Amprobe AM-500 Bedienungsanleitung

AM-500

Autoranging

Mulitmeter

AM-500-EUR

Digital

Multimeter

Users Manual

• Mode d’emploi

• Bedienungshandbuch

• Manuale d’uso

• Manual de uso

• Gebruikershandleiding

• Podręcznik użytkownika

• Användarhandbok

• Brukerhåndbok

• Käyttöohje

• Manual do utilizador

• Brugervejledning

AM-500

Autoranging Mulitmeter

AM-500-EUR

Digital Multimeter

Users Manual

8/2012, 4275548 A

English

Limited Warranty and Limitation of Liability

Your Amprobe product will be free from defects in material and

workmanship for one year from the date of purchase, unless

local laws require otherwise. This warranty does not cover fuses,

disposable batteries or damage from accident, neglect, misuse,

alteration, contamination, or abnormal conditions of operation

or handling. Resellers are not authorized to extend any other

warranty on Amprobe’s behalf. To obtain service during the

warranty period, return the product with proof of purchase to an

authorized Amprobe Service Center or to an Amprobe dealer or

distributor. See Repair Section for details. THIS WARRANTY IS YOUR

ONLY REMEDY. ALL OTHER WARRANTIES - WHETHER EXPRESS,

IMPLIED OR STAUTORY - INCLUDING IMPLIED WARRANTIES OF

FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY, ARE

HEREBY DISCLAIMED. MANUFACTURER SHALL NOT BE LIABLE

FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL

DAMAGES OR LOSSES, ARISING FROM ANY CAUSE OR THEORY.

Since some states or countries do not allow the exclusion or

limitation of an implied warranty or of incidental or consequential

damages, this limitation of liability may not apply to you.

Repair

All test tools returned for warranty or non-warranty repair or

for calibration should be accompanied by the following: your

name, company’s name, address, telephone number, and proof of

purchase. Additionally, please include a brief description of the

problem or the service requested and include the test leads with

the meter. Non-warranty repair or replacement charges should be

remitted in the form of a check, a money order, credit card with

expiration date, or a purchase order made payable to Amprobe®.

In-Warranty Repairs and Replacement – All Countries

Please read the warranty statement and check your battery before

requesting repair. During the warranty period any defective

test tool can be returned to your Amprobe® distributor for an

exchange for the same or like product. Please check the “Where to

Buy” section on www.amprobe.com for a list of distributors near

you. Additionally, in the United States and Canada In-Warranty

repair and replacement units can also be sent to a Amprobe®

Service Center (see address below).

Non-Warranty Repairs and Replacement – US and Canada

Non-warranty repairs in the United States and Canada should be

sent to an Amprobe® Service Center. Call Amprobe® or inquire at

your point of purchase for current repair and replacement rates.

In USA: In Canada:

Amprobe Amprobe

Everett, WA 98203 Mississauga, ON L4Z 1X9

Tel: 877-AMPROBE (267-7623) Tel: 905-890-7600

Non-Warranty Repairs and Replacement – Europe

European non-warranty units can be replaced by your Amprobe®

distributor for a nominal charge. Please check the “Where to Buy”

section on www.amprobe.com for a list of distributors near you.

European Correspondence Address*

Amprobe® Europe

Beha-Amprobe GmbH

In den Engematten 14

79286 Glottertal, Germany

Tel.: +49 (0) 7684 8009 - 0

www.beha-amprobe.com

*(Correspondence only – no repair or replacement available from

this address. European customers please contact your distributor.)

AM-500 Autoranging Mulitmeter

AM-500-EUR DIY-PRO Digital Multimeter

1LCD Display

2SELECT Button

3DATA HOLD Button

4Rotary Switch

5Input Terminal for voltage, diode, resistance and

continuity measurement

6Input Terminal for battery test and AC/DC mA or μA

measurement

7Input Terminal for AC/DC A measurement to10A

8COM (return) terminal for all measurements

1The Meter selects the range with best resolution

2Direct Current

3Alternate Current

4Negative reading

5Data hold

6Diode test

7Continuity test

8Measurement units for resistance test

9Measurement units for voltage test

10 Measurement units for current test

11 Low battery indicator

12 Battery Test

Screen Display

1 6 7

CONTENTS

SYMBOLS............................................................................ 2

SAFETY INFORMATION ...................................................... 2

UNPACKING AND INSPECTION .......................................... 4

FEATURES............................................................................ 4

MAKING MEASUREMENT .................................................. 5

Rotary Switch Positions.................................................. 5

SELECT Button................................................................ 6

DATA HOLD Button........................................................ 6

Auto Power OFF............................................................. 6

Measuring AC and DC Voltage...................................... 6

Measuring Resistance .................................................... 7

Measuring Continuity.................................................... 7

Measuring Diode............................................................ 8

Battery Test..................................................................... 8

Measuring AC and DC Current...................................... 9

SPECIFICATION.................................................................... 10

MAINTENANCE AND REPAIR ............................................. 14

BATTERY AND FUSE REPLACEMENT.................................. 15

SYMBOLS

Caution ! Risk of electric shock.

Caution! Refer to the explanation in this Manual

Alternating Current (AC)

Direct Current (DC)

The equipment is protected by double insulation

or reinforced insulation

Earth (Ground)

Audible tone

Battery

Complies with European Directives

Conforms to relevant Australian standards

Canadian Standards Association (NRTL/C)

Do not dispose of this product as unsorted

municipal waste. Contact a qualified recycler.



SAFETY INFORMATION

The Meter complies with:

IEC/EN 61010-1 3rd Edition, UL61010-1 2nd Ed. and CAN/

CSA-C22.2 No. 61010-1-04 + CSA Update No.1: 2008 to

Category III 600 Volts, Pollution degree 2

IEC/EN 61010-2-030

IEC/EN 61010-2-31 for test leads

EMC IEC/EN 61326-1

“This product has been tested to the requirements of

CAN/CSA-C22.2 No. 61010-1, second edition, including

Amendment 1, or a later version of the same standard

incorporating the same level of testing requirements”.

Measurement Category III (CAT III) is for measurements

performed in the building installation. Examples are

measurements on distribution boards, circuit- breakers,

wiring, including cables, bus-bars, junction boxes,

switches, socket-outlets in the fixed installation, and

equipment for industrial use and some other equipment,

for example, stationary motors with permanent

connection to the fixed installation.

CENELEC Directives

The instruments conform to CENELEC Low-voltage

directive 2006/95/EC and Electromagnetic compatibility

directive 2004/108/EC



Warning: Read Before Using

• To avoid possible electrical shock or personal injury,

follow these instructions and use the Meter only as

specified in this manual.

• Do not use the Meter or test leads if they appear

damaged, or if the Meter is not operating properly.

If in doubt, have the Meter serviced.

• Always use the proper function and range for

measurements.

• Before rotating the function range selection switch,

disconnect test probe from circuit under test.

• Verify the Meter’s operation by measuring on a

known voltage source.

• Do not apply more than the rated voltage, as

marked on the Meter, between the test probe or

between any test probe and earth ground.

• Use the Meter with caution for voltages above 30

Vac rms, 42 Vac peak, or 60 Vdc. These voltages pose

electrical shock hazards.

• Disconnect circuit power and discharge all high-

voltage capacitors before testing resistance.

• Do not use the Meter around explosive gas or vapor.

• When using the test leads, keep your fingers behind

the finger guards.

• Remove test leads from the Meter before opening

the Meter case or battery door.

• if the meter is used in a manner not specified in

the users manual, the protection provided by the

equipment may be impaired

Andere Handbücher für AM-500

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Amprobe Multimeter Handbücher

Amprobe

Amprobe AU92 Bedienungsanleitung

Amprobe

Amprobe AD105A Bedienungsanleitung

Amprobe

Amprobe ACDC-400 Bedienungsanleitung

Amprobe

Amprobe 37XR-A Bedienungsanleitung

Amprobe

Amprobe AM-510-EUR Bedienungsanleitung

Amprobe

Amprobe HD160C Bedienungsanleitung

Amprobe

Amprobe 30XR-A Bedienungsanleitung

Amprobe

Amprobe 37XR-A Bedienungsanleitung

Amprobe

Amprobe AM-250 Bedienungsanleitung

Amprobe

Amprobe 34XR-A Bedienungsanleitung

Amprobe

Amprobe ac68C Bedienungsanleitung

Amprobe

Amprobe AM-420 Bedienungsanleitung

Amprobe

Amprobe ACDC-600A Bedienungsanleitung

Amprobe

Amprobe AM-140-A Bedienungsanleitung

Amprobe

Amprobe 5XP-A Bedienungsanleitung

Amprobe

Amprobe AM-220 Bedienungsanleitung

Amprobe

Amprobe 33XR-A Bedienungsanleitung

Amprobe

Amprobe KWC-2000 Bedienungsanleitung

Amprobe

Amprobe PMM-2 Bedienungsanleitung

Amprobe

Amprobe AM-560 Bedienungsanleitung

Amprobe

Amprobe AM-100 Bedienungsanleitung

Amprobe

Amprobe AM-560 Bedienungsanleitung

Amprobe

Amprobe PM51A Bedienungsanleitung

Amprobe

Amprobe ACD-10 TRMS-PLUS Bedienungsanleitung

Beliebte Multimeter Handbücher anderer Marken

Agilent Technologies

Agilent Technologies 34420A Bedienungsanleitung

Fluke

Fluke 83 Bedienungsanleitung

Hameg

Hameg HM 8012 Bedienungsanleitung

Mastech

Mastech MY70 Bedienungsanleitung

Steren

Steren MUL-300 Bedienungsanleitung

Somogyi Elektronic

Somogyi Elektronic home SMA 92 Bedienungsanleitung

Gossen MetraWatt

Gossen MetraWatt METRAmax 6 Bedienungsanleitung

PeakTech

PeakTech 4000 Gebrauchs- und Pflegehandbuch

YOKOGAWA

YOKOGAWA 90050B Bedienungsanleitung

Gossen MetraWatt

Gossen MetraWatt METRALINE DMM16 Bedienungsanleitung

Fluke

Fluke 8846A Bedienungs- und Wartungshandbuch

Tempo Communications

Tempo Communications MM200 Bedienungsanleitung

Elenco Electronics

Elenco Electronics CM-1555 Bedienungsanleitung

Mastech

Mastech MS8238C Bedienungsanleitung

SDAR

SDAR 830A, 830B, 830D, 830C Bedienungsanleitung

RS PRO

RS PRO RS-9519BT Bedienungsanleitung

BGS technic

BGS technic 8890 Bedienungsanleitung

Morris

Morris 57074 Bedienungsanleitung