AWPS248 v1942-01
SMART STRIP
USER’S GUIDE FOR MODEL AWPS248
DID THE SMART STRIP FAIL TO CONNECT?
If the app fails to connect to the Smart Strip, it will attempt to connect from your phone’s Wi-Fi settings menu. Android devices
(as below) will do this automatically, Apple products will ask you to exit the app and go to Settings > Wi-Fi. After the
connection is established, proceed as normal to nalize and begin using the Smart Strip.
CONNECT TO THE SMART STRIP,
THEN RETURN TO THE APP.
THE CONNECTION PROCESS
WILL BEGIN IMMEDIATELY.
NOTE THAT IT MAY TAKE A FEW
MOMENTS TO CONNECT.
SELECT AP MODE. PRESS CONNECT NOW TO
PROCEED TO YOUR ANDROID
PHONE’S WI-FI SETTINGS MENU.
APPLE IOS USERS, EXIT THE APP
AND MANUALLY ACCESS YOUR
WI-FI SETTINGS MENU.
SAFETY WARNINGS
• WARNING: To prevent re or shock hazards, do not expose
this unit to rain or moisture.
• Clean only with a dry cloth. Do not clean with liquid cleaners
or damp cloth.
• Do not use with devices that should not be used
unsupervised.
• CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
USE ONLY INDOORS.
• Do not use in a bathroom or other location where it may
come into contact with water or splashing.
• WARNING: Where the mains plug or appliance coupler is
used as the disconnect device, such disconnect device shall
remain readily operable.
• Risk of electric shock. Grounding continuity must be
maintained.
• To prevent injury, this apparatus must be securely attached
to the wall in accordance with the installation instructions.
• The Wi-Fi plug may not work properly if there is radio
frequency interference. You may be required to reset the
Wi-Fi plug should this occur.
FCC WARNINGS
Warning: Changes or modications to this unit not expressly approved by the
party responsible for compliance could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of
the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
DISCLAIMERS
Amped Wireless makes all attempts in providing accurate information on all
media. However, Amped Wireless makes no warranty as to the accuracy of
the information, including representations and warranties about the accuracy
of product specications, marketing material, product availability, new product
launch dates and all other content herein. Amped Wireless reserves the
right to update and change information without prior notice. All information
provided is provided “AS IS” with all faults without warranty of any kind.
Either expressed or implied. Amped Wireless and its suppliers disclaim all
warranties, expressed or implied including, without limitation. Amped Wireless
and its suppliers shall not be liable for any indirect, special, consequential,
or incidental damages including, without limitation, lost prots or revenues,
cost of replacement goods, loss or damage to data arising out of the use or
inability to use any Amped Wireless product, damages resulting from use of or
reliance on information present, even with prior notice to Amped Wireless. All
non-Amped Wireless trademarks, logos, brands and products are trademarks
or registered trademarks of their respective owners. Amped Wireless does
not claim any relation. Mention of non-Amped Wireless products and brands
are for information purposes only and does not constitute an endorsement
or afliation.
Warranty Period: The Amped Wireless Limited
Warranty is for one (1) year from the date of purchase for
new products. Refurbished products carry the Limited
Warranty for thirty (30) days after the date of purchase.
In the event that you have a problem with this product,
please go to www.ampedwireless.com/support.
Elite Support International: +1-909-217-3168
Elite Support Toll Free: 888-573-8820
Website: www.ampedwireless.com
Support Website: www.ampedwireless.com/support
© 2017 Amped Wireless / Newo Corporation. All rights reserved. Amped
Wireless, Newo Corporation, and the Amped Wireless logo are registered
trademarks or trademarks of Newo Corporation. All non-Amped Wireless
trademarks, logos, brands and products are trademarks or registered
trademarks of their respective owners. Amped Wireless does not claim
any relation. Mention of non-Amped Wireless products and brands are
for information purposes only and does not constitute an endorsement or
afliation.
SAFETY & SUPPORT INFORMATION
WARNING: This product can expose you to
chemicals including lead, which is known to the
State of California to cause cancer and birth
defects or other reproductive harm. For more
information go to www.P65Warnings.ca.gov.
This product meets and complies with all
Federal regulations.
