Antec Nineteen Hundred Bedienungsanleitung

NINETEEN

HUNDRED

User

Manual

Nineteen Hundred User Manual

Congratulations on your purchase of the Antec Nineteen Hundred!!

Meet the Nineteen Hundred, a case engineered for performance and built to enclose the ultimate PC.

It is an unbeatable enclosure that delivers a combination of cooling, performance, and convenience and

stands head and shoulders above the competition.

With 9 expansion slots, the Nineteen Hundred features an advanced cooling system for graphics cards

up to 330 mm (13.0 inches) in length. Dual-layer mesh provides a stylish and new fashion into computer

hardware. Nineteen Hundred has use many silicone grommets technology to limit vibrations.

In addition, Its comes with 4 advance silent Fluid Dynamic bearing chassis fan which can provide lowest

fan acoustic to under 18dB (A). Finally, the Nineteen Hundred is constructed of durable SECC steel that

lasts for builds to come. Along with pioneering design and solid construction the Nineteen Hundred is

the last word in ultimate PC builds

At Antec, we continually refine and improve our products to ensure the highest quality. As such, your

new chassis may differ slightly from the description in this manual due to improvements applied for the

optimal building experience. As of November 15, 2011, all features, descriptions, and illustrations in this

manual are correct.

Disclaimer

This manual is intended only as a guide for Antec’s computer

enclosures. For more comprehensive instructions on installing the

motherboard and peripherals, please refer to the manuals that

come with those components.

Table of Contents

Section 1: Introduction

1.1 Getting to Know Your Chassis............................................................................5

1.2 Chassis Specifications.........................................................................................6

1.3 Included Screws .................................................................................................6

1.4 Before You Begin................................................................................................7

Section 2: Hardware Installation

2.1 Setting Up ..........................................................................................................9

2.2 Motherboard Installation...................................................................................9

2.3 Installing KUHLER H2O Liquid Coolers................................................................11

2.4 Power Supply Installation ..................................................................................12

2.5 External 5.25” Device Installation......................................................................13

2.6 Internal 3.5” / 2.5” Device Installation ..............................................................15

2.7 Cable Management............................................................................................17

Section 3: Front I/O Ports

3.1 USB 2.0...............................................................................................................19

3.2 USB 3.0...............................................................................................................19

3.3 AC’97 / HD Audio Ports......................................................................................20

3.4 Power Switch / Reset Switch / Hard Disk Drive LED Connectors.......................20

3.5 Rewiring Motherboard Header Connections.....................................................21

Section 4: Cooling System

4.1 Included Fans .....................................................................................................23

4.2 Optional Fans .....................................................................................................23

4.3 Fan Switch Controller.........................................................................................24

4.4 Air Filters............................................................................................................25

Section 1

Introduction

NINETEEN HUNDRED User Manual

1.1 Getting to Know Your Chassis

1. 3 x 5.25” external tool-less drive bays

2. 12 x 3.5/2.5” internal drive bays

3. 2 x 2.5” internal drive bays

4. 3 x 120 mm front intake fans

5. 2 x 120 mm HDD internal fan mounts

6. 1 x 120 mm Rear exhaust fan

7. 2 x 120 mm top exhaust fans

8. Motherboard Mount: SSI CEB, E-ATX, ATX, Micro ATX, Mini-ITX

9. CPU cutout

10. Extra large cable routing space≦30mm

11. Power supply mount: ATX/ESP standard PSU x 2

12. Front Ports: 4 x USB3.0, 2x USB2.0, Audio In/Out

1.2 Chassis Specifications

Chassis Type

Super Full Tower

Chassis Color

Green / Red

Dimensions

27.4” (H) x 8.8” (W) x 21.8” (D)

696 mm (H) x 223.6 mm (W) x 555 mm (D)

Weight

29.4 lbs / 13.36 kg

Cooling

Fan mounts:

- 3 x 120 mm front intake fan mounts

- 2 x 120 mm HDD internal fan mounts

- 1 x 120 mm Rear exhaust fan mounts

- 2 x 120/140 mm top exhaust fan mounts

Included Fan:

- 3x 120mm front intake FDB silent fan, 1200 r. p. m , 18dB

- 1 x 120mm rear exhaust FDB silent fan, 1200 r. p. m,18dB

- 2 x 120mm top exhaust FDB silent fan, 1200 r. p. m, 18dB

Drive Bays

- 3 x 5.25" tool-less drive bays

- 12 x 3.5" / 2.5” tool-less HDD bays

- 2 x 2.5” HDD bays

Expansion Slots

Motherboard Size

SSI CEB, E-ATX, Standard ATX, microATX, Micro ATX, Mini-ITX

Front I/O Panel

- 4 x USB 3.0 with internal motherboard connector

- 2 x USB 2.0

- Audio In/Out

- Power and Reset buttons located on front panel of chassis

1.3 Included Screws

An inventory of all screws and intended usage and quantity is provided here:

A. Front fan screw (4)

B. HDD screw (50)

C. CD-ROM screw (6)

D. Motherboard screw (13)

E. Motherboard standoff(4)

F. Power supply screw(4)

G. 2.5” tray-mount screw (16)

H. Fan screw for HDD tray (4)

1.4 Before You Begin

In order to ensure that your building experience with the NINETEEN HUNDRED will be a positive one,

please take note of the following:

While working inside your NINETEEN HUNDRED, keep your chassis on a flat, stable surface.

Make sure your build environment is clean, well-lit, and free of dust.

Antec chassis feature rounded edges that minimize the occurrence of hand injuries. Nonetheless,

exercise caution and control when handling chassis interiors. We strongly recommend taking the

appropriate time and care when working inside the chassis. Avoid hurried or careless motions.

Handle components and cards with care. Do not touch the unshielded components or contacts

on a card. Hold a card by its edges. Hold a component such as a processor by its edges, never by

its pins.

To avoid electrostatic discharge, ground yourself periodically by touching an unpainted metal

surface (such as a connector or screw on the back of this computer) or by using a wrist

grounding strap.

Before you connect a cable, ensure that both connectors are correctly aligned and oriented.

Bent pins can be difficult to fix and may require replacement of the entire connector.

This manual is not designed to cover CPU, RAM, or expansion card installation. Please consult

your motherboard manual for specific mounting instructions and troubleshooting. Before

proceeding, check the manual for your CPU cooler to find out if there are steps you must take

before installing the motherboard.

Do not sit on your chassis. Although it is constructed of heavy-duty steel and internally

reinforced, it is not designed to support the weight of an adult, and may buckle.

Remember to use the right tools for each task. Do not use improvised screwdrivers like coins,

nails or knife blades as they may result in damage to screw threads or even injury. Do not use

your fingernails to separate edges or lift the sides of the chassis, as paint chipping or injury may

occur.

Section 2

Hardware Installation

NINETEEN HUNDRED User Manual

2.1 Setting Up

Put the case upright on a flat, stable surface so that the rear

panel (power supply and expansion slots) is facing you.

To remove the left and right side panels, remove these

thumbscrews first.

Note: Place the panel thumbscrews aside carefully and

remember where they are.

Remove the panel by gripping the end of the panel at the top

& bottom and swinging the panel outward.

Do not pull the panel back toward the rear of the chassis.

CAUTION: Do not use your fingernails to pry or lift the panels.

Damage to the panels or

injury to your fingernails may result.

2.2 Motherboard Installation

Before proceeding:

Check the manual for your CPU cooler to find out if there are steps you must do before installing the

motherboard.

Make sure you have the correct I/O panel for your motherboard. If the panel provided with the chassis

isn’t suitable, please contact your motherboard manufacturer for the correct I/O panel.

Make sure you have the correct I/O panel.

Remove the panel by the end of the panel at the top & bottom and

swing the panel outward.

The NINETEEN HUNDRED comes with 9 preinstalled motherboard standoffs. These are positioned for

Standard ATX motherboards but can be relocated to accommodate other form factors.

1. Align the motherboard with the

standoff holes on the motherboard tray and

remember or mark which holes are lined up

2. Install standoffs as needed and put the motherboard

in.

3. Screw your motherboard into the standoffs with the provided motherboard mounting screws.

Install the motherboard standoffs by aligning the motherboard with

the standoff holes.

CAUTION

Make sure to remove any unused motherboard

standoffs. They may come into contact with the back of

the motherboard and may electrify your chassis

exterior if left connected.

Use the provided motherboard mounting screws to secure your

motherboard into the standoffs.

Inhaltsverzeichnis

Andere Antec Computerzubehör Handbücher

Antec

Antec TWO HUNDRED Bedienungsanleitung

Antec

Antec DF-500 Technisches Handbuch

Antec

Antec Quiet Computing 0761345-02220-0 Bedienungsanleitung

Antec

Antec SX1000II Series Bedienungsanleitung

Antec

Antec NSK 4480 Bedienungsanleitung

Antec

Antec New Solution NSK 3400 Bedienungsanleitung

Antec

Antec NSK 4000 II Bedienungsanleitung

Antec

Antec Nine Hundred Bedienungsanleitung

Antec

Antec TAKE 3 3U RACKMOUNT CASE Bedienungsanleitung

Antec

Antec KS 282 Bedienungsanleitung

Antec

Antec Quiet Computing 0761345-03203-2 Bedienungsanleitung

Antec

Antec Solo Bedienungsanleitung

Antec

Antec New Solution NSK4000 Bedienungsanleitung

Antec

Antec TITAN550 Bedienungsanleitung

Antec

Antec Plus1000 Series Bedienungsanleitung

Antec

Antec VSK-2000 Bedienungsanleitung

Antec

Antec NSK 4480 II Bedienungsanleitung

Antec

Antec Solo Bedienungsanleitung

Antec

Antec SONATA II Bedienungsanleitung

Antec

Antec ARIA Bedienungsanleitung

Antec

Antec Nine Hundred Bedienungsanleitung

Antec

Antec Three Hundred Two Bedienungsanleitung

Antec

Antec Sonata III Bedienungsanleitung

Antec

Antec SLK3700-BQE Bedienungsanleitung

Beliebte Computerzubehör Handbücher anderer Marken

Motorola

Motorola ATRIX Bedienungsanleitung

HP USB Media Docking Station Bedienungsanleitung

Cherry

Cherry B.UNLIMITED 3.0 Bedienungsanleitung

Logitech

Logitech IO2 Bedienungsanleitung

ARM

ARM DSTREAM-ST Bedienungsanleitung

Bartec

Bartec TC 7 Series Bedienungsanleitung

Philips

Philips SPC3540 Bedienungsanleitung

Logitech

Logitech mk220 Bedienungsanleitung

SilverStone

SilverStone LC02 Bedienungsanleitung

Flexispot

Flexispot ML2B Bedienungsanleitung

Hamlet

Hamlet UNIVERSAL COVER 101 KBT2 Bedienungsanleitung

Adam Equipment

Adam Equipment RS-485 Bedienungsanleitung

Vivo

Vivo MOUNT-KB05-4DW Bedienungsanleitung

Kvaser

Kvaser Memorator Professional Bedienungsanleitung

DRC

DRC D-Imaging Bedienungsanleitung

Sven

Sven Base 305 сombo Bedienungsanleitung

Hama

Hama 108310 Bedienungsanleitung

SpeechWare

SpeechWare FlexyMike FMK03 Bedienungsanleitung