AMT Datasouth Fastmark M10XPd/Gen-2 Bedienungsanleitung

Fastmark M10XPd/Gen-2

Thermal Barcode Printer

(Direct & Transfer)

User’s Guide

Document #121886

Information in this manual is subject to change without notice and does not

represent a commitment on the part of AMT Datasouth Corporation. No part of

this manual may be reproduced or transmitted in any form by any means, for

any purpose other than the purchaser’s personal use, without the expressed

written permission of AMT Datasouth Corporation.

CG Triumvirate is a trademark of Agfa Corporation. CG Triumvirate Bold

Condensed font is under license from the Monotype Corporation. Windows is a

registered trademark of Microsoft Corporation.

All other trademarks are the property of their respective owners.

- i -

- ii -

Agency Compliance and Approvals

EN 55032, Class AEN

EN 55024

EN 60950-1

EN 62368

This is a class A product. In a domestic environment this product may cause radio

interference in which case the user may be required to take adequate measures.

FCC part 15B, Class A

AICES-003, Class A

This equipment has been tested and found to comply with the limits for a Class A

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference when the equipment is

operated in a commercial environment.

This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the manufacturer’s instruction manual, may

cause harmful interference with radio communications. Operation of this equipment

in a residential area is likely to cause harmful interference, in which case you will be

required to correct the interference at your own expense.

This Class A digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe A est conform à la norme NMB-003 du

Canada.

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) This device may cause harmful interference, and (2)

this device must accept any interference received, including interference that may

cause undesired operation.

AS/NZS CISPR 22, Class A

UL 60950-1 (2nd Edition)

CSA C22.2 No. 60950-1-07 (2nd Edition)

EN 62368-1:2014/A11:2017

UL 62368-1, 2nd Edition, 2014-12-01 (Audio/video, Information and

Communication Technology Equipment - Part 1: Safety Requirements)

CAN/CSA C22.2 No. 62368-1-14, 2nd Edition, 2014-12 (Audio/video, Information

and Communication Technology Equipment - Part 1: Safety Requirements)

- iii -

GB 4943.1

GB 9254, Class A

GB 17625.1

此为 A 级产品，在生活环境中，该产品可能会造成无线电干扰，

在这种情况下，可能需要用户对干扰采取切实可行的措施。

Energy Star for Imaging Equipment Version 3.0

IS 13252(Part 1)/

IEC 60950-1

Note: There may have certification differences in the series models, please refer to product label for

accuracy.

Important safety instructions:

Read all of these instructions and keep them for later use.

Follow all warnings and instructions on theproduct.

Disconnect the power plug from the AC outlet before cleaning or if faults happen.

Do not use liquid or aerosol cleaners. Using a damp cloth is suitable for cleaning.

The mains socket shall be installed near the equipment and easilyaccessible.

The unit must be protected against moisture.

Ensure the stability when installing the device, Tipping or dropping could cause damage.

Make sure to follow the correct power rating and power type indicated on marking label

provided bymanufacture.

Please refer touser manual for maximum operating ambient temperature.

WARNING:

Hazardous moving parts, keep fingers and other body parts away.

CAUTION:

(For equipment with RTC (CR2032) battery or rechargeable battery pack)

Risk of explosion if battery is replaced by an incorrect type.

Dispose of used batteries according to the Instructions as below.

DO NOT throw the battery infire.

DO NOT short circuit the contacts.

- iv -

DO NOT disassemble thebattery.

DO NOT throw the battery in municipalwaste.

The symbol of the crossed out wheeled bin indicates that the battery should not be placed in

municipal waste.

The printhead may be hot and could cause severe burns. Allow the printhead to cool.

CE Statement:

This equipment complies with EU radiation exposure limits set forth for an uncontrolled environment.

This equipment should be installed and operated with minimum distance 20 cm between the radiator &

your body.

All operational modes:

2.4GHz: 802.11b, 802.11g, 802.11n (HT20), 802.11n (HT40)

5GHz: 802.11a,

The frequency, mode and the maximum transmitted power in EU are listed below:

2400 MHz –2483.5 MHz: 19.88 dBm (EIRP)

5150 MHz –5250 MHz: 17.51 dBm (EIRP)

5150-5350MHz for Only indoor use

5470-5725MHz for indoor/outdoor use

Restrictions In AZE

National restrictions information is provided below

Frequency Band

Country

Remark

5150-5350MHz

Azerbaijan

No license needed if used indoor and

power not exceeding 30mW

5470-5725MHz

Hereby, AMT Datasouth Corp. declares that the radio equipment type [Wi-Fi] IEEE 802.11 a/b/g/n is in

compliance with Directive 2014/53/EU

- v -

RF exposure warning (Wi-Fi)

This equipment must be installed and operated in accordance with provided instructions and must not

be co-located or operating in conjunction with any other antenna or transmitter. End-users and

installers must be providing with antenna installation instructions and transmitter operating conditions

for satisfying RF exposure compliance.

SAR Value: 0.736 W/kg

RF exposure warning (For Bluetooth)

The equipment complies with FCC RF exposure limits set forth for an uncontrolled environment.

The equipment must not be co-located or operating in conjunction with any other antenna or

transmitter.

Canada, Industry Canada (IC) Notices

This Class B digital apparatus complies with Canadian ICES-003 and RSS-210.

Operation is subject to the following two conditions: (1) this device may not cause interference, and (2)

this device must accept any interference, including interference that may cause undesired operation of

the device.

Radio Frequency (RF) Exposure Information

The radiated output power of the Wireless Device is below the Industry Canada (IC) radio frequency

exposure limits. The Wireless Device should be used in such a manner such that the potential for

human contact during normal operation is minimized.

This device has been evaluated for and shown compliant with the IC Specific Absorption Rate (“SAR”)

limits when installed in specific host products operated in portable exposure conditions. (For Wi-Fi)

This device has also been evaluated and shown compliant with the IC RF Exposure limits under

portable exposure conditions. (Antennas are less than 20 cm from a person's body). (For

Bluetooth)

Canada, avis de l'Industry Canada (IC)

Cet appareil numérique de classe B est conforme aux normes canadiennes ICES-003 et RSS-210.

Son fonctionnement est soumis aux deux conditions suivantes : (1) cet appareil ne doit pas causer

d'interférence et (2) cet appareil doit accepter toute interférence, notamment les interférences qui

peuvent affecter son fonctionnement.

Informations concernant l'exposition aux fréquences radio (RF)

La puissance de sortie émise par l’appareil sans fil est inférieure à la limite d'exposition aux fréquences

radio de l'Industry Canada (IC). Utilisez l’appareil sans fil de façon à minimiser les contacts humains

lors du fonctionnement normal.

- vi -

Ce périphérique a été évalué et démontré conforme aux limites SAR (Specific Absorption Rate –Taux

d'absorption spécifique) par l'IC lorsqu'il est connecté à des dispositifs hôtes spécifiques opérant dans

des conditions d’utilisation mobile. (Pour le Wi-Fi)

Ce périphérique a également été évalué et démontré conforme aux limites d'exposition radio-

fréquence par l'IC pour des utilisations par des opérateurs mobiles (les antennes sont à moins de 20

cm du corps d'une personne). (Pour le Bluetooth)

NCC 警語:

經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻率、加大功率或變

更原設計之特性及功能。

(

即低功率電波輻射性電機管理辦法第十二條

)

低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停用，並改善至

無干擾時方得繼續使用。

前項合法通信，指依電信法規定作業之無線電通信。低功率射頻電機須忍受合法通信或工業、科學及醫療

用電波輻射性電機設備之干擾。

(

即低功率電波輻射性電機管理辦法第十四條

)

For MFi Bluetooth

Use of the Made for Apple badge means that an accessory has been

designed to connect specificallyto the Apple product(s) identified in the

badge, and has been certified by the developer to meet Apple performance

standards. Apple is not responsible for the operation of this device or its

compliance withsafety and regulatory standards.

For US Model

Made for iPhone®XS Max, iPhone XS, iPhone XR, iPhone X, iPhone 8,

iPhone 8 Plus, iPhone 7,iPhone 7 Plus, iPhone SE, iPhone 6s, iPhone

6s Plus, iPhone 6, iPhone 6 Plus, iPhone 5s,

iPad Pro® 12.9-inch (2nd generation), iPad Pro 10.5-inch, iPad® (6th generation),

iPad (5th generation), iPad Pro 9.7-inch, iPad Pro 12.9-inch

(1st generation), iPad Air® 2,iPad mini™ 4, iPad mini 3, iPad

Air, iPad mini 2, iPod touch® (6th generation)

iPad, iPad Air, iPad Pro, iPhone are trademarks of Apple Inc.,

registered in the U.S. and othercountries.

http://www.amtdatasouth.com/support-1/downloads/

- vii - 
 
Contents 
1.
 Introduction ..................................................................................................................1 
1.1 Product Introduction .............................................................................................. 1 
1.2 Product Features ................................................................................................... 2 
1.3 Printer Specifications ............................................................................................. 4 
1.4 Print Specifications ................................................................................................5 
1.5 Ribbon Specifications..............................................................................................5 
1.6 Media Specifications ...............................................................................................5 
2.
 Operations Overview .................................................................................................... 6 
2.1 Unpacking and Inspection..................................................................................... 6 
2.2 Printer Overview…………………………………………………………………………………..…… 7 
2.3 Operator Control ..................................................................................................13 
3.
 Setup............................................................................................................................16 
3.1 Setting up the printer............................................................................................16 
3.2 Loading the Ribbon............................................................................................... 17 
3.3 Remove Used Ribbon........................................................................................... 20 
3.4 Loading Media.......................................................................................................21 
4.
 Adjustment Knob ....................................................................................................... 30 
4.1 Printhead Pressure and Position Adjustment ..................................................... 30 
4.2 Ribbon Tension Adjustment Module....................................................................31 
4.3 Mechanism Fine Adjustment to Avoid Ribbon Wrinkles.................................... 32 
5.
 PALTM Print and Program Overview.......................................................................... 34 
PALSECURE ON DEMAND™ ................................................................................... 34 
Traditional Printing.................................................................................................... 34 
Legacy Data Stream Interpretation ........................................................................... 34 
Standalone/Downtime Applications.......................................................................... 36 
6.
 Diagnostic Tool............................................................................................................37 
6.1 Start the Diagnostic Tool .......................................................................................37 

- vii - 
 
2 Printer Function.................................................................................................. 38 
3 Setting Ethernet by Diagnostic Tool ................................................................... 39 
0 LCD Menu Function............................................................................................. 43 
1 Enter the Menu .................................................................................................... 43 
2 Menu Overview.................................................................................................... 44 
3 Setting....................................................................................................................45 
4 Sensor ................................................................................................................... 50 
5 Interface ................................................................................................................ 51 
6 Advanced ...............................................................................................................54 
7 File Manager.........................................................................................................55 
8 Diagnostic..............................................................................................................56 
9 Favorites ............................................................................................................... 58 
8Troubleshooting ..........................................................................................................59 
9Maintenance............................................................................................................... 62 
 
 
 
 
 

Introduction

1.1

Product Introduction

Thank you very much for your purchase.

The new high-performance Fastmark M10XPd Series printer was designed to deliver the

cleanest and highest quality barcodes. It features a die-cast print mechanism housed in

a very strong yet lightweight cabinet. This new design results in a more durable printer

that is suited for your most heavy-duty demand cycles.

The Fastmark M10XPd prints at 203 dpi resolution at speeds up to an amazing 14

inches per second, Fastmark M10XPd offers higher 300 dpi resolution at speeds up to

12 inches per second, and the Fastmark M10XPd series features 600 dpi high

resolution which makes it ideal for printing very small 2D barcodes, graphics, fine print

and other ultra-high-resolution images.

The Fastmark M10XPd Series printers are loaded with standard features including a color

touch display with a brand-new GUI design and six menu buttons to provide a great user

experience, support for 600-meter long ribbons, 8” OD media rolls, built-in Ethernet, RS-

232 interface, two USB hosts for keyboard and scanner connections, USB 2.0 and serial

interfaces. Parallel, GPIO ports, and internal Bluetooth module are available as an option.

This document provides an easy reference for operating the Fastmark M10XPd series

printers. To print label formats, please refer to the instructions provided with your labeling

software.

−Applications

Industrial-duty Printing Distribution

Work in process Shipping/Receiving

Compliance labeling Healthcare Labeling and PatientSafety

Order Fulfillment Electronics & Jewelry labeling

- 1 -

Inhaltsverzeichnis

Andere AMT Datasouth Barcode-Lesegerät Handbücher

AMT Datasouth

AMT Datasouth FM6602 Bedienungsanleitung

AMT Datasouth

AMT Datasouth Fastmark M1 Bedienungsanleitung

AMT Datasouth

AMT Datasouth Fastmark 600 Series Bedienungsanleitung

AMT Datasouth

AMT Datasouth Fastmark M6 PLUS Series Bedienungsanleitung

AMT Datasouth

AMT Datasouth 4600 Bedienungsanleitung

AMT Datasouth

AMT Datasouth Fastmark 4600 PLUS Series User's guide Bedienungsanleitung

AMT Datasouth

AMT Datasouth Fastmark M7 Series Bedienungsanleitung

AMT Datasouth

AMT Datasouth Fastmark M9 Plus Bedienungsanleitung

AMT Datasouth

AMT Datasouth Fastmark M5e Bedienungsanleitung

AMT Datasouth

AMT Datasouth Fastmark M4 Series Bedienungsanleitung

Beliebte Barcode-Lesegerät Handbücher anderer Marken

POSMicro

POSMicro Datalogic PowerScan D7100 Bedienungsanleitung

Marson

Marson MT780 Kurzanleitung zur Einrichtung

NCR

NCR RealPOS Bedienungsanleitung

Motorola

Motorola SE3300 Kurzanleitung zur Einrichtung

Element

Element P130BT Bedienungsanleitung

Motorola

Motorola Symbol LS3008 Installations- und Betriebshandbuch

Meec tools

Meec tools OBD-II / VAG Bedienungsanleitung

SICK

SICK CLP 100 Bedienungsanleitung

Royal Tag SA

Royal Tag SA I-Read Bedienungsanleitung

Welch Allyn

Welch Allyn IMAGETEAM 3800 Bedienungsanleitung

Meteor

Meteor 8310 Bedienungsanleitung

Denso

Denso BHT-500B Bedienungsanleitung

Datalogic

Datalogic Heron HD3130 Bedienungsanleitung

Motorola

Motorola MP6000 Montageanleitung

Newland

Newland NLS-HR15-BT Bedienungsanleitung

ARTDEV

ARTDEV AS-1310 Bedienungsanleitung

Aopos

Aopos AS290 Bedienungsanleitung

ENS

ENS 367-5455 Bedienungsanleitung