Amperes IPX5400 Bedienungsanleitung

INSTRUCTION MANUAL

iPX5400

Ethernet Transceiver

Thank you for choosing another quality product from Amperes Electronics.

Introducing another product for the convenience of installation when it is required to send audio / data from a distance

away. iPX5400 is a transceiver unit, which is able to operate in duplex mode ( paging ), works in pair in LAN environment

or connected directly via UTP cable or Fiber through a converter. It is a simple device allowing peer to peer communication

without the need to employ full IP solutions in your system.

Among applications includes :

- Sending audio from Guard House's paging mic to main system at a distance away through fiber link thus reducing the

risks of lightning surge

- Rack to rack audio / data transmission through existing LAN, thus avoiding the need to lay new cables

- Apply it with wireless AP for areas where laying of new cables are not feasible.

VER 2 / 2020

Parts Identification

PAGE 2 iPX5400 | ETHERNET TRANSCEIVER

1. INDICATOR LEDS

LEDs for Power, Server, Status and Streaming.

2. POWER PORT

24V DC power supply input.

3. ETHERNET PORT

Ethernet Port for connection to network switch.

4. RESET BUTTON

Button for resetting the unit to factory default. Use only when required as setting done previously would be lost.

5. RELAY CONTACT

This ports provide a dry contact which can be used to connect E/M overriding signal or activate ALL CALL at

speaker zone selector.

6. EXTERNAL MESSAGE TRIGGER PORT

Ethernet message player can be linked to it and can be broadcasted to the speakers when this port is triggered.

A voltage free contact is recommended to trigger the message playback.

7. RS485 PORT

For data Transmission (RS485) from PD paging mic or output data for TD6240 / 6080 controls.

8. SIGNAL INDICATOR

LED to indicate audio signal’s presence.

9. MIC AUDIO INPUT

Audio input signal from paging mic with balanced line level.

10. AUDIO OUTPUT PORT

Audio output from client for connection to mixer, etc with balanced line level.

Front View Rear View

9 10

iPX5400 | ETHERNET TRANSCEIVER PAGE 3

Connecting to iPX5400

2. Connecting PM1000 mic to iPX5400 with dry contact activation

Normal mic such as PM1000 can use to transmit with a dry contact as activation key. At the receiving end, there shall be audio

output for link to mixer, etc and another dry contact for other general purpose. An example is to use a handheld mic as emer-

gency mic at guard house to trigger an ALL CALL at system rack for emergency announcement.

Application Example : Peer to Peer Direct Connectivity

PD Series Mic

Main PA Rack

Cat5e / Cat 6 ( crossed ) or

Fiber optic cable via LAN - FO converter

or through existing

LAN

Music Player

24V DC Power

Speakers

iPX5400

24V OR Contact if applicable

AMPLIFIERMONIT O R

AMPLIFIEROUTPUT LEVELMETER ( dB)

AMPLIFIEROUTPUT SIGNAL

8 9

711 12

OFF MAX

MONITORVOLUME

AMPLIFIERSELE C T

654321

-10 -5 0 3 6

AM4120 amperes

TEST MIC

EMERGENCY P A G ING PANEL

SIRENACTIVATE

POWER

FIR E

amperes

AM6000

PT1800 amperes

WEEKLYPR OG R AM TIMER

CH5 CH6CH3 CH4 CH7 CH8 STAT USWEST

RELAYOUTPUT CONTACT MELODY

CH1 CH2

ENTER DOWNUP

ACTIVEDATA

POWER

PRIORITY1

PRIORITY2

24CHDATA DE C O DE R/RECEIV E R

amperes

TD6240

VR7000

1 1

6amperes

ZS5602 amperes

BGM/PAGING ZONESELEC T OR

21 3 54 6 1 2 3 4 65 ALLCAL L

BACKGROUNDMUSI C PAGINGZONESE L E CT IO N

amperes

BP2000

BLANKPANEL

POWER

OFF S E L E CT

TUNER

CASS

OFF

MASTER

MUSICSOURCE

SIGIN

BASS

MAXMIN

EXTINPUT

MAX MAXMIN

SOURCE

MIN

SIGIN

CHIME MIXER TR E B LE

MAXMIN

TONECTRL

CH5 CH6CH4

SIGINSIGIN SIGIN

MAXMIN MAXMIN MIN

CH3CH1 CH2

SIGINSIGIN

MAXMIN MAXMIN MA XMIN MAX

AUX

SIGIN

PREAMPLIFIE R MIXER

amperes

MX2222 O

CH1 CH2 CH4CH3 CH5 CH6

STATUS

MENU ENTER NEXTPRE

BUZZER

NORMAL

FAULT

SPEAKERLI NE SURVEILLANCE

LS4600 amperes

BATTERY

9400

REGULATEDDC POWERSU P P LY

DCOUT

MAINS

POWER

amperes

STANDBYAMPLIF IE R CHANGEOVER

STANDBYTAKEOVER

NORMAL

AC3601 amperes

21 3 54 6

AUTOSTANDBY AMPCHANGEOVE R

FAULT

STANDBY

5 64321

ON/OFF

BUZZER

AMP/LINE

ALERT

FAULT

AMP.FAULT/LINE GND

AMP.NUMBER

AMP.OPERATIONAL

AX700

amperes

MxP2188

MONITORSPEA KE R

LOCALPAGE Z ON E

t11.25;SPEAKERVOLUME

MONITORALL

EMER

DOWN

PRE NEXT

PAGE

ZONE5

ZONE6

ZONE7

ZONE8ZONE4

ZONE3

ZONE2

ZONE1

MatrimixPaging

8x8MATRIXMIXE R

VP1000 amperes

VENTPANEL

amperes

POWER

DOWN

uantum

2000SERIES

QP2500

500WPOWER AMP L IF IE R

ACTIVEDATA

POWER

PRIORITY1

PRIORITY2

8CHDATAD E C O DE R /ZONESE L E C T OR

amperes

TD6080

OVERRIDE

21 3 54 6 7 8 ALLC AL L

VOLUME

HEADPHONE

MONITORSPEA KE R

MP3/CDPL AY E R /TUNER

POWER

CD1001

amperes

APS SCAN

MEMORY BAN

RESET

MUTE SOURCE

SHUF RPT

AX3700

AMPLIFIERAUTO FAULTCHANGE O V E R

AMP.FAULT

AMP.CHANGEOVER

AMP.NORMAL

5 64321 6

PILOTTONE

STANDBYAMP.F AULT

AMP.NUMBER

ON/OFF

BUZZER

AMP/LINE

ALERT

FAULT

PILOTTONE

STANDBYAMP.F AULT

ON/OFF

BUZZER

AMP/LINE

ALERT

FAULT amperes

amperes

POWER

DOWN

uantum

2000SERIES

QP2500

500WPOWER AMP L IF IE R

amperes

POWER

DOWN

uantum

2000SERIES

QP2500

500WPOWER AMP L IF IE R

audio &

data

audio only

24V DC Power

Audio to

Mixer

RS485 for Zone

Controls

Remote Location such as Guard

House, Reception etc

iPX5400

1. Connecting PD series paging mic to iPX5400

This is usually applied when is required to install a paging microphone a distance away from the rack such as guard house,

remote office or at different building.

Audio ( line level output ) and RS485 output shall be connected to iPX5400 as per diagram below, and at the receiving end,

audio shall be fed to mixer and the RS485 data shall go to TD decoder for zone activation. In this mode, duplex operation is

allowed.

3. Transmitting Music via iPX5400

iPX5400 allows high quality music audio to be transmitted via existing LAN or fiber optic. They works in pair at simplex mode.

Analogue input to iPX5400 shall be assigned as transmitter and the other end as receiver.

iPX5400

Amp / Mixer

Decoder

data

audio

Cat5e / Cat 6 ( crossed ) or

Fiber optic cable via LAN - FO

converter or through existing

LAN

PD Series Mic iPX5400

data AB

EX2800

audio

7 9

PM1000 Mic

iPX5400

PM1000

amperes

PAGINGMICROPHONE

CHIME&TALK

PUSHTOTALK

audio

remote trigger

iPX5400

Amp / Mixer

24V or contact if applicable

Cat5e / Cat 6 ( crossed ) or

Fiber optic cable via LAN - FO

converter or through existing

LAN

69510

Music Player

iPX5400

audio

iPX5400

Amp / Mixer

audio output

Cat5e / Cat 6 ( crossed ) or

Fiber optic cable via LAN - FO

converter or through existing

LAN 10

Device Setup Via Browser

PAGE 4 iPX5400 | ETHERNET TRANSCEIVER

iPX5400 shall require some simple setups, kindly follow the step by step instructions as listed below. The unit shall be con-

nected to LAN network to form a complete system. The default IP address is 192.168.0.100. Login page shall appear and

the default User ID and Password are both “admin”.

Info / Main Page

Info: Providing hardware, network and Application

information. This shall be the first page once you

entered the system’s http browser.

Network Configuration: For configuration of

IP address and its related ports.

System configuration: For Application

Settings.

Network Configuration

Unless required, you are recommended to change

the IP address only, leaving other setting such as

port number as default. Once the address has

been changed to suit the environment, click the

“Save Changes” button.

Hardware Information

Firmware Version

Hardware Revision

Serial Number

Device Name

Network Information

IP4 Address

Subnet Mask

Gateway Address

Application Information

Linked To

Data Port

MAC Address

Network Settings

IP4 Address

Subnet Mask

Gateway Address

Application Settings

Data Port

iPX5400 | ETHERNET TRANSCEIVER PAGE 5

Device Setup Via Browser

Device Name

Connection Mode

Remote IP

Volume

Bass

Treble

Web Page Theme

Application Settings

System Configuration

Application Settings:

Device Name: We can give a meaningful name to this device.

e.g: GndFlr Paging Mic

Connection Mode: ( Reserved for future enchancement )

NOTE:

Remote IP: At transmitting end this field is key in with receiv-

ing end iPX5400 IP address. At receiving end, leave this box

blank.

Volume / Bass / Treble: Adjust the paging / music volume /

bass / level. Please adjust the levels at receiving end

iPX5400.

Web Page Theme: Select a desired web page theme here.

Authentication: You can alter the user name and pass-

word to avoid unnecessary access to the system.

Firmware Update: Firmware is stored in the unit’s

memory. Should there be any updates available, use this

section to perform system upgrades accordingly.

Authentication

New User Name

Old Password

New Password

Confirm Password

Firmware Update

File No file chosen

PAGE 6 iPX5400 | ETHERNET TRANSCEIVER

Firmware Update

Click the Upload Firmware button to find the

updated firmware file. Find the updated firmware file.

Ready to upload, click Upload

button to upload the firmware.

Updating progress

After finish updating firmware, the browser automati-

cally restart.

IPX5400.acfr

System firmware shall be updated once in a while when new features are available or to fix bugs. There are 2 methods of

doing;

1. Open a browser and type in the iPX5400 IP Address.

2. Under “System Configuration” page look for “Firmware Update” section as shown in below.

Update firmware in Normal Operation Mode:

Click “Choose File” and choose a binary file with “acfr” extension. Click

“Update”.

Firmware Update

File

Once the update is completed, the browser should enter the login page.

IPX5400.acfr

1. Press & hold the reset button until “ STREAMING ” LED is turned ON. This will set the IP address to default address

192.168.0.100.

2. Press & hold the reset button untill “STATUS” LED is turned ON. This will make iPX5400 enter bootloader mode.

3. Open a browser and enter the IP address 192.168.0.100. A web page as shown below shall appear.

4. Select “ Upload Firmware ”, choose a binary file with “ .acfr ” extension and click “UPLOAD”

5. Once the uploading is completed, the browser shall enter the login page.

Update firmware in Bootloader Mode:

If the iPX5400 “hanged”, it is required to perform system reset by :

iPX5400 | ETHERNET TRANSCEIVER PAGE 7

Summary of Features

Note:

The above specifications are correct at time of printing but subjected to changes without prior notice due to product

improvements.

Technical Specification

Low latency audio and data transceiver

RS485 and voice at full duplex ; music audio at simplex

IP Paging server / network switch not required

Supports automatic link crossover

Setup via browser, controlable via PMX software

Supports 3 modes ;

- Always On

- On on remote trigger or through API

- On on paging data ( transmits during paging, siren activation )

•

Power requirement :

Voltage

Current

Connectivity

- Interface

- Common protocols

- Communication protocols

Audio

- Analogue in/out (peak-to-peak)

- Total harmonic distortion (THD)

- S/N ratio (full scale signal)

- Conversion format

Data

User interface

Case :

Dimension (WxHxD)

Weight

12 - 24V DC (Normal DC 24V)

<100 mA

RJ-45 (10/100T Base - TX), 2-way Mini Phoenix (RS485)

TCP/IP, UDP, IGMP, HTTP

UDMP, ADP

100 x 147 x 40 mm

320 g

1.25V (line)

0.1%

83 dB

WAV PCM 48KHz 16 Bit ( Bidirectional & Half Duplex )

UART RS485 ( Bidirectional & Full Duplex )

IE Ver 9 and above, Firefox, Google Chrome (preferred)

Warranty Conditions

Disclaimer

AMPERES ELECTRONICS SDN BHD

MADE IN MALAYSIA

Published : AUGUST 2020

ISO 9001: 2008

Design & Manufacture of Public Address Equipment and Systems

Certicate No. 16895 / A / 0001 / UK / En

Only Amperes Electronics Service Centres are allowed to make warranty repairs : a list of Amperes

Electronics Service Centres may be asked for by the purchaser or send directly to Amperes Electronics Sdn

Bhd at 70 Jalan Industri PBP 3, Tmn Perindustrian Pusat Bandar Puchong, 47100, Puchong, Selangor,

Malaysia or its authorized dealers. This warranty is not valid if repairs are performed by unauthorized

personnel or service centres.

This warranty covers only repairs and replacement of defective parts ; cost and risks of transportation as

well as removal and installation of the product from the main system are for the account of the purchaser.

This warranty shall not extend to the replacement of the unit.

This warranty does not cover damages caused by misuse, neglect, accident of the product as well as using

the product with power supply voltage other than shown on the product, or any other power supply source /

adaptor not recommended by the manufacturer.

This warranty does not cover damages caused by fire, earthquakes, floods, lightning and every cause not

directly related to the unit.

This warranty does not include any indemnity in favor of the purchaser or the dealer for the period out of use

of the unit; moreover the warranty does not cover any damages which may be caused to people and things

when using the product.

This warranty certificate is valid only for the described product, and is not valid if modifications are made on

this certificate or on the identification label applied on the product.

This warranty covers all the material and manufacturing defects and is valid for a period of 36 months from

the date of purchase or for a specified period in countries where this is stated by a national law. In this case,

the extension is valid only in the country where the product is purchased.

Amperes Electronics Sdn Bhd is not obliged to modify previously manufactured products under warranty if

the design changes or improvements are made.

Information contained in this manual is subject to change without prior notice and does not represent a

commitment on the part of the vendor. AMPERES ELECTRONICS SDN BHD shall not be liable for any loss

or damages whatsoever arising from the use of information or any error contained in this manual.

It is recommended that all services and repairs on this product be carried out by AMPERES ELECTRONICS

SDN BHD or its authorized service agents.

AMPERES series must only be used for the purpose they were intended by the manufacturer and in

conjunction with this operating manual.

AMPERES ELECTRONICS SDN BHD cannot accept any liability whatsoever for any loss or damages

caused by service, maintenance or repair by unauthorized personnel, or by use other than that intended by

the manufacturer.

Inhaltsverzeichnis

Andere Amperes Transceiver Handbücher

Amperes

Amperes iPX5400 Bedienungsanleitung

Beliebte Transceiver Handbücher anderer Marken

Yaesu

Yaesu FT-7B Bedienungsanleitung

Kenwood

Kenwood ProTalk TK-3201 Bedienungsanleitung

Texas Instruments

Texas Instruments TLK10232 Bedienungsanleitung

Mizuho

Mizuho MX-2 Produkthandbuch

Kenwood

Kenwood TK-3180 Bedienungs- und Wartungshandbuch

Blitz

Blitz MJ-398U Bedienungsanleitung

Utilicom

Utilicom LongRanger 2050 Bedienungsanleitung

Standart

Standart HX290UKA Bedienungsanleitung

Altronix

Altronix Pace1PTM Bedienungsanleitung

Kirisun

Kirisun PT2208 Bedienungsanleitung

ELECRAFT

ELECRAFT KX2 Bedienungsanleitung

Zodiac

Zodiac K3 Bedienungsanleitung

Assa Abloy

Assa Abloy SecureComm HKC GSM-WIFI U Bedienungsanleitung

Kenwood

Kenwood TK-2217 Bedienungsanleitung

Siemens

Siemens PSO 4000 Bedienungsanleitung

Kenwood

Kenwood TS-590SG Bedienungsanleitung

Midland

Midland G8E-BT Handbuch

ComNav

ComNav Mariner X2 Bedienungsanleitung