tart T

ime

vate

12:00 am

ime

Bath

time Limit

tart T

ime

vate

06:30 am

T100 Steamer Control

Operating Instructions Page 7

4209-53 07-05-12

et clock

1:00

SETTINGS MENU Select the Settings icon to adjust the to your personal preferrences.

Select Set Clock to set the time of day.

Use the navigation arrows to change the number

up or down then OK to accept. Use the Back

arrow to move back to the previous digit.

Note: When the clock is set to the 12 hour

display mode, the ﬁrst hours digit cannot be

changed to a 1 if the second digit is 3 or higher.

Select Language to change the language used

in the T100’s display.

Use the navigation keys to highlight the prefered

language then press OK to select.

Select Display to set how long the T100’s

displays will remain lit. To increase the life of

the T100’s display, it will automatically turn off

after a preset time. To set this time:

Press OK to select Sleep (automatically high-

lighted when enterring the Display menu)

Use the navigation arrows to change the sleep

time. The sleep time is set to 15 seconds by

default and is adjustable from 3 to 90 seconds.

Language

English

ens

enska

eutsch

ancais

ettings

et T

ime

Language

Displ

Display

Aut

oma

tic Keylock

ibra

tion

Ser

vice

ettings

et T

ime

Language

Displ

Display

Aut

oma

tic Keylock

ibra

tion

Ser

vice

ettings

et T

ime

Language

Displ

Display

Aut

oma

tic Keylock

ibra

tion

Ser

vice

Displ

Display

Sleep

Sleep D

elay

15s

Sleep

Sleep D

elay

T100 Steamer Control

Operating Instructions Page 8

4209-53 07-05-12

Aut

olock

ime

15s

Aut

olock

ibra

tion

Ent

er c

ode

000

125

et max

et max t

empe

empera

ture

SETTINGS MENU (continued) Select Automatic Keylock to prevent others

from using the T100. WhenAutolock is on, the

display will light but the T100 will not respond to

key presses.

To set Autolock, ﬁrst select Time, then adjust the

desired delay time, then press OK. The delay is

15 seconds by default, adjustable from15 to 60

seconds.

Next select OFF and press OK. Autolock is

now enabled. After the selected delay time has

passed, the keyboard will be locked and the

key symbol will be displayed. Repeat to

turn Autolock off again.

To access the T100 when locked: press the Home and Back keys

at the same time and hold for about 3 seconds. These two keys may also

be used to manually lock the keypad without turning onAutolock.

Select Vibration to change the effect

when a key is pressed.

By default, when a key is pressed on the T100,

there is a small vibration felt and a buzzing sound.

Select Vibration, use the navigation keys to select

On or Off, then press OK to turn this effect on or off.

Select Service to go to the Service menu. The

Service menu allows setting some personal

options and is passcode protected to prevent

unauthorized use.

Select Service then use the navigation keys to

enter the code 124, then press OK to enter the

Service menu.

SERVICE MENU

Select Temperature Limit to adjust maximum

bath temperature setting allowed. By default, the

bath maximum temperature is 125°F (51°C). The

maximum temperature may be adjusted down

from there to any value.

ettings

et Clock

Language

Displ

Display

Aut

oma

tic Keylock

ibra

tion

Ser

vice

ettings

et Clock

Language

Displ

Display

Aut

oma

tic Keylock

ibra

tion

Ser

vice

ettings

et Clock

Language

Displ

Display

Aut

oma

tic Keylock

ibra

tion

Ser

vice

ettings

et Clock

Language

Displ

Display

Aut

oma

tic Keylock

ibra

tion

Ser

vice

Ser

vice

empe

empera

tur

e Limit

empe

empera

tur

e S

cale

ime

ime Format

Cleanup

Factor

y R

eset

est

T100 Steamer Control

Operating Instructions Page 9

4209-53 07-05-12

ettings

Sta

tus

et Clock

Language

Displ

Display

Aut

olock

ibra

tion

Ser

vice

ettings

Sta

tus

et Clock

Language

Displ

Display

Aut

olock

ibra

tion

Ser

vice

Run time

00:00

SERVICE MENU (continued)

Select Temperature Scale to choose the

temperature display units you prefer. Use the

navigation keys to select Celcius or Fahrenheit

then press OK.

Select Time Format to choose the way you want

the time of day clock to display, either from 1 to

12 am and 1 to 12 pm or from 1 to 24 hours.

(ex. 10:00pm = 22:00)

In areas with hard water, the steam generator

may require decalciﬁcation periodically. The T100

may be set to remind you when it is time to do

this.

Select Cleanup then select Cleanup Time to set

the the run time before the T100 notiﬁes you that

decalciﬁcation is scheduled. The run time may be

set from 0 (off) to 100 hours of operation.

When the steam generator has been used for the

number of hours set in Cleanup Time, you will be asked if decaliﬁcation has

been done each time a steam bath is turned on until you respond with yes.

To determine how many hours the steam generator has run since the last

decalciﬁcation, go to the Decalciﬁcation menu and select Run time. The run

time will reset when you respond yes to the decalciﬁcation reminder.

Two additional items are available in the Service menu: Factory

Set and Test.

Factory Set is used as part of the initial T100 set up and is not

available for the user.

Test is used during troubleshooting and should not be used

without factory assistance. Contact Technical Support at

1-800-363-0251 for more information or assistance.

Ser

vice

empe

empera

tur

e Limit

empe

empera

tur

e S

cale

ime

ime Format

Cleanup

Factor

y R

eset

est

empe

empera

tur

e S

cale

elsius

elsius ˚C

ahr

enheit

enheit ˚F

ele

elec

t time

t time format

24 hour

12 hour

Cleanup

Cleanup time

Run time

Cleanup time

40:00

Ser

vice

empe

empera

tur

e Limit

empe

empera

tur

e S

cale

ime

ime Format

Cleanup

Factor

y R

eset

est

Ser

vice

empe

empera

tur

e Limit

empe

empera

tur

e S

cale

ime

ime Format

Cleanup

Factor

y R

eset

est

Andere Handbücher für T100

Inhaltsverzeichnis

Andere Amerec Steuerungssystem Handbücher

Amerec

Amerec K2 Bedienungsanleitung

Beliebte Steuerungssystem Handbücher anderer Marken

Pentair Pool Products

Pentair Pool Products Compool Bedienungsanleitung

ComfortNET

ComfortNET CTK04 Bedienungsanleitung

Fireye

Fireye InSight II 95DSS3 Bedienungsanleitung

CAME

CAME G3000 Bedienungsanleitung

Idemia

Idemia MorphoAccess VP MD Bedienungsanleitung

Axis

Axis P1445-LE-3 Bedienungsanleitung

HEIDENHAIN

HEIDENHAIN TNC 150 B Bedienungsanleitung

CNC-Step

CNC-Step High-Z T-Series Bedienungsanleitung

Doosan

Doosan DVF Series Bedienungsanleitung

Honeywell

Honeywell KAP 140 Bedienungsanleitung

Honeywell

Honeywell vk41 series Bedienungsanleitung

AirBench

AirBench FPW Installationsanleitung

Cypress

Cypress HHR-3160 Bedienungsanleitung

CAME

CAME GLT40AOS Bedienungsanleitung

Zonex

Zonex GEN II -VVT Benutzerhandbuch

Altronics

Altronics K 9650 Bedienungsanleitung

micro-trak

micro-trak RoadMaster Bedienungsanleitung

micro-trak

micro-trak Calc-An-Acre II Bedienungsanleitung