AMX TXC16 Plus Bedienungsanleitung

instruction manual

Transmitters

TXC+

Transmitter Series

AMX Limited Warranty and Disclaimer

AMX Corporation warrants its products to be free of defects in material and workmanship under normal use for

three (3) years from the date of purchase from AMX Corporation, with the following exceptions:

• Electroluminescent and LCD Control Panels are warranted for three (3) years, except for the display and touch

overlay components that are warranted for a period of one (1) year.

• Disk drive mechanisms, pan/tilt heads, power supplies, MX Series products, and KC Series products are

warranted for a period of one (1) year.

• Unless otherwise specified, OEM and custom products are warranted for a period of one (1) year.

• Software is warranted for a period of ninety (90) days.

• Batteries and incandescent lamps are not covered under the warranty.

This warranty extends only to products purchased directly from AMX Corporation or an Authorized AMX Dealer.

AMX Corporation is not liable for any damages caused by its products or for the failure of its products to perform.

This includes any lost profits, lost savings, incidental damages, or consequential damages. AMX Corporation is not

liable for any claim made by a third party or by an AMX Dealer for a third party.

This limitation of liability applies whether damages are sought, or a claim is made, under this warranty or as a tort

claim (including negligence and strict product liability), a contract claim, or any other claim. This limitation of

liability cannot be waived or amended by any person. This limitation of liability will be effective even if AMX

Corporation or an authorized representative of AMX Corporation has been advised of the possibility of any such

damages. This limitation of liability, however, will not apply to claims for personal injury.

Some states do not allow a limitation of how long an implied warranty last. Some states do not allow the limitation or

exclusion of incidental or consequential damages for consumer products. In such states, the limitation or exclusion of

the Limited Warranty may not apply. This Limited Warranty gives the owner specific legal rights. The owner may

also have other rights that vary from state to state. The owner is advised to consult applicable state laws for full

determination of rights.

EXCEPT AS EXPRESSLY SET FORTH IN THIS WARRANTY, AMX CORPORATION MAKES NO

OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING ANY IMPLIED WARRANTIES OF

MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. AMX CORPORATION

EXPRESSLY DISCLAIMS ALL WARRANTIES NOT STATED IN THIS LIMITED WARRANTY. ANY

IMPLIED WARRANTIES THAT MAY BE IMPOSED BY LAW ARE LIMITED TO THE TERMS OF THIS

LIMITED WARRANTY.

Table of Contents

TXC+ Transmitter Series

Table of Contents

Product Information .................................................................................................1

Specifications .................................................................................................................... 2

Battery Replacement......................................................................................................... 4

TXC4+ and TXC4+L batteries.................................................................................................. 4

TXC16+ batteries ..................................................................................................................... 4

TXC32+ batteries ..................................................................................................................... 4

OLDesign Overlay Engraving Design Software Program.................................................. 4

IR, IR Frequency, RF, and Radio Code Settings ....................................................5

IR, IR Frequency, and RF Settings ................................................................................... 5

Radio Code ....................................................................................................................... 5

Setting radio codes .................................................................................................................. 5

Trigger switch operation (TXC4+ series only) .......................................................................... 7

Radiation hazards .................................................................................................................... 8

Troubleshooting .......................................................................................................9

ii TXC+ Transmitter Series

Table of Contents

Product Information

TXC+ Transmitter Series

Product Information

Through the use of infrared (IR) or radio frequency (RF) transmission mediums, the TXC+ hand-

held wireless transmitters control a wide variety of devices connected to an AMX Axcess Control

System. These transmitters include the TXC4+, TXC4L+, TXC16+, and TXC32+. For these units

IR, signals are transmitted at 38 kHz or 455 kHz and RF signals at 418 MHz.

The TXC4+ is a four-pushbutton transmitter (FIG. 1) and the TXC16+ transmitter is a 16-

pushbutton configuration (FIG. 2).

Each pushbutton performs a specific operation according to the Axcess software program in your

AMX Control System. The red transmission LED, located in the top-center of the TXC16+ and

TXC32+ transmitters, flashes when you press one of the pushbuttons, indicating that an RF or IR

signal is being transmitted.

The TXC32+ (FIG. 3) provides up to 48 programmable pushbuttons. The number of pushbuttons

varies depending on the overall system design.

FIG. 1 TXC4+ series transmitter

FIG. 2 TXC16+ transmitter

Pushbutton 4

Pushbutton 3

Trigger

Pushbutton 1

Pushbutton 2

Pushbutton 9

Pushbutton 1

Transmission

LED (red)

Pushbutton 8 Pushbutton 16

Product Information

2TXC+ Transmitter Series

Specifications

The specifications for the TXC4+ series are listed in the table below.

FIG. 3 TXC32+ transmitter example

TXC4+ Series Specifications

Dimensions (HWD) 5.40" x 1.80" x 1.50" (13.72 cm x 4.57 cm x 3.81 cm)

Weight

TXC4+ 3.10 oz (87.90 g)

TXC4L+ 3.30 oz (93.60 g)

Enclosure Molded black matte plastic (all models)

Engraved overlay Available colors: black (blank), white, brass, gray, and silver

Power 3.0 VDC (two AAA alkaline batteries - supplied for all models)

Pushbuttons Up to 4 pushbuttons and a trigger

Transmission Frequencies:

IR 38 kHz or 455 kHz (optional international frequencies available)

RF 418 MHz standard (optional frequencies available)

DIP switch 10-position sets IR or RF mode, radio code, and IR frequency

TV/VCR.

CHANNE

CABLE

SLIDES

TUNER

MUTE

VOLUME

CONTROL

LIGHT

VHS

DOWN.

CHANNE

SELECT.

BLIND

SYSTEM

REV.

FOCUS

SCREEN

PRESETS

SLIDES

COMPUTER

SATELLITE

SOURCE

VCR

CASS

MIC

DAT

AUX

PROJ

LIFT

Transmission

LED (red)

utton

Pushbutton 9

Pushbutton 1

Pushbutton 17

Pushbutton 25

Pushbutton 32

Pushbutton 16

Pushbutton 48

Pushbutton 8

Pushbutton 24

Pushbutton 40

Product Information

TXC+ Transmitter Series

The TXC16+ specifications are listed in the table below.

The TXC32+ specifications are listed in the following table.

TXC4+ Series Specifications (Cont.)

Options • Custom logos

• Color text and borders on engraved overlay

• Alternate radio frequencies

• Multiple engraved overlay colors available

TXC16+ Specifications

Dimensions (HWD) 5.20" x 2.80" x 0.75" (13.34 cm x 7.11 cm x 1.91 cm)

Weight 4.00 oz (113.4 g) with batteries

Enclosure Molded black matte plastic

Engraved overlay Available colors: black (blank), white, brass, gray, and silver

Power 3.0 VDC (two N-size, 1.5-volt alkaline batteries - supplied)

Pushbuttons Up to 16 black, gray, and/or white

Transmission Frequencies:

IR 38 kHz or 455 kHz (optional international frequencies available)

RF 418 MHz standard (optional frequencies available)

DIP switch 10-position sets IR or RF mode, radio code, and IR frequency

LED Red LED indicator for signal transmission

Options • Custom logos

• Color text and borders on engraved overlay

• Alternate radio frequencies

• Multiple engraved overlay colors available

TXC32+ Specifications

Dimensions (HWD) 5.20" x 6.20" x 0.75" (13.34 cm x 15.88 cm x 1.91 cm)

Weight 9 oz (255 g) with batteries

Enclosure Molded black matte plastic

Engraved overlay Available colors: black (blank), white, brass, gray, and silver

Power 6.0 VDC (four N-size, 1.5-volt alkaline batteries - supplied)

Pushbuttons Up to 48 black, gray, and white

Transmission Frequencies:

IR 38 kHz or 455 kHz (optional international frequencies available)

RF 418 MHz standard (optional frequencies available)

DIP switch 10-position sets IR or RF mode, radio code, and IR frequency

LED Red LED indicator for signal transmission

Options • Custom logos

• Color text and borders on engraved overlay

• Alternate radio frequencies

• Multiple engraved overlay colors available

Product Information

4TXC+ Transmitter Series

Battery Replacement

TXC4+ and TXC4+L batteries

The TXC4+ line of hand-held wireless transmitters have identical battery placement areas. Remove

the access cover on the back of the transmitter and replace the two AAA batteries. Under normal

conditions, battery life will exceed 1 year. Use alkaline batteries for long battery life and optimum

performance.

TXC16+ batteries

Remove the access cover on the back of the TXC16+ transmitter and replace the two 1.5-volt, "N"

size batteries. Under normal conditions, battery life will exceed 2 years. Use alkaline batteries for

long battery life and optimum performance.

TXC32+ batteries

Remove the access cover on the back of the TXC32+ transmitter and replace the four 1.5-volt, "N"

size batteries. Under normal conditions, battery life will exceed 2 years. Use alkaline batteries for

long battery life and optimum performance.

OLDesign Overlay Engraving Design Software Program

The AMX OLDesign software program is a Windows™-based design tool that you use to create

panel overlays, pushbutton names, and pushbutton operation descriptions. The operation

descriptions are used when the Axcess operating software is programmed. OLDesign also contains

an online help system that describes how to produce custom overlay designs and pushbutton

descriptions, and then store them on your computer. FIG. 4 shows the OLDesign main window and

a sample TXC32+overlay design. Refer to the OLDesign Overlay Design Program instruction

manual for command instructions that can be used with the OLDesign online help system.

FIG. 4 OLDesign main window

IR, IR Frequency, RF, and Radio Code Settings

TXC+ Transmitter Series

IR, IR Frequency, RF, and Radio Code

Settings

The TXC+ series transmitters transmit IR or RF signals, according to how you set positions 1, 2,

and 3 on the 10-position DIP switch (FIG. 5) located under the battery cover.

IR, IR Frequency, and RF Settings

FIG. 5 shows the DIP switch settings for IR and RF modes. The transmitter can only be configured

for either IR of RF, not both.

Radio Code

Each pushbutton on your transmitter represents an Axcess channel number. All of the pushbuttons

on a transmitter represent a group of channel numbers. This grouping is known as a radio code.

After the radio code is set on the transmitter, each button you press sends a specific channel number

to the control system. For example, if your TXC+ transmitter is set to radio code 4 and you press

button 1, channel number 64 is sent to the control system.

Setting radio codes

The table below lists the radio codes, DIP switch positions, and ranges for the TXC4+.

The formula to determine the channel number of a TXC4+ series transmitter is:

(Radio code offset) + (Radio code number multiplied by 16).

Radio Code Offset corresponds to the number of buttons available on the transmitter. Each button

containing its own push-channel.

Refer to the TXC4+ Series Radio Code Offsets and Shifts table on page 7 for the TXC4+ series

radio code offsets a shift.

FIG. 5 DIP switch settings for IR and RF modes

1 2 3 4 5 6 7 8 9 10

ON ON ON

1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 6 7 8 9 10

38 kHz IR mode 455 kHz IR mode RF mode

Do not set both DIP switch positions 1 and 2 to the ON position, or the batteries may

prematurely lose power.

IR, IR Frequency, RF, and Radio Code Settings

6TXC+ Transmitter Series

Set the TXC16+ and TXC32+ radio code using DIP switch positions 7 through 10, which are

accessible when the battery cover is removed.

The formula to determine the channel number of the TXC16+ and TXC32+ is:

(Button number - 1) + (Radio code number multiplied by 16).

TXC4+ Radio Codes, DIP Switch Settings, and Channel Code Ranges

DIP Switch Positions Button and Push Channel Numbers

Radio TXC4+

code 6 7 8 9 10 1 1&4 2 3 2&3 4

0.5 ON OFF OFF OFF OFF 8 14 9 10 11 15

1 OFF ON OFF OFF OFF 16 22 17 18 19 23

1.5 ON ON OFF OFF OFF 24 30 25 26 27 31

2 OFF OFF ON OFF OFF 32 38 33 34 35 39

2.5 ON OFF ON OFF OFF 40 46 41 42 43 47

3 OFF ON ON OFF OFF 48 54 49 50 51 55

3.5 ONON ONOFFOFF 56 62 57 58 59 63

4 OFF OFF OFF ON OFF 64 70 65 66 67 71

4.5 ON OFF OFF ON OFF 72 78 73 74 75 79

5 OFF ON OFF ON OFF 80 86 81 82 83 87

5.5 ON ON OFF ON OFF 88 94 89 90 91 95

6 OFF OFF ON ON OFF 96 102 97 98 99 103

6.5 ON OFF ON ON OFF 104 110 105 106 107 111

7 OFF ON ON ON OFF 112 118 113 114 115 119

7.5 ON ON ON ON OFF 120 126 121 122 123 127

8 OFF OFF OFF OFF ON 128 134 129 130 131 135

8.5 ON OFF OFF OFF ON 136 142 137 138 139 143

9 OFF ON OFF OFF ON 144 150 145 146 147 151

9.5 ON ON OFF OFF ON 152 158 153 154 155 159

10 OFF OFF ON OFF ON 160 166 161 162 163 167

10.5 ON OFF ON OFF ON 168 174 169 170 171 175

11 OFF ON ON OFF ON 176 182 177 178 179 183

11.5 ON ON ON OFF ON 184 190 185 186 187 191

12 OFF OFF OFF ON ON 192 198 193 194 195 199

12.5 ON OFF OFF ON ON 200 206 201 202 203 207

13 OFF ON OFF ON ON 208 214 209 210 211 215

13.5 ON ON OFF ON ON 216 222 217 218 219 223

14 OFF OFF ON ON ON 224 230 225 226 227 231

14.5 ON OFF ON ON ON 232 238 233 234 235 239

15 OFF ON ON ON ON 240 246 241 242 243 247

15.5 ON ON ON ON ON 248 254 249 250 251 255

Andere Handbücher für TXC16 Plus

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere AMX Sender Handbücher

AMX

AMX DUX-MTX-WP Bedienungsanleitung

AMX

AMX TXC-MS Leitfaden

AMX

AMX TX-SK Plus Leitfaden

AMX

AMX TXC4L+ Leitfaden

AMX

AMX DXLink Multi-Format SMF-D Bedienungsanleitung

AMX

AMX DXLink Bedienungsanleitung

AMX

AMX TX32 Kurzanleitung

AMX

AMX TX64 Kurzanleitung

AMX

AMX TXC4 Series Bedienungsanleitung

AMX

AMX DTV-TX03-US Bedienungsanleitung

AMX

AMX DXLink Bedienungsanleitung

AMX

AMX UPX-HDMI+A HDMI Bedienungs- und Wartungsanleitung

AMX

AMX TXC16 Kurzanleitung

AMX

AMX DUX-MTX Bedienungsanleitung

AMX

AMX TX-MLCD Leitfaden

AMX

AMX SoftKey TX-SK+ Bedienungsanleitung

AMX

AMX Network Device TX-CTB Bedienungsanleitung

AMX

AMX DTV-TX01-DVB-T Bedienungsanleitung

AMX

AMX KC/2R Bedienungsanleitung

AMX

AMX AVB-TX-DGX-HD15-SC Fiber Bedienungsanleitung

AMX

AMX DXLITE DXL-TX-4K60 Bedienungsanleitung

AMX

AMX TXC32 Kurzanleitung

AMX

AMX Advanced Classroom Transmitter TXC-ACT Bedienungsanleitung

AMX

AMX Mini-LCD Transmitter TX-MLCD Bedienungsanleitung

Beliebte Sender Handbücher anderer Marken

NIVELCO

NIVELCO EasyTREK SCA-300 Series Betriebsanleitung

Honeywell

Honeywell 5816WMBR Bedienungsanleitung

Kamstrup

Kamstrup READy MTU Betriebsanleitung

Omega

Omega ZW Series Bedienungsanleitung

ABB

ABB Field 264H Leitfaden

Alinco

Alinco DJ-V17T Bedienungsanleitung

Dejero

Dejero EnGo 3x Bedienungsanleitung

Rosemount

Rosemount 4600 Bedienungsanleitung

Speaka Professional

Speaka Professional 2342740 Bedienungsanleitung

trubomat

trubomat GAB 1000 Bedienungsanleitung

Teledyne Analytical Instruments

Teledyne Analytical Instruments LXT-380 Bedienungsanleitung

Rondish

Rondish UT-11 Bedienungsanleitung

MG 10JRE Bedienungsanleitung

Burkert

Burkert 8177 Bedienungsanleitung

Firetide

Firetide HotPort 3203 Handbuch

Tele Radio

Tele Radio T9-02 Bedienungsanleitung

Rotronic

Rotronic HygroFlex HF3 Series Bedienungsanleitung

Jamara

Jamara FCX6 Pro Tel Bedienungsanleitung