ANTAIRA LMP-0804G-SFP Series Bedienungsanleitung

Antaira Technologies - Industrial Ethernet Switches

LMP-0804G-SFP Series User Manual V1.0

LMP-0804G-SFP Series

8-Port Industrial PoE+ Gigabit Managed Ethernet Switches

4*10/100/1000Tx (30W/Port), 4*100/1000 SFP Slots

Version 1.1

Hardware Manual

Antaira Technologies - Industrial Ethernet Switches

LMP-0804G-SFP Series Hardware Manual V1.1

This document contains information, which is protected by copyright. Reproduction, adaptation or translation

without prior permission is prohibited, except as allowed under the copyright laws.

Trademark Information

Antaira is a registered trademark of Antaira Technologies, LLC, Microsoft Windows and the Windows logo are the

trademarks of Microsoft Corp. NetWare is the registered trademark of Novell Inc. WMM and WPA are the

registered trademarks of Wi-Fi Alliance. All other brand and product names are trademarks or registered

trademarks of their respective owners.

translation without prior permission of Antaira Technologies, LLC is prohibited, except as allowed under the

Disclaimer

Antaira Technologies, LLC provides this manual without warranty of any kind, expressed or implied, including but

not limited to the implied warranties of merchantability and fitness for a particular purpose. Antaira Technologies,

LLC may make improvements and/or changes to the product and/or specifications of the product described in this

manual, without prior notice. Antaira Technologies, LLC will not be liable for any technical inaccuracies or

typographical errors found in this guide. Changes are periodically made to the information contained herein and

will be incorporated into later versions of the manual. The information contained is subject to change without prior

notice.

Antaira Technologies - Industrial Ethernet Switches

LMP-0804G-SFP Series Hardware Manual V1.1

iii

FCC Warning

This equipment has been tested and found to comply with the limits for a Class-A digital device, pursuant to Part

15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses, and can radiate radio frequency energy. It may cause

harmful interference to radio communications if the equipment is not installed and used in accordance with the

instructions. However, there is no guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television reception, which can be determined by turning

the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following

measures:

 Reorient or relocate the receiving antenna.

 Increase the separation between the equipment and receiver.

 Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

 Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications not expressly approved by the grantee of this device could void the user's

authority to operate the equipment.

CE Mark Warning

This is a Class-A product. In a domestic environment this product may cause radio interference in which case the

user may be required to take adequate measures.

Industrial Ethernet Switches

Industrial Grade Gigabit PoE Managed Ethernet Switches

Hardware Manual

Version 1.1 (January 2018)

This manual supports the following models:

 LMP-0804G-SFP

 LMP-0804G-SFP-T

This document is the current official release manual. Please check our website (www.antaira.com) for any

updated manual or contact us by e-mail ([email protected]).

Antaira Technologies - Industrial Ethernet Switches

LMP-0804G-SFP Series Hardware Manual V1.1

Table of Contents

Introduction ................................................................. 1

1.1 Product Overview 1

1.2 Product Software Features 1

1.3 Product Hardware Features 2

1.4 Package Contents 3

1.5 Safety Precaution 3

Hardware Description ................................................. 4

2.1 Physical Dimensions 4

2.2 Front Panel 5

2.3 Top View 5

2.4 LED Indicators 6

2.5 Reset Button 6

2.6 Ethernet Ports 7

2.7 Cabling 8

2.8 Wiring the Power Inputs 8

2.9 Wiring the Fault Alarm Contact 9

2.10 Grounding Note 9

Mounting Installation ................................................ 10

3.1 DIN-Rail Mounting 10

3.2 Wall Mounting 11

Hardware Installation ................................................ 12

4.1 Installation Steps 12

4.2 Maintenance and Service 13

Technical Specifications .......................................... 13

Antaira Technologies - Industrial Ethernet Switches

LMP-0804G-SFP Series Hardware Manual V1.1

Introduction

All Antaira industrial managed switches come with a pre-installed “user-friendly” web console

interface, which allows users to easily configure and manage the units, whether one is using a serial

console and command line interface(CLI) commands like Telnet, SSH, HTTP (Web GUI) or simple

network management protocols (SNMP).

1.1

Product Overview

Antaira Technologies’ LMP-0804G-SFP series is an 8-port industrial Gigabit PoE+ managed

Ethernet switch embedded with 4*10/100/1000Tx Ethernet ports that support IEEE802.3at/af for a

maximum of 30W/port and 4*100/1000 dual rate SFP slots for fiber connections. The LMP-0804G-

SFP is a fully manageable Layer 2 Ethernet switch that is pre-loaded with a user-friendly web

management console design. It supports the ring network redundancy function using the market’s

open standard ITU-T G.8032 ERPS (Ethernet Ring Protection Switch) protocol that has a <50ms

network recovery time. The advanced network filtering and security functions, such as, IGMP, VLAN,

QoS, SNMP, RMON, Modbus TCP, and 802.1X/HTTPS/SSH/SSL increase determinism and improve

network management for remote SCADA systems or control networks.

The LMP-0804G-SFP series is IP30 rated and DIN-rail mountable. There are also two wide operating

temperature models for either a standard temperature range (STD: -10°C to 70°C) or an extended

temperature range (EOT: -40°C to 75°C). It also provides high EFT and ESD protection for industrial

networking applications, such as, power/utility, water wastewater, oil/gas/mining, factory automation,

security surveillance, ITS and any other outdoor or harsh environment.

1.2

Product Software Features

 Network Redundancy



STP, RSTP, MSTP, ITU-T G.8032 Ethernet Ring Protection Switch (ERPS) for

network redundancy

 Network Management



Web UI based management, SNMP v1/v2/v3, Serial Console



Qos, traffic classification QoS, Cos, bandwidth control for Ingress and Egress,

broadcast storm control, Diffserv



IEEE802.1q VLAN tagging, port-based VLAN support

Antaira Technologies - Industrial Ethernet Switches

LMP-0804G-SFP Series Hardware Manual V1.1



IGMP snooping v1/v2, IGMP filtering / throttling, IGMP query up to 256 group



Supports IPv4/IPv6, RMON, MIB II, port mirroring, event syslog, DNS, NTP/SNTP,

HTTPS, SSH/SSL, TFTP



MODBUS TCP for SCADA system integration

 Port Configuration



Status, statistics, mirroring, rate limiting, event syslog

 Event Handling



Event notification by Email: Cold/Warm Start, Power Failure, Authentication, SNMP

trap and Fault Alarm Relay Output

 Software Upgrade via TFTP and HTTP

 Configuration Backup – USB Port

1.3

Product Hardware Features

 System Interface and Performance



All RJ-45 ports support Auto MDI Function



Embedded 4*10/100/1000Tx (PSE 30W/Port) RJ45 Ports and 4*100/1000 SFP slots for

fiber



Store-and-forward switching architecture



8K MAC address table



Power line EFT protection: 2,000VDC; Ethernet ESD protection: 6,000VDC

 Power Input



DC 48~55V redundant with a 6-pin removal terminal block



One user programmable alarm relay contact



The power input specification is complied with the requirements of SELV (Safety Extra Low

Voltage), and the power supply should be complied with UL 61010-1 & UL 61010-2-201

 Operating Temperature



Standard operating temperature models: -10°C to 70°C



Extended operating temperature models: -40°C to 75°C

 Case/Installation



IP-30 protection metal housing



DIN-Rail and wall mount design



Installation in a Pollution Degree 2 industrial environment

Antaira Technologies - Industrial Ethernet Switches

LMP-0804G-SFP Series Hardware Manual V1.1

1.4

Package Contents



1– LMP-0804G-SFP series: 8-port industrial gigabit PoE+ managed Ethernet switch, with

4*10/100/1000Tx (PSE 30W/Port) and 4*100/1000 SFP slots for fiber connectivity





1-Product CD





2-W all mounting brackets and screws





1-RJ45 to DB9 Serial Console cable





1-DC cable –18 AWG & DC jack 5.5x2.1mm



1.5

Safety Precaution

Attention: If the DC voltage is supplied by an external circuit, please use a protection

device on the power supply input. The industrial Ethernet switch’s

hardware specs, ports, cabling information, and wiring installation will be

described within this user manual.

Warning Labels

The caution label means that you should check the certain information on user manual when working with

the device. (Shown in Figure 1.1)

Figure 1.1 - Caution Label

This warning label is on the device, and means that the surface of the device is hot. (Shown in Figure 1.2)

Figure 1.2 - Hot Surface Warning Label

Antaira Technologies - Industrial Ethernet Switches

LMP-0804G-SFP Series Hardware Manual V1.1

Hardware Description

2.1

Physical Dimensions

Figure 2.1, below, shows the physical dimensions of Antaira’s LMP-0804G-SFP series: 8-port

industrial gigabit PoE+ managed Ethernet switches with 4*10/100/1000Tx ports and

4*100/1000Fx SFP slots.

(W x D x H) is 54mm x 99mm x 142mm

Figure 2.1

LMP-0804G-SFP Series Physical Dimensions

Antaira Technologies - Industrial Ethernet Switches

LMP-0804G-SFP Series Hardware Manual V1.1

2.2

Front Panel

The front panel of the LMP-0804G-SFP series industrial gigabit PoE+ managed Ethernet switch is

shown below in Figure 2.2.

6-Pin Removal Terminal Block (Power Input)

Grounding Screw

LED for PWR1, PWR2, and Fault

LAN Port # 5~8 – 100/1000 SFP Slots

Console Port

USB Backup

Hard (Physical) Reset Button

LAN Port (1~4) 10/100/1000Tx

LED for 10/100/1000Tx Network Speed Status

LED for PoE Activity

Figure 2.2

The Front Panel of LMP-0804G-SFP Series

2.3

Top View

Figure 2.3, below, shows the top panel of the LMP-0804G-SFP series switch that is

equipped with one 6-pin removal terminal block connector for dual DC power inputs

48~55VDC.

Figure 2.3

Top Panel View of LMP-0804G-SFP Series

2.4

LED Indicators

There are LED light indicators located on the front panel of the industrial Ethernet switch that

display the power status and network status. Each LED indicator has a different color and has

its own specific meaning, see below in Table 2.1.

Antaira Technologies - Industrial Ethernet Switches

LMP-0804G-SFP Series Hardware Manual V1.1

LED Color Description

Green On Power input 1 is active

Off Power input 1 is inactive

Green On Power input 2 is active

Off Power input 2 is inactive

Fault

Green

Red

Green Power input 1 or 2 is inactive

Red An applied alarm (such as port disconnect) has been

triggered

Off Power input 1 and 2 are both functional and no

active/port alarm is detecting errors

Owner

Green On ERPS Owner Mode (Ring Master) is ready

Off ERPS Owner Mode is not active

Ring

Green On Ring Network is active

Off Ring Network is not active

LAN Port 5~8

Link/ACT

(SFP Port)

Green

On Connected to Network

Flashing

Network is active

Off Not Connected to Network

LAN Port 1 ~ 4

(Left LED)

Green

On Connected to network, 10/100/1000Mbps

Flashing

Networking is active

Off Not connected to network

LAN Port 1~ 4

(Right LED)

PoE Indicators

Green

On The port is supplying power to the powered-device

Off No powered-device attached or power supplying fails

Table 2.1 - LED Indicators for LMP-0804G-SFP Series

Caution: "P1" is the abbreviation for "Power ", “P2” is for “Power 2”, “LNK” is for “Link”, and "ACT" is for

"Activity".

2.5

Reset Button

There is a ‘Reset’ button located on the front panel of the industrial Ethernet switch that helps

users to reboot, restore default, or save running configurations by pressing the button for

different seconds. Please refer to Table 2.2 for the timing and function.

Seconds Function

Save running configuration to USB

4-6 Reboot the switch

7 or more Restore factory default

Table 2.2 – Reset Button Functions

Andere Handbücher für LMP-0804G-SFP Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere ANTAIRA Schalten Handbücher

ANTAIRA

ANTAIRA LMX-0602-V2 Series Bedienungsanleitung

ANTAIRA

ANTAIRA LMX-1204G-SFP Series Bedienungsanleitung

ANTAIRA

ANTAIRA LMP-0501 V2 Bedienungsanleitung

ANTAIRA

ANTAIRA LMP-0602-24 Series Bedienungsanleitung

ANTAIRA

ANTAIRA LNX-1204G-SFP Series Bedienungsanleitung

ANTAIRA

ANTAIRA LMP-1802G-SFP Series Bedienungsanleitung

ANTAIRA

ANTAIRA LNP-2602G-SFP Series Bedienungsanleitung

ANTAIRA

ANTAIRA LMP-1204G-SFP-bt-24 Series Bedienungsanleitung

ANTAIRA

ANTAIRA LNX-1604G-SFP Series Bedienungsanleitung

ANTAIRA

ANTAIRA LMP-1802G-M12-10G-SFP-67-24 Series Bedienungsanleitung

ANTAIRA

ANTAIRA LMP-2004G-SFP Series Bedienungsanleitung

ANTAIRA

ANTAIRA LMP-1204G-SFP-bt Series Bedienungsanleitung

ANTAIRA

ANTAIRA LMP-0501 Series Bedienungsanleitung

ANTAIRA

ANTAIRA LNX-C800 Series Bedienungsanleitung

ANTAIRA

ANTAIRA USB-HUB4K Bedienungsanleitung

ANTAIRA

ANTAIRA LNX-1802G-SFP Series Bedienungsanleitung

ANTAIRA

ANTAIRA LNP-1002G-10G-SFP-24 Bedienungsanleitung

ANTAIRA

ANTAIRA LNP-1002G-SFP-T-CC Bedienungsanleitung

ANTAIRA

ANTAIRA LMP-0600-24-V2 Series Bedienungsanleitung

ANTAIRA

ANTAIRA LMX-1202M-SFP Series Bedienungsanleitung

ANTAIRA

ANTAIRA LNP-1002C-SFP-T Bedienungsanleitung

ANTAIRA

ANTAIRA LNX-2012GN-SFP Bedienungsanleitung

ANTAIRA

ANTAIRA LMX-0600 Series Bedienungsanleitung

ANTAIRA

ANTAIRA LMP-C602G-SFP-bt-V2 Series Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung

Cabletron Systems

Cabletron Systems GIGAswitch GSR-16 Bedienungsanleitung

Cisco

Cisco Catalyst X4448 Handbuch