Amprobe AM-500 Bedienungsanleitung

AM-500

Autoranging

Multimeter

EN FR ES

User Manual

www. .com information@itm.com1.800.561.8187

AM-500

Autoranging Multimeter

User Manual

10/2017, 4275548 A

English

www. .com information@itm.com1.800.561.8187

Limited Warranty and Limitation of Liability

Your Amprobe product will be free from defects in material and

workmanship for one year from the date of purchase unless

local laws require otherwise. This warranty does not cover fuses,

disposable batteries or damage from accident, neglect, misuse,

alteration, contamination, or abnormal conditions of operation

or handling. Resellers are not authorized to extend any other

warranty on the behalf of Amprobe. To obtain service during the

warranty period, return the product with proof of purchase to an

authorized Amprobe Service Center or to an Amprobe dealer or

distributor. See Repair Section for details. THIS WARRANTY IS YOUR

ONLY REMEDY. ALL OTHER WARRANTIES - WHETHER EXPRESS,

IMPLIED OR STATUTORY - INCLUDING IMPLIED WARRANTIES OF

FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY, ARE

HEREBY DISCLAIMED. MANUFACTURER SHALL NOT BE LIABLE

FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL

DAMAGES OR LOSSES, ARISING FROM ANY CAUSE OR THEORY.

Since some states or countries do not allow the exclusion or

limitation of an implied warranty or of incidental or consequential

damages, this limitation of liability may not apply to you.

Repair

All Amprobe returned for warranty or non-warranty repair or

for calibration should be accompanied by the following: your

name, company’s name, address, telephone number, and proof of

purchase. Additionally, please include a brief description of the

problem or the service requested and include the test leads with

the meter. Non-warranty repair or replacement charges should be

remitted in the form of a check, a money order, credit card with

expiration date, or a purchase order made payable to Amprobe.

In-Warranty Repairs and Replacement – All Countries

Please read the warranty statement and check your battery before

requesting repair. During the warranty period, any defective

test tool can be returned to your Amprobe distributor for an

exchange for the same or like product. Please check the “Where

Additionally, in the United States and Canada, in-warranty repair

and replacement units can also be sent to an Amprobe Service

Center (see address below).

Non-warranty Repairs and Replacement – United States and Canada

Non-warranty repairs in the United States and Canada should be

sent to an Amprobe Service Center. Call Amprobe or inquire at your

point of purchase for current repair and replacement rates.

www. .com information@itm.com1.800.561.8187

Non-Warranty Repairs and Replacement – Europe

European non-warranty units can be replaced by your Beha-Amprobe

distributor for a nominal charge. Please check the “Where to Buy”

Beha-Amprobe

Division and reg. trademark of Fluke Corp. (USA)

*(Correspondence only – no repair or replacement available from this address.

European customers please contact your distributor.)

**single contact address in EEA Fluke Europe BV

www. .com information@itm.com1.800.561.8187

AM-500 Autoranging Mulitmeter

1LCD Display

2SELECT Button

3DATA HOLD Button

4Rotary Switch

5Input Terminal for voltage, diode, resistance and

continuity measurement

6Input Terminal for battery test and AC/DC mA or μA

measurement

7Input Terminal for AC/DC A measurement to10A

8COM (return) terminal for all measurements

www. .com information@itm.com1.800.561.8187

1The Meter selects the range with best resolution

2Direct Current

3Alternate Current

4Negative reading

5Data hold

6Diode test

7Continuity test

8Measurement units for resistance test

9Measurement units for voltage test

10 Measurement units for current test

11 Low battery indicator

12 Battery Test

Screen Display

16 7

www. .com information@itm.com1.800.561.8187

CONTENTS

SYMBOLS............................................................................ 2

SAFETY INFORMATION ...................................................... 2

UNPACKING AND INSPECTION .......................................... 4

FEATURES............................................................................ 4

MAKING MEASUREMENT .................................................. 5

Rotary Switch Positions.................................................. 5

SELECT Button ................................................................ 6

DATA HOLD Button........................................................ 6

Auto Power OFF ............................................................. 6

Measuring AC and DC Voltage...................................... 6

Measuring Resistance .................................................... 7

Measuring Continuity .................................................... 7

Measuring Diode............................................................ 8

Battery Test..................................................................... 8

Measuring AC and DC Current...................................... 9

SPECIFICATION.................................................................... 10

MAINTENANCE AND REPAIR ............................................. 14

BATTERY AND FUSE REPLACEMENT.................................. 15

www. .com information@itm.com1.800.561.8187

SYMBOLS

Caution ! Risk of electric shock.

Caution! Refer to the explanation in this Manual

Alternating Current (AC)

Direct Current (DC)

The equipment is protected by double insulation

or reinforced insulation

Earth (Ground)

Audible tone

Battery

Complies with European Directives

Conforms to relevant Australian standards

Canadian Standards Association (NRTL/C)

Do not dispose of this product as unsorted

municipal waste. Contact a qualified recycler.



SAFETY INFORMATION

The Meter complies with:

IEC/EN 61010-1 3rd Edition, UL61010-1 2nd Ed. and CAN/

CSA-C22.2 No. 61010-1-04 + CSA Update No.1: 2008 to

Category III 600 Volts, Pollution degree 2

IEC/EN 61010-2-030

IEC/EN 61010-2-31 for test leads

EMC IEC/EN 61326-1

“This product has been tested to the requirements of

CAN/CSA-C22.2 No. 61010-1, second edition, including

Amendment 1, or a later version of the same standard

incorporating the same level of testing requirements”.

Measurement Category III (CAT III) is for measurements

performed in the building installation. Examples are

measurements on distribution boards, circuit- breakers,

wiring, including cables, bus-bars, junction boxes,

www. .com information@itm.com1.800.561.8187

switches, socket-outlets in the fixed installation, and

equipment for industrial use and some other equipment,

for example, stationary motors with permanent

connection to the fixed installation.

CENELEC Directives

The instruments conform to CENELEC Low-voltage

directive 2006/95/EC and Electromagnetic compatibility

directive 2004/108/EC

Warning: Read Before Using

• To avoid possible electrical shock or personal injury,

follow these instructions and use the Meter only as

specified in this manual.

• Do not use the Meter or test leads if they appear

damaged, or if the Meter is not operating properly.

If in doubt, have the Meter serviced.

• Always use the proper function and range for

measurements.

• Before rotating the function range selection switch,

disconnect test probe from circuit under test.

• Verify the Meter’s operation by measuring on a

known voltage source.

• Do not apply more than the rated voltage, as

marked on the Meter, between the test probe or

between any test probe and earth ground.

• Use the Meter with caution for voltages above 30

Vac rms, 42 Vac peak, or 60 Vdc. These voltages pose

electrical shock hazards.

• Disconnect circuit power and discharge all high-

voltage capacitors before testing resistance.

• Do not use the Meter around explosive gas or vapor.

• When using the test leads, keep your fingers behind

the finger guards.

• Remove test leads from the Meter before opening

the Meter case or battery door.

• if the meter is used in a manner not specified in

the users manual, the protection provided by the

equipment may be impaired

www. .com information@itm.com1.800.561.8187

UNPACKING AND INSPECTION

Your shipping carton should include:

1 AM-500 Multimeter

1 Pair of test leads

2 1.5V alkaline AAA battery (installed)

1 Users manual

If any of the items are damaged or missing, return

the complete package to the place of purchase for an

exchange.

FEATURES

Easy to use digital multimeter designed for the

homeowner or DIY enthusiast. Install, troubleshoot or

repair light fixtures, fans, appliances, or automotive

electrical problems with easy and safety of a CAT III 600V

rated product. Check for voltage in electrical sockets,

extension cords, batteries and other electrical circuits. Let

the power of a professional Amprobe multimeter keep

you safe and help you solve all your electrical challenges.

• Measurements: Voltage up to 600V AC/DC, AC/DC

Current and Resistance

• Audible continuity

• Diode Test

• Data hold

• Auto power off

• Low battery warning

• Safety: CAT III 600V

www. .com information@itm.com1.800.561.8187

Andere Handbücher für AM-500

Inhaltsverzeichnis

Sprachen:

Andere Amprobe Multimeter Handbücher

Amprobe

Amprobe 5XP-A Bedienungsanleitung

Amprobe

Amprobe ACD-14 PLUS Bedienungsanleitung

Amprobe

Amprobe 15XP-A Bedienungsanleitung

Amprobe

Amprobe 37XR-A Bedienungsanleitung

Amprobe

Amprobe 37XR-A Bedienungsanleitung

Amprobe

Amprobe AM-20 Bedienungsanleitung

Amprobe

Amprobe DM73C Bedienungsanleitung

Amprobe

Amprobe DM78B Bedienungsanleitung

Amprobe

Amprobe 33XR-A Bedienungsanleitung

Amprobe

Amprobe AM-34 Bedienungsanleitung

Amprobe

Amprobe AM-250 Bedienungsanleitung

Amprobe

Amprobe ACD-14 PLUS Bedienungsanleitung

Amprobe

Amprobe KWC-2000 Bedienungsanleitung

Amprobe

Amprobe ACD-10 TRMS-PLUS Bedienungsanleitung

Amprobe

Amprobe AMP-330 Bedienungsanleitung

Amprobe

Amprobe AC75B Bedienungsanleitung

Amprobe

Amprobe PM-60 Bedienungsanleitung

Amprobe

Amprobe 34XR-A Bedienungsanleitung

Amprobe

Amprobe AM-540 Bedienungsanleitung

Amprobe

Amprobe AM535 Bedienungsanleitung

Amprobe

Amprobe 34XR-A Bedienungsanleitung

Amprobe

Amprobe ACD-15 Pro Bedienungsanleitung

Amprobe

Amprobe 5XP-A Bedienungsanleitung

Amprobe

Amprobe AM-1200 Bedienungsanleitung

Beliebte Multimeter Handbücher anderer Marken

Agilent Technologies

Agilent Technologies 34420A Bedienungsanleitung

Fluke

Fluke 83 Bedienungsanleitung

Hameg

Hameg HM 8012 Bedienungsanleitung

Mastech

Mastech MY70 Bedienungsanleitung

Steren

Steren MUL-300 Bedienungsanleitung

Somogyi Elektronic

Somogyi Elektronic home SMA 92 Bedienungsanleitung

Gossen MetraWatt

Gossen MetraWatt METRAmax 6 Bedienungsanleitung

PeakTech

PeakTech 4000 Gebrauchs- und Pflegehandbuch

YOKOGAWA

YOKOGAWA 90050B Bedienungsanleitung

Gossen MetraWatt

Gossen MetraWatt METRALINE DMM16 Bedienungsanleitung

Fluke

Fluke 8846A Bedienungs- und Wartungshandbuch

Tempo Communications

Tempo Communications MM200 Bedienungsanleitung

Elenco Electronics

Elenco Electronics CM-1555 Bedienungsanleitung

Mastech

Mastech MS8238C Bedienungsanleitung

SDAR

SDAR 830A, 830B, 830D, 830C Bedienungsanleitung

RS PRO

RS PRO RS-9519BT Bedienungsanleitung

BGS technic

BGS technic 8890 Bedienungsanleitung

Morris

Morris 57074 Bedienungsanleitung