Ansel Welder Bedienungsanleitung
Wireless Outdoor
Client Bridge / Access Point
2012
User Manual
Version : 1.0
1 Product Overview
Thank you for using ANSEL 2012. It is a powerful, enhanced, enterprise scale
product with 4+1 multi-functions Access Point, Access Point with WDS function,
Client Bridge, WDS Bridge,and Client Router.
ANSEL 2012 is easily to install almost anywhere with Power over Ethernet for quick
outdoor installation. External N-type antenna provides better wireless signal quality
and the antenna is upgradeable. ANSEL 2012 uses 5G band and 2.4G wireless
signal to avoid interference of most digital signal such as mobile phone.
ANSEL 2012 can manage power level control, Narrow bandwidth selection, Traffic
shaping and Real-time RSSI indicator. ANSEL 2012 is fully support of security
encryption including WI-Fi Protected Access (WPA-PSK/WPA2-PSK),
64/128/152-bit WEP Encryption and IEEE 802.1x with RADIUS Accounting.
Auction: The internal antenna is only available for 5G band wireless network.
1.1 Feature
The following list describes the design of the ANSEL 2012 made possible through
the power and flexibility of wireless LANs:
a) Difficult-to-wire environments
There are many situations where wires cannot be laid easily. Historic
buildings, older buildings, open areas and across busy streets make the
installation of LANs either impossible or very expensive.
b) Temporary workgroups
Consider situations in parks, athletic arenas, exhibition centers,
disaster-recovery, temporary offices and construction sites where one
wants a temporary WLAN established and removed.
c) The ability to access real-time information
Doctors/nurses, point-of-sale employees, and warehouse workers can
access real-time information while dealing with patients, serving
customers and processing information.
d) Frequently changed environments
Show rooms, meeting rooms, retail stores, and manufacturing sites where
frequently rearrange the workplace.
e) Wireless extensions to Ethernet networks Network managers in dynamic
environments can minimize the overhead caused by moves, extensions to
networks, and other changes with wireless LANs.
f) Wired LAN backup Network managers implement wireless LANs to provide
backup for mission-critical applications running on wired networks.
g) Training/Educational facilities Training sites at corporations and students at
universities use wireless connectivity to ease access to information,
information exchanges, and learning.
Advantage
High Output Power
up to 26 dBm
Extended excellent Range and Coverage
IEEE 802.11a/b/g
Compliant
Fully Interoperable with IEEE 802.11a/b/g compliant
devices
Detachable antenna
support (N-Type)
Collocate with any antenna for user‟s environment
4+1 Multi-Function
Users can use different mode in various environment
Point-to-point,
Point-to-multipoint
Let users transfer data between two buildings or multiple
buildings
Wireless
Connectivity
Channel Bandwidth
Selection
Using different bandwidth to reach varied distance
Support RSSI
Indicator (CB mode)
Users can select the best signal to connect with AP easily
Power-over-Ethernet
Flexible Access Point locations and cost savings. ANSEL
2012 must uses the adapter provided in the package.
Support Multi-SSID
Allow clients to access different networks through a single
access
function (4 SSID) in
AP
point and assign different policies and functions for each
SSID by
mode
manager
WPA2/WPA/ WEP/
IEEE 802.1x support
Fully support all types of security types.
MAC address
filtering in AP mode
Ensures secure network connection
PPPoE/PPTP
function
support (AP
Router/CR
Easy to access internet via ISP service authentication
mode)
SNMP Remote
Configuration
Management
Help administrators to remotely configure or manage the
Access Point easily.
QoS (WMM) support
Enhance user performance and density
1.2 Benefits
Access Point Mode
Use this feature to setup the access point‟s configuration
information. It has support adjusting transmit power and channel.
Client can access the network with different regulatory settings and
automatically change to the local regulations.
Client Bridge Mode
Use this feature to connect to an Access Point and enjoy the great
speed of surfing internet.
WDS Bridge Mode
Use this feature to link multiple APs in a network. All clients
associated with any APs can communicate each other like an
ad-hoc mode.
Client Router Mode
This feature functions completely opposite but similarly with AP
Router Mode. Client Router connected to an AP wirelessly and
transmits internet connection protocol through AP to access the
internet.
Multiple SSIDs
ANSEL 2012 supports up to 4 SSIDs on your access point. The
following options can be set to each SS to each SSID: -SSID for
public or private network -Authentication is fully supported -VLAN
identifier
--
Radius accounting identifier Profile isolation for infrastructure
network
VLAN
Specify a VLAN number for each SSID to separate the services
among clients.
QoS
Use this feature to limit the incoming or outgoing throughput.
Wi-Fi Protect
Access
Wi-Fi Protect Access is a standard-based interoperable security
enhancement that increases the level of data protection and
access control for existing and future wireless LAN system. It is
compatible with IEEE 802.11i standard WPA leverages TKIP and
802.1X for authenticated key management.
1.3 Package Contents
Open the package carefully, and make sure that none of the items listed below are
missing. Do not discard the packing materials, in case of return; the unit must be
shipped in its original package.
1* Wireless Outdoor Access Point / Client Bridge (ANSEL 2012)
1* 24V/1A Power Adapter
1* Ethernet Cable
1* QIG
1* CD (User Manual)
2* 5dBi 5GHz Dipole Antennas
Auction: Using other Power Adapter than the one included with ANSEL 2012 may
cause damage of the device.
1.4 System Requirement
The following conditions are the minimum system requirement.
A computer with an Ethernet interface and operating under Windows XP,
Vista, 7 or Linux.
Internet Browser that supports HTTP and JavaScript.
1.5 Hardware Overview
Hardware Specification
MCU/RF
Atheros AR2313+AR5112
Memory
32MB SDRAM
Flash
8MB
Physical Interface
1 x 10/100 Fast Ethernet RJ-45 1 x Reset Button 1 x Antenna Switch (
Internal and External Switch ) 2 x SMA Connector ( One is for 2.4GHz
and another is for 5GHz )
LED indicators
Power/ Status LAN (10/100Mbps) WLAN (Wireless is up) 3 x Link
Quality (Client Bridge mode) • Green: Good Quality • Yellow: Marginally
Acceptable Quality • Red: Bad Quality
Power Requirements
Active Ethernet (Power over Ethernet) Proprietary PoE design Power
Adapter 24V / 1A DC
Regulation Certifications
FCC Part 15C/15B/15E, EN301 893, EN 300 328, EN 301 489-1/-17,
EN60950, IC Certification
2 ANSEL 2012 Multi-Function Instruction Guide
2.1 Access Point
In the Access Point Mode with WDS Function, ANSEL 2012 function likes a central
connection for any stations or clients that support IEEE 802.11a/b/g network.
Stations and Client must configure the same SSID and Security Password to
associate within the range. ANSEL 2012 supports 4 different SSIDs to separate
different clients at the same time.
2.2 Access Point with WDS Function
ANSEL 2012 also supports WDS function in Access Point Mode without losing AP‟s
capabilities. Configure others Access Point‟s Wireless MAC Address in both
Access Point devices to enlarge the wireless area by enabling WDS Link Settings.
WDS function can support up to 8 different AP‟s MAC addresses.
Auction: Not every Access Point device has support WDS in Access Point Mode. It
is recommended using ANSEL 2012 if you would like to use this service.
2.3 Client Bridge
In the Client Bridge Mode, the ANSEL 2012 function likes a wireless dongle.
Connected to an Access Point wirelessly and surf internet whenever you want.
Using Site Survey to scan all the Access Point within the range and configure its
SSID and Security Password to associate with it. Connect you station to the LAN
port of the ANSEL 2012 via Ethernet.
2.4 WDS Bridge
In the WDS Bridge Mode, the ANSEL 2012 can wirelessly connect different LANs by
just simply configure each other‟s MAC Address and Security Settings. This mode is
used when two wired LANs locate in small distance and want to communicate each
other. The best solution is using ANSEL 2012 wirelessly connect two wired LANs.
WDS Bridge Mode can establish 16 WDS links. The connection diagram is like a
Star. Auction: WDS Bridge Mode is not function like Access Point. APs linked by
WDS are using the same frequency channel, more APs connected together may
lower throughput. Please be aware to avoid loop connection, otherwise you may
enable Spanning Tree Function.
2.5 Client Router
In the Client Router Mode, the ANSEL 2012 has DHCP Server build inside that
allows many LANs automatically generate an IP address to share the same Internet.
Connect an AP/WISP Wirelessly and connect to LANs via wired. Client Router Mode
is act completely opposite to the AP Router Mode.
3 Computer Settings
3.1 Assign a Static IP
In order to configure ANSEL 2012, please follow the instruction below:
1 In the Control Panel, double click Network Connections and then double click
on the connection of your Network Interface Card (NIC). You will then see the
following screen.
2 Select Internet Protocol (TCP/IP) and then click on the Properties button. This
will allow you to configure the TCP/IP settings of your PC/Notebook
3 Select Use the following IP address radio button and then enter the IP address
and subnet mask. Ensure that the IP address and subnet mask are on the same
subnet as the device.
4 Click on the OK button to close this window, and then close LAN properties
window.
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Ansel Drahtloser Zugangspunkt Handbücher
Beliebte Drahtloser Zugangspunkt Handbücher anderer Marken
D-Link
D-Link DWL-2100AP - AirPlus Xtreme G Bedienungsanleitung
Ubiquiti
Ubiquiti NanoStation NSM2 Bedienungsanleitung
Cisco
Cisco Aironet 1550 Series Bedienungsanleitung
Aruba
Aruba IAP-335 Bedienungsanleitung
Advantek Networks
Advantek Networks AWN-AP-54MR Bedienungsanleitung
IP-COM
IP-COM AP355 Bedienungsanleitung
Buffalo
Buffalo AirStation WLA-L11G Bedienungsanleitung
EnGenius
EnGenius EnStationACv2 Bedienungsanleitung
D-Link
D-Link DAP-3662 Bedienungsanleitung
xG Technology
xG Technology xMax CN1300 Bedienungsanleitung
Widelink
Widelink ezWave WAP-1100 Series Bedienungsanleitung
Edimax
Edimax CAP1200 Bedienungsanleitung
