Advantech PCM-27J3AU Installations- und Betriebshandbuch

STARTUP MANUAL

1 Startup Manual

PCM-27J3AU

3-Port Audio Stereo, mPCIe, 3.5mm Jack

Packing List

Before installation, please make sure that you have:

1 x Audio mPCIe Card

1 x 3-Port Audio I/O plate with iDoor bracket

1 x Wired signal cable

1 x Startup Manual

1 x Warranty Card

If anything is missing or damaged, contact your distributor

or sales representative immediately.

Installation

Notes

For more information on this and other Advantech

products, visit our websites at:

http://www.advantech.com

http://www.advantech.com/eAutomation

For technical support and service:

http://www.advantech.com.tw/eservice

This manual is for PCM-27J3AU

Part No: 200327J300 1st Edition

December 2015

PIN Assignment of Audio Signal Connector

(14-Pin)

Documentation/Software Support Guide

PCM Module with iDoor technology supports following

iAutomation Computing Platforms:

Embedded Automation PC UNO-2200/2300 series

Control DIN-Rail PC UNO-1300/1400 series

Control Cabinet PC UNO-3200/3300/3400 series

Control Panel Computers TPC-xx81/xx82 series

Thin Client Panel Computers TPC-xx51 series

See the following page for installation in TPC Embedded

Panel Computers and UNO Embedded Computers.

The Startup Manual is included in the package. The other

support documentation such as datasheets can be accessed

from Advantech's website.

Description of PIN Use - I/O Board CN2 / mPCIe Card CN1

Pin1 LOUT_R Pin2 LOUT_L

Pin3 LOUT_JD Pin4 GND_AUD

Pin5 LIN_R Pin6 LIN_L

Pin7 LIN_JD Pin8 GND_AUD

Pin9 MIC_R Pin10 MIC_L

Pin11 MIC_JD Pin12 GND_AUD

Pin13 GND_AUD Pin14 NC

Startup Manual 2

TPC Embedded Panel Computer Installation

1. Remove the screws from the backplate and lift

it off.

UNO Embedded Computer Installation

1. Remove the screws from the base plate and

lift to remove.

2. Insert the mini-PCIe card and secure the screws

3. Remove the screws to remove the blanking

plate.

2. Remove the blanking plate screws and the

blanking plate.

3. Insert the PCM Module through the

blanking plate slot.

4. Secure the PCM Module with the screws you

removed from the blanking plate.

4. Insert the PCM Module through the blanking

plate hole and secure the screws. Attach the

PCM Module to the mini-PCIe card with the

cable.

Inhaltsverzeichnis

Andere Advantech E/A-System Handbücher

Advantech

Advantech 48/24-Channel Digital Input/Output USB Module... Bedienungsanleitung

Advantech

Advantech WISE-4060 Installations- und Betriebshandbuch

Advantech

Advantech ADAM-3013 Bedienungsanleitung

Advantech

Advantech ADAM-5000/TCP Series Bedienungsanleitung

Advantech

Advantech PCI-1758UDO Installations- und Betriebshandbuch

Advantech

Advantech WISE-2200-M Installations- und Betriebshandbuch

Advantech

Advantech UNO-2000-LKAE Bedienungsanleitung

Advantech

Advantech PCI-1758UDIO Installations- und Betriebshandbuch

Advantech

Advantech PCL-730 Installations- und Betriebshandbuch

Advantech

Advantech AMAX-5000 Series Bedienungsanleitung

Advantech

Advantech ADAM-6000 series Bedienungsanleitung

Advantech

Advantech ADAM-6300 Series Bedienungsanleitung

Advantech

Advantech USB-5820 Bedienungsanleitung

Advantech

Advantech WISE-4000 Series Bedienungsanleitung

Advantech

Advantech USB-582 Installations- und Betriebshandbuch

Advantech

Advantech PCIE-1762H Bedienungsanleitung

Advantech

Advantech AIIS-E730 Installations- und Betriebshandbuch

Advantech

Advantech AMAX-5000 Series Bedienungsanleitung

Advantech

Advantech PCI-1727U Bedienungsanleitung

Advantech

Advantech USB-4716 Bedienungsanleitung

Advantech

Advantech PCL-733 Bedienungsanleitung

Advantech

Advantech WISE-4610 Series Bedienungsanleitung

Advantech

Advantech USB-4751 Bedienungsanleitung

Advantech

Advantech USB-5801 Bedienungsanleitung

Beliebte E/A-System Handbücher anderer Marken

WAGO

WAGO 750-344 Bedienungsanleitung

Teknim

Teknim TWM-1887 Bedienungsanleitung

Intelligent Appliance

Intelligent Appliance IA-2662-E Bedienungsanleitung

BERGHOF

BERGHOF ECC DIO 16/16 Bedienungsanleitung

Festo

Festo CP-E08-M12-CL Bedienungsanleitung

Measurement Computing

Measurement Computing PCI-DAS64/M1/16 Bedienungsanleitung

Hitachi

Hitachi HX-RIO3 Series Bedienungsanleitung

NUUO

NUUO SCB-A08 Bedienungsanleitung

M-system

M-system R3Y-RS8 Bedienungsanleitung

jablotron

jablotron JB-110N Bedienungsanleitung

Omron

Omron SYSMAC C200H Bedienungsanleitung

DOLD

DOLD SAFEMASTER M Bedienungsanleitung

ABB

ABB OPT-MF-001 Bedienungsanleitung

Omron

Omron SYSMAC C2000H Bedienungsanleitung

Helmholz

Helmholz TB20 Bedienungsanleitung

ICP DAS USA

ICP DAS USA tM-AD2 Bedienungsanleitung

Automationdirect.com

Automationdirect.com DL305 Bedienungsanleitung

WAGO

WAGO I/O-SYSTEM 750 Bedienungsanleitung