AMS Alborz MicroSystem Bedienungsanleitung

Alborz

MicroSystem

AMS-RE3011 RIO

Remote IO Module User’s Manual

Alborz Micro System

Industrial Control

& Monitoring

Power Distribution

Panel

Wireless Radio

Modem

Telemetry Control

Data Acquisition &

Transmission

Technical Support and

Contact Information:

alborzmicrosystem.com

AMS-E3011 RIO User’s Manual

AMS-E3011 Hardware User’s Manual

The documentation is copyrighted 2016 by Alborz Micro System Co., Ltd. All rights are reserved.

AMS Co., Ltd.

Trademarks

The Alborz Micro System logo is a registered trademark of AMS Inc.

All other trademarks or registered marks in this manual belong to their respective

manufacturers.

Disclaimer

Information in this document is subject to change without notice and does not represent a

commitment on the part of Alborz Micro System.

AMS provides this document as is, without warranty of any kind, either expressed or implied,

including, but not limited to, its particular purpose. AMS reserves the right to make improvements

and/or changes to this manual, or to the products and/or the programs described in this manual,

at any time.

Information provided in this manual is intended to be accurate and reliable. However, AMS

assumes no responsibility for its use, or for any infringements on the rights of third parties that

may result from its use.

This product might include unintentional technical or typographical errors. Changes are

periodically made to the information herein to correct such errors, and these changes are

incorporated into new editions of the publication.

Technical Support Contact Information

www.alborzmicrosystem.com

AMS-E3011 RIO User’s Manual

Table of Contents

1. Introduction

1.1. Overview

1.2. Package check list

1.3. Product Key Features

1.4. Specification

1.5. Hardware Block Diagram

1.6. Physical Dimensions

1.7. Appearance

1.8. LED Indicators

2. Initial Setup

2.1. Appearance

2.2. DIN-Rail Installation

2.3. Wall-mounted Installation

2.4. Device Address and Baud Rate Setting

2.5. Modbus Register Map

3. Module Specifications and Wiring

3.1. Power Supply

3.2. Analog Input

3.3. Digital Input

3.4. Digital Output

3.5. Serial Ports

AMS-E3011 RIO User’s Manual

1.1. Overview

Alborz MicoSystem provides a variety of solutions in the fields of software and hardware in SCADA

and Telemetric systems. In the hardware category, the RTU productions of the company are divided

into five categories of RTU100, IDL1000, MDL2000, AMS-R3000 and AMS-R4000, which they are

designed and developed for specific applications in the SCADA systems. In this document, we focus

on the features and capabilities of the AMS-E3011 Remote IO and how you can be benefited from

these features in your SCADA project.

1.2. Package check list

The AMS-E3011 ships with the following items:

• AMS-E3011 RIO Controller

• Quick Start

Optional Accessories (They can be purchased separately)

• R30-MSP: Male serial connection (3pin to DB9)

• R30-FSP: Female serial connection (3pin to DB9)

AMS-E3011 RIO User’s Manual

1.3. Product Key Features

Powerful Cortex-M3 industrial-grade CPU

Low power consumption

Support multiple industry standard

Support multiple communication protocols

4x 1KHz Counter

8x Digital Inputs

4x Digital Output

4x Analog Inputs

LED indicator for all of the inputs, outputs and communication status

Chatter Filter

Jitter Filter

Watchdog Timer

1.4. Specification

The AMS-E3011 RIO is a remote IO expansion module with a low power consumption feature

which is offered for using in SCADA systems with limited number of Input/output. It can

connect to any RTU or PLC through RS485, RS232 or CAN bus with the standard Modbus

communication protocol. Moreover, AMS-E3011 RIO can be used as a standalone device to

transmit numerous IO with twisted pair cable up to 3000ft (900m) farther. This product

benefit from a Cortex-M3 industrial-grade CPU, integrated power supply and a number of

accurate analog and digital inputs/outputs in order to data acquisition and perform

supervisory commands.

AMS-E3011 RIO User’s Manual

Technical Specification

Power Supply and Consumption

External Power

+9-36 VDC

*(18-75 VDC available as a request)

Power Consumption

1.5 W max

I/O

Digital Input

8 Ch (+15~30VDC) Isolation 2.5KV RMS

*(8 Ch (+40~55VDC) available as a request)

Digital Output

4 Ch (Relay 1A ~ 125VAC)

Analog Input

4 Ch 12Bit (4-20mA / 0-20mA / 0-5V)

Communication

Internal

RS485, RS232, CAN

Protocols

Modbus Master/Slave

Baud rate

600~921600 bps

(Easy online setup with DIP-Switches)

Slave ID

1-15

(Easy online setup with DIP-Switches)

Computer

CPU

32-bit ARM Cortex-M3

Real Time Clock

Internal RTC

Accuracy 5 sec in year @ 25’C

Physical

Size (WxHxD)

105x91x58.4 mm

4.13x3.58x2.3 inches

Material

ABS UL-94-HB

Mounting

DIN Rail mounting

Wall Mounting Available

Environmental Parameter

Temperature

-40°C ~ 80°C

EPIL Certified

Humidity

0 ~ 95 % non-condensing

Standards

EMC:

IEC61000-4-2

IEC61000-4-4

IEC61000-4-5

IEC61000-4-6

IEC61000-4-8

EPIL & AUT Certified

AMS-E3011 RIO User’s Manual

1.5. Hardware block diagram:

The following figure shows the AMS-E3011 block diagram with all features.

Figure 1, AMS-E3011 Block Diagram

AMS-E3011 RIO User’s Manual

1.6. Physical Dimensions

AMS-E3011 RIO User’s Manual

1.7. Appearance

The following figure depict AMS-R3011 RIO controller in the Isometric View.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere AMS E/A-System Handbücher

AMS

AMS AMS-R4000 RTU Bedienungsanleitung

Beliebte E/A-System Handbücher anderer Marken

WAGO

WAGO 750-344 Bedienungsanleitung

Teknim

Teknim TWM-1887 Bedienungsanleitung

Intelligent Appliance

Intelligent Appliance IA-2662-E Bedienungsanleitung

BERGHOF

BERGHOF ECC DIO 16/16 Bedienungsanleitung

Advantech

Advantech PCM-27J3AU Installations- und Betriebshandbuch

Festo

Festo CP-E08-M12-CL Bedienungsanleitung

Measurement Computing

Measurement Computing PCI-DAS64/M1/16 Bedienungsanleitung

Hitachi

Hitachi HX-RIO3 Series Bedienungsanleitung

NUUO

NUUO SCB-A08 Bedienungsanleitung

M-system

M-system R3Y-RS8 Bedienungsanleitung

jablotron

jablotron JB-110N Bedienungsanleitung

Omron

Omron SYSMAC C200H Bedienungsanleitung

DOLD

DOLD SAFEMASTER M Bedienungsanleitung

ABB

ABB OPT-MF-001 Bedienungsanleitung

Omron

Omron SYSMAC C2000H Bedienungsanleitung

Helmholz

Helmholz TB20 Bedienungsanleitung

ICP DAS USA

ICP DAS USA tM-AD2 Bedienungsanleitung

Automationdirect.com

Automationdirect.com DL305 Bedienungsanleitung