Andover Controls Corporation vii
Figures
1. Dimensions and Location of Mounting Holes in Cabinet
Provided, in inches (mm)..................................................................11
2. Dimensions and Location of Mounting Holes in Backplate, in
inches (mm).......................................................................................12
3. Dimensions of ACX 700 on Backplate with EMX 190s,
in inches (mm)...................................................................................13
4. Cover Plate of the ACX 700..............................................................14
5. Metal Plate and Screw for Power Supply Wire ................................16
6. Location of Power Indicating LED on Front Door of Cabinet
Provided ............................................................................................19
7. Power Indicating LED and Its Parts..................................................20
8. Inserting the External LED through Drilled Hole.............................20
9. Infinet Cable Wiring..........................................................................21
10. Attaching the Infinet Cable to Infinity CX 9000 or 9200..................22
11. Normally Closed Supervisory Inputs................................................26
12. Normally Open Supervisory Inputs ..................................................27
13. Wiring Ordinary Switch to DoorSwitch Input .................................28
14. Wiring Switch with Built-in Resistor to DoorSwitch Input .............29
15. Functioning of DoorSwitch Input Wired to Supervisory Input ........30
16. Functioning of Passive Infrared (PIR) Motion Detector Switch
Wired to Supervisory Input...............................................................31
17. Wiring Diagram for Counter or Digital Input...................................32
18. Connections Between Card Reader and Controller ..........................33
19. Wiring Wiegand Card Reader (Sensor Engineering) to Controller........34
20. Connections Between Card Reader and Controller ..........................35
21. Wiring Proximity Wiegand Card Reader to Controller, with
12 VDC Power Supply......................................................................36
22. Connections Between Card Reader and Controller ..........................37
23. Wiring Dorado ABA Card Reader to Controller..............................38
www.PDF-Zoo.com
