Amperes PD1280 Bedienungsanleitung

Thank you for choosing another quality product from Amperes Electronics.

Amperes has upgraded the protocols in PD series paging microphones, MatriMix as well as PMX system. With this

harmonised data, all the equipments can be used or interchanged seamlessly. As such, the firmware of TD6240 has

been upgraded as well, to cater for the needs.

We shall endeavor to make products with contemporary needs and yet expandable for future upgrades. We are

sure you make the right decision to choose Amperes, which is not only offering the product that meets your budget,

but perform beyond your expectation.

We appreciate that you read through the manual to avoid any mishandling as well as to explore the full potential this

unit can offer. Keep this manual for future reference and we believe that you are getting an optimum product in its

class.

INSTRUCTION MANUAL

PD1280

DIGITAL PAGING MICROPHONE

August 2013

version 1/13

harmonised protocol

amperes

Digital Paging Microphone

PD1280

CLR

ADD

REPEAT CHIME

TALK

F1 F2 F3

GROUP RECALL

SIREN ALL CALL

PAGE 2 amperes electronics

Product Descriptions

Parts Identification

INPUT

OUTPUT

EX2800

rear view

PD1280

Top View

PD1240 and PD1280 shall be the next generation of desktop paging microphones from Amperes. They are

enhanced versions of the popular PD2400 series, featuring soft touch sensor buttons to meet today’s aesthetic

demands.

Common specifications from PD2000 series are included but further improved with better sound delivery, thanks to

the embedded sound processor. Features available include priority level assignment, multipoint paging setup,

chime and microphone volume controls as well as illuminated gooseneck microphone.

The search for contemporary design with unsurpassed features ends with PD1280. It is suitable for large scale

installations, of up to 256 zones, multi point paging stations with 9 priority levels, soft touch buttons and big LCD

graphic panel for ease of monitoring and programming.

TO PD1280

MIC

CHIME

POWER + AUDIO + DATA

POWER

12 13

QUANTUM PAGING SERIES

amperes

Digital Paging Microphone

PD1280

CLR

ADD

REPEAT CHIME

TALK

F1 F2 F3

GROUP RECALL

SIREN ALL CALL

amperes

PD1280 Digital Paging Microphone PAGE 3

Parts Identification

1. PAGING MICROPHONE INLET

XLR inlet for gooseneck microphone. Use only condenser microphone supplied or those operates under 3 to 9 V.

2. LCD DISPLAY

Factory default display is with back light. User has the option to turn off. Please refer to setup section.

3. GROUP RECALL

It is used for programming & recall zone grouping during G1 ~ G8 button.

4. SIREN BUTTON

Press this siren button the LCD shall show the ‘Siren Active’, after that press the ‘Chime & Talk’ button shall activate

the EP1200A to siren mode.

5. ALL CALL BUTTON

Mic shall be activated instantly without chime, triggering all normal zones. Note that making ALL CALLs will not trigger

the overriding relay at the zone selectors, thus the volume controllers set at minimum shall not be overrided.

6. F1 ~ F3 BUTTON

This button for future add-on other function.

7. KEYPAD

Zone selections and programming are done via these keypad.

8. REPEAT BUTTON

Press repeat button for recall previous zone selection.

9. CHIME AND TALK BUTTON

Select the zones required before pressing this button. A chime shall start (if selected) and followed by mic activation,

which is indicated by the illuminated ring at the microphone.

10. GOOSENECK MICROPHONE

This detachable condenser mic comes with illuminated ring when the mic is in active mode and ready for paging.

11. CHIME & MIC VOLUME CONTROL

Individual volume for chime and microphone output level can be adjusted according to site requirement.

12.OUTPUT CONNECTION

Connet the RJ45 cable to EX2800 for power, data and audio. If the paging mic is located near the decoder at the rack

(within 50m), the cable can be connected directly to TD6240 / TD6080 / MxP2188 without using EX2800.

13. POWER SWITCH

Switch for 24V power to unit..

16. PAGING MIC CONNECTION (EX2800)

Connect to the paging mic via this RJ45 connector. For pin configuration, refer to the diagram.

14. DATA / AUDIO OUTPUT (EX2800)

Data and audio are linked to TD6240 decoder unit using 2 pair screen cable. Please refer to ‘ Connecting the Unit’ for

detailed connection diagram.

15. DATA / AUDIO INPUT LINK / DC SUPPLY (EX2800)

Data and audio from other EX2800 (if any) are fed to this port forming a circuit. This connection is applicable only if

multipoint paging setup is establised. Use a DC24V power adaptor supplied for powering the unit.

PAGE 4 amperes electronics

Application Schematic

PD1280 Paging Mic

Unit 1

PD1280 Paging Mic

Unit 2

PD1280 Paging Mic

Unit 3

EX2800

5 12 1Z S

P OW ER

M AST ERS OU RCEC H5 C H6C H4C H3C H1 C H2

MX 2 12 2 O

P OW ER

Q P2 500

50 0W 1 00 V LI NE POWER AMPLIFIER

EX2800

24V 24V

24V

TD6240 Zone

Decoder

MX2222

Pre-Amp Mixer Speaker Zone

Selector

Speakers in Various Zones

Power Amplifier

Please ensure that priority level

is set at each paging console

before operating.

Each loop / circuit may consist

of several paging mics, which

can be set at different priority

level.

Termination at TD6240 decoder

can be done at any of the

connection port, without priority

setting restriction at the

console.

Cat5e

2P Screen

Triggering signalaudio output

(balanced)

100V

Other complementary equipment may be required in the system such as :

EP1200 for Emergency Paging and overriding

AX3700 / AX700 /AC3601 Amplifier Changeover Panel for standby amp fault changeover

BC9730 / PS9400 Battery Charger and Power Supply

VR7600 Zone Volume control panel

Note on priority setting :

If the system consist of several paging mic with same priority ;

The one activated earlier shall remain active and the other shall remain in busy mode. It is as first come first serve

mode.

If the system consist of several paging mic with different priority :

The one with higher priority shall override the unit with lower priority even though the latter is in paging mode.

If lower priority unit would have busy LED blinking when the higher priority is active.

Priority 1 ( highest ) .......... Priority 9 ( lowest )

amperes

PD1280 Digital Paging Microphone PAGE 5

TX RX

FX TX

FDX/PWR

Col

100

Link/

Act

PD1280

iPX5150 iP CLIENT

Fiber Optic Converter

TX RX

FX TX

FDX/PWR

Col

100

Link/

Act

Remote Connectivity via Fiber

DC V

ON/OFF 10BASE-T

ETHERNET RS232

12V-24V

ETHERNET PAGING MANAGEMENT SERVER

ETHERNET ADDRESS : ETHERNET SUBNET : ETHERNET GATEWAY :

amperes

iPx 5100

MAC ADDRESS :

SERIAL NO :

RESET

Quality Product From

AMPERES ELECTRONICS

Network Switch

iPX5150 iP CLIENT

iPX5100 iP SERVER

BG M 2

MxP2188 MATRIX MIXER

MIC

CHIME

POWER + AUDIO + DATA

POWER

QUANTUM PAGING SERIES

The Diagram shows the connectivity using Fiber Optic for long distance mic connectivity with IP setup. Multipoint

paging setup is possible and the paging mic shall operate in similar manner as of using conventional system.

SM / MM fiber connection

PAGE 6 amperes electronics

Connecting The Unit

For Single unit paging mic, set

priority level to 0 (PD1280)

Priority 1 is highest.

Cat5e cable (supplied)

EX2800 External

Conn Unit

Rear view of PD1280

24V DC via

power adaptor

Remote location

2 pair screen cable

(audio output and RS485 data)

1Paging mic can be connected to any of the port regardless of the priority setting at the paging console.

INPUT

OUTPUT

To mixer input ; select either mic or line

level, balanced signal

2Use this switch to select the audio output level ; mic or line level when connecting to pre-amplifier mixer

Remote triggering using Cat5e /

multicore cable via RJ45 jack.

(Cable provided )

24V DC

24V DC24V DC

Fr. EP1200 for E/M

24V overriding

signal triggering

and ALL CALL

parallel connections

for this port

repeat for every zone

Fr.Amplifier

To speakers

(or via VR / LS4600)

ZS5121 (Z1-12)

ZS5121

(Z13 - Z24)

3Set unit address ; each address represents one unit of decoder of 24 zones.

example : 10000 0000 - Zone 1 to 24

01000 0000 - Zone 25 to 48

RLY

TRIG RLY

CON ZS

PR RLY

TRIG RLY

CON ZS

Link to

Next ZS

MIC

CHIME

POWER + AUDIO + DATA

POWER

QUANTUM PAGING SERIES

amperes

PD1280 Digital Paging Microphone PAGE 7

Connecting to IP Paging System

Rear view of PD1280

MIC

CHIME

POWER + AUDIO + DATA

POWER

QUANTUM PAGING SERIES

iPX5150

CLIENT

RS485 Audio

o/p

DC V

ON/OFF 10BASE-T

ETHERNET RS232

12V-24V

ETHERNET PAGING MANAGEMENT SERVER

ETHERNET ADDRESS : ETHERNET SUBNET : ETHERNET GATEWAY :

amperes

iPx 5100

MAC ADDRESS :

SERIAL NO :

RESET

Quality Product From

AMPERES ELECTRONICS

iPX5100 SERVER Network Switch

iPX5150

CLIENT

RS485 Audio

o/p

TD6240 ZONE DECODER

MX2222

Pre-Amp Mixer Speaker Zone

Selector

Speakers in Various Zones

Power Amplifier

Triggering signal

100V

PIN 8-PR

PIN 7-AC

PIN 6-Z6

PIN 5-Z5

PIN 4-Z4

PIN 3-Z3

PIN 2-Z2

PIN 1-Z1

PIN 8-GND

PIN 7-AC

PIN 6-Z1 2

PIN 5-Z1 1

PIN 4-Z1 0

PIN 3-Z9

PIN 2-Z8

PIN 1-Z7

DC 24V CON

RLY

TRIG

RLY

----------------------------------------------------------------------------------------------------------

LOCAL

REMOTE

TD6240 ZONE DECODER

MX2222 PRE-AMP MIXER

Speaker Zone

Selector

100V

PIN 8-PR

PIN 7-AC

PIN 6-Z6

PIN 5-Z5

PIN 4-Z4

PIN 3-Z3

PIN 2-Z2

PIN 1-Z1

PIN 8-GND

PIN 7-AC

PIN 6-Z12

PIN 5-Z11

PIN 4-Z10

PIN 3-Z9

PIN 2-Z8

PIN 1-Z7

DC 24V CON

RLY

TRIG

RLY

POWER AMPLIFIER

Speakers in Various Zones

Triggering signal

audio output

PAGE 8 amperes electronics

INPUT

OUTPUT

INPUT

OUTPUT

INPUT

OUTPUT

INPUT

OUTPUT

24V DC

Cat5e

EX2800

TD6240

2 nos Paging Mic in same circuit.

Note :

Can be set to either different priority or same level.

PD1280

2 pair screen cable

1. Data A

2. Data B

3. Audio +ve

4. Audio -ve

5. Screen - Ground

Cable Size shall be according to the distance from the

paging mic and the equipment rack.

Connecting The Unit ( Multi Point )

MIC

CHIME

POWER + AUDIO + DATA

POWER

QUANTUM PAGING SERIES

MIC

CHIME

POWER + AUDIO + DATA

POWER

QUANTUM PAGING SERIES

MIC

CHIME

POWER + AUDIO + DATA

POWER

QUANTUM PAGING SERIES

MIC

CHIME

POWER + AUDIO + DATA

POWER

QUANTUM PAGING SERIES

2P Screen

amperes

PD1280 Digital Paging Microphone PAGE 9

Connecting to MatrixMix MxP2188

Since that MxP2188 MatriMix system is capable to cater for larger quantity of zones ( 8 input to 128 outputs ),

PD1280 has to be used as the paging mic for the system. More than one PD1280 can be installed.

There is some minor difference when using PD1280 in Matrix environment as compared with the conventional

one :

- EX2800 shall be replaced by EX1103 ( if more than one PD1280 is installed )

- Direct connection to MxP2188 if only one PD1280 and one Matrix is used.

- Power directly from MxP2188 ( length do not exceed 50 m )

- MS1103 to be used if more than one Matrix controller is installed.

An illustration of two PD1280 connected to two MxP2188.

EX1103

Mic Extender

MS1103 Mic Splitter

MxP2188

(Master)

Zone 1 to 8

MxP2188

(Slave)

Zone 9 to 16

PD1280 Unit 1

PD1280 Unit 2

Cat5e

Link RS485

connections Link local mic

(if applicable)

Power for PD1280 is drawn directly

from MxP2188 via Cat5e cable.

Note :

Length shall not exceed 50 m, to

avoid voltage drop as well as noise

to audio line.

Setting up for the mic shall be similar to

conventional setup as illustrated in the next

pages.

PAGE 10 amperes electronics

Unit Startup

Device Int..

Remote MIC

Upon powering, the LCD display shall show ‘Device Initialising’.

Mic is ready for paging.

Setup Menu

CLR

ADD

F1 F2 F3

1) Press “0” button momentarily ( 3 seconds )

to enter Setup mode

2) Press “Add” button for next

3) Press CLR for Exit setup mode

When using for the first time, a sample setup is required such as:

1) Setting priority level

2) Optional setting for chime output, grouping, time out etc.

Inhaltsverzeichnis

Andere Amperes Mikrofon Handbücher

Amperes

Amperes PM1060 Bedienungsanleitung

Amperes

Amperes iPD1280 Bedienungsanleitung

Amperes

Amperes PM1000 Bedienungsanleitung

Amperes

Amperes PD1240 Bedienungsanleitung

Amperes

Amperes PD2400 Bedienungsanleitung

Amperes

Amperes iPD1280 Bedienungsanleitung

Amperes

Amperes PM1010 Bedienungsanleitung

Amperes

Amperes PD1900 Bedienungsanleitung

Amperes

Amperes iEP1202 Bedienungsanleitung

Amperes

Amperes PD2400 Bedienungsanleitung

Amperes

Amperes EP1200A Bedienungsanleitung

Amperes

Amperes iEP1202 Bedienungsanleitung

Amperes

Amperes PM1000 Bedienungsanleitung

Amperes

Amperes PM 1060 Bedienungsanleitung

Amperes

Amperes PM 1000 Bedienungsanleitung

Amperes

Amperes PM1060 Bedienungsanleitung

Amperes

Amperes PD2800 Bedienungsanleitung

Amperes

Amperes PD2800 Bedienungsanleitung

Beliebte Mikrofon Handbücher anderer Marken

IK Multimedia

IK Multimedia iRig Stream MIC PRO Bedienungsanleitung

DAPAudio

DAPAudio RM-101 Bedienungsanleitung

AKG

AKG CHM 21 Bedienungsanleitung

Sennheiser

Sennheiser evolution wireless series EM 100 Bedienungsanleitung

Sony

Sony C-48 Bedienungsanleitung

GIGAMEDIA

GIGAMEDIA GGM PAMICUHFG Bedienungsanleitung

Shure

Shure WH30TQG Bedienungsanleitung

auna PRO

auna PRO MIC-900 Bedienungsanleitung

AKG

AKG D 3800 Bedienungsanleitung

Shure

Shure KSM141 Bedienungsanleitung

MAIIN SOUND

MAIIN SOUND IIN style Bedienungsanleitung

Earthworks

Earthworks TC25 Bedienungsanleitung

Sennheiser

Sennheiser evolution D1 Bedienungsanleitung

Alesis

Alesis MicLink Wireless Bedienungsanleitung

DSPPA

DSPPA D6234 Bedienungsanleitung

Monacor

Monacor IMG STAGELINE ECM-300B Bedienungsanleitung

Ansr Audio

Ansr Audio Scan16 Bedienungsanleitung

Shure

Shure MXA710 Series Bedienungsanleitung