Anritsu MP1590B-30 Bedienungsanleitung

MP1590B-30

High Precision

Jitter Analysis

Operation Manual

Fourth Edition

•For safety and warning information, please read this

manual before attempting to use the equipment.

•Additional safety and warning information is pro

vided within the MP1590B Network Performance

Tester Operation Manual. Please also refer to this

document before using the equipment.

•Keep this manual with the equipment.

ANRITSU CORPORATION

Document No.: M-W2352AE-4.0

Safety Symbols

To prevent the risk of personal injury or loss related to equipment malfunction, Anritsu Corporation uses the follow-

ing safety symbols to indicate safety-related information. Insure that you clearly understand the meanings of the

symbols BEFORE using the equipment. Some or all of the following five symbols may not be used on all Anritsu

equipment. In addition, there may be other labels attached to products which are not shown in the diagrams in

this manual.

Symbols used in manual

DANGER This indicates a very dangerous procedure that could result in serious injury or

death if not performed properly.

WARNING This indicates a hazardous procedure that could result in serious injury or death if

not performed properly.

CAUTION This indicates a hazardous procedure or danger that could result in light-to-severe

injury, or loss related to equipment malfunction, if proper precautions are not taken.

Safety Symbols Used on Equipment and in Manual

The following safety symbols are used inside or on the equipment near operation locations to provide information

about safety items and operation precautions. Insure that you clearly understand the meanings of the symbols

and take the necessary precautions BEFORE using the equipment.

This indicates a prohibited operation. The prohibited operation is indicated sym-

bolically in or near the barred circle.

This indicates an obligatory safety precaution. The obligatory operation is indi-

cated symbolically in or near the circle.

This indicates warning or caution. The contents are indicated symbolically in or

near the triangle.

This indicates a note. The contents are described in the box.

These indicate that the marked part should be recycled.

MP1590B-30

High Precision JitterAnalysis

Operation Manual

2 March 2004 (First Edition)

10 June 2009 (Fourth Edition)

publisher.

The contents of this manual may be changed without prior notice.

Printed in Japan

iii

Equipment Certificate

Anritsu Corporation certifies that this equipment was tested before

shipment using calibrated measuring instruments with direct traceabil-

ity to public testing organizations recognized by national research labo-

ratories including the National Institute of Advanced Industrial Science

and Technology, and the National Institute of Information and Commu-

nications Technology, and was found to meet the published specifica-

tions.

Anritsu Warranty

Anritsu Corporation will repair this equipment free-of-charge if a mal-

function occurs within 1 year after shipment due to a manufacturing

fault, provided that this warranty is rendered void under any or all of the

following conditions.

•The fault is outside the scope of the warranty conditions described in

the operation manual.

•The fault is due to mishandling, misuse, or unauthorized modification

or repair of the equipment by the customer.

•The fault is due to severe usage clearly exceeding normal usage.

•The fault is due to improper or insufficient maintenance by the cus-

tomer.

•The fault is due to natural disaster including fire, flooding, earth-

quake, etc.

•The fault is due to use of non-specified peripheral equipment, periph-

eral parts, consumables, etc.

•The fault is due to use of a non-specified power supply or in a

non-specified installation location.

In addition, this warranty is valid only for the original equipment pur-

chaser. It is not transferable if the equipment is resold.

Anritsu Corporation shall assume no liability for injury or financial loss of

the customer due to the use of or a failure to be able to use this equipment.

Anritsu Corporation Contact

In the event that this equipment malfunctions, contact an Anritsu Ser-

vice and Sales office. Contact information can be found on the last page

of the printed version of this manual, and is available in a separate file

on the CD version.

Notes On Export Management

This product and its manuals may require an Export License/Approval by

the Government of the product's country of origin for re-export from you

country.

Before re-exporting the product or manuals, please contact us to confirm

whether they are export-controlled items or not.

When you dispose of export-controlled items, the products/manuals are

needed to be broken/shredded so as not to be unlawfully used for military

purpose.

CE Conformity marking

Anritsu affixes the CE Conformity marking on the following product (s)

in accordance with the Council Directive 93/68/EEC to indicate that they

conform to the EMC and LVD directive of the European Union (EU).

CE marking

1. Product Model

Option: MP1590B-30 High Precision Jitter Analysis

2. Applied Directive and Standards

When the MP1590B-30 High Precision Jitter Analysis are installed in

the MP1590B, the applied directive and standards of these options are

conformed to those of the MP1590B main frame.

PS: About main frame

The kind of main frame (a measuring apparatus) will be to increase.

Please, contact us about the newest information of the main frame.

C-tick Conformity marking

Anritsu affixes the C-tick marking on the following product (s) in accor-

dance with the regulation to indicate that they conform to the EMC

framework of Australia/New Zealand.

C-tick marking

1. Product Model

Option: MP1590B-30 High Precision Jitter Analysis

2. Applied Directive and Standards

When the MP1590B-30 High Precision Jitter Analysis are installed in

the MP1590B, the applied directive and standards of these options are

conformed to those of the MP1590B main frame.

PS: About main frame

The kind of main frame (a measuring apparatus) will be to increase.

Please, contact us about the newest information of the main frame.

About This Manual

The MP1590B Network Performance Tester operation manual contains

those of the main unit, control software, remote control and options as

shown below.

MP1590B

Operation Manual

configuration

MX159001B Network Performance Tester

Control Software Operation Manual SDH Edition

Explains operations for the MP1590B control

software (SDH Edition).

Explains specification for EoS module.

Explains MP1590B basic operations

Explains specification for SDH/SONET module.

Explains specification for MU150121B/23B.

MU150121A 10/10.7G Optical Unit (Tx)

MU150122A 10/10.7G Optical Unit (Rx Narrow)

MU150123A 10/10.7G Optical Unit (Rx Wide)

MU150134A 10/10.7G Optical Unit (Tx Ex. Mod)

Operation Manual

Explains specification for EO/OE module.

Shows this document.

Explains specification for Jitter module.

MU150121B 10/10.7G Optical/Electrical Unit (Tx )

MU150123B 10/10.7G Optical/Electrical Unit (Rx

Wide)

Operation Manual

MU150100A 10/10.7G Unit

Operation Manual

MU150125A 10/10.7G Jitter Unit Operation Manual

MU150101A 2.5/2.6G EoS Unit

Operation Manual

MP1590B Network Performance Tester

Operation Manual

MX159001B Network Performance Tester

Control Software Operation Manual SONET Edition

Explains operations for the MP1590B control

software (SONET Edition).

Explains specification for MU150124B.

MU150124B 10.3G Optical/Electrical Unit (Rx

Wide)

Operation Manual

Explains the remote control via RS-232C, GPIB

and Ethernet Interfaces.

MP1590B Network Performance Tester

Remote Control

Operation Manual

Explains specification for MP1590B-30.

MP1590B-30 High Precision Jitter Analysis

Operation Manual

Explains operation for the software that monitors

traffics on Ethernet.

pplication Traffic Monitor

Operation Manual

Ethernet Module

Operation Manual

Explains basic operations for each Ethernet

module.

III

This Operation Manual supports MP1590B-30 High Precision Jitter

Analysis (for MP1590B).

It is explained in the text in the case of MP1590B-30 High Precision Jit-

ter Analysis.

IV.

Table of Contents

About This Manual........................................ I

Chapter 1 Overview.................................... 1-1

1.1 Overview....................................................................... 1-2

1.2 O.172 New Recommendation and Verification

Method for Jitter Measurement Accuracy..................... 1-2

1.3 Product Configuration................................................... 1-3

Chapter 2 Specifications ........................... 2-1

2.1 Specifications................................................................ 2-2

Inhaltsverzeichnis

Andere Anritsu Prüfgeräte Handbücher

Anritsu

Anritsu MT1000A Network Master Pro Bedienungsanleitung

Anritsu

Anritsu Site Master S113B Bedienungsanleitung

Anritsu

Anritsu ML8720B Bedienungsanleitung

Anritsu

Anritsu Site Master S112 Bedienungsanleitung

Anritsu

Anritsu MU150101A Bedienungsanleitung

Anritsu

Anritsu MP1590B Bedienungsanleitung

Anritsu

Anritsu VectorStar MN469 C Series Bedienungsanleitung

Anritsu

Anritsu 3656B W1 Bedienungsanleitung

Anritsu

Anritsu MT1000A Network Master Pro Bedienungsanleitung

Anritsu

Anritsu MS8608A Bedienungsanleitung

Anritsu

Anritsu 3659 Bedienungsanleitung

Anritsu

Anritsu Site Master S330A Bedienungsanleitung

Anritsu

Anritsu MS8911A Bedienungsanleitung

Anritsu

Anritsu CMA50 Bedienungsanleitung

Anritsu

Anritsu MT1000A Network Master Pro Bedienungsanleitung

Anritsu

Anritsu MD8470A Bedienungsanleitung

Anritsu

Anritsu MP1590B Bedienungsanleitung

Anritsu

Anritsu BERTWave MP2100B Bedienungsanleitung

Anritsu

Anritsu MT1000A Network Master Pro Bedienungsanleitung

Anritsu

Anritsu MT9810B Bedienungsanleitung

Anritsu

Anritsu MT9810A Bedienungsanleitung

Anritsu

Anritsu MT8852B Betriebsanleitung

Anritsu

Anritsu MS9720A Bedienungsanleitung

Anritsu

Anritsu MP8931A Bedienungsanleitung

Beliebte Prüfgeräte Handbücher anderer Marken

SMART

SMART KANAAD SBT XTREME 3G Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies BERT Serial Bedienungsanleitung

Agilent Technologies

Agilent Technologies N3280A Bedienungsanleitung

Vernier

Vernier Go Direct Voltage Bedienungsanleitung

Lifeloc

Lifeloc R.A.D.A.R. Bedienungsanleitung

Fluke

Fluke T5-600 Bedienungs- und Montageanleitung

Mercury

Mercury TSL01 Bedienungsanleitung

MAHA

MAHA MBT Series Bedienungsanleitung

Fuji Electric

Fuji Electric P-61 Bedienungsanleitung

ETC

ETC SealerAtor Bedienungsanleitung

Skyfine

Skyfine ETHYWAY V2 Bedienungsanleitung

Appion

Appion G5 Twin Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 8159-0112A Bedienungsanleitung

BW Technologies

BW Technologies MicroDock II Bedienungsanleitung

Sun Nuclear

Sun Nuclear 1027 Bedienungsanleitung

Biomark

Biomark HPR LITE READER Bedienungsanleitung

Hioki

Hioki 3169-20 Bedienungsanleitung

Ashcroft

Ashcroft ATE-100 Bedienungsanleitung