Antec HCG-400M Bedienungsanleitung

HCG-400MPOWER SUPPLY

USER’S MANUAL

HCG MSERIES

HCG-400MPOWER SUPPLY

ELITE POWER MEETS UNRIVALED PERFORMANCE

Antec’s HCG M power supplies are the perfect combination of power and efficiency. The HCG M features special

heavy-duty High Current connectors and cabling that supply extreme levels of power, and superb efficiency thanks

to 80 PLUS® Bronze certification and Active PFC. Highest-quality connectors, Japanese-brand capacitors, and a

quiet 135 mm double ball bearing fan complete the package. The HCG-400M features High Current Cable

Management and 10-pin modular connectors. If loads of power, High Current engineering and extreme efficiency

are what you’re after, the HCG M is the PSU for you.

STANDARDS AND FEATURES

The connectors and power specifications of the HCG-400M PSU are all compatible with ATX12V v2.32 and EPS12V

v2.92 specifications. The HCG-400M features Universal Input, which automatically senses when you connect the

power supply to any AC power source between 100 - 240V without setting a voltage switch. This power supply also

features Active Power Factor Correction (PFC), which improves the power factor value of the power supply by

altering the input current wave shape, helping to power transmission across the grid.

SYSTEM PROTECTION

A variety of industrial-grade safety circuitry will help protect your computer: Over Current Protection (OCP), Over

Voltage Protection (OVP), Under Voltage Protection (UVP), Short Circuit Protection (SCP), Over Power Protection

(OPP) and Surge & Inrush Protection (SIP). Sometimes the PSU will “latch” into a protected state. You will need to

power off the PSU and clear the fault before it will function again. There are no user-replaceable fuses in your

HCG-400M.

80 PLUS® CERTIFICATION

80 PLUS® certification is the most widely recognized

independent standard in power supply efficiency. An 80

PLUS® certified power supply uses less energy and

generates less heat to stay cooler, run quieter and last

longer. The HCG-400M has been 80 PLUS® Bronze

certified to be at least 82% efficient at a wide range of

operating loads; this will lower your operating costs and

help protect the environment.

POWER OUTPUT

To see the output capacity and regulation for each different voltage, see table 1.

TABLE 1

Output Voltage

Load Max.

Regulation

Ripple & Noise

+3.3V

20A

±5%

< 50 mV

+5V

20A

±5%

< 50 mV

+12V

30A

±5%

< 120 mV

-12V

0.8A

±5%

< 120 mV

+5VSB

2.5A

±5%

< 50 mV

INTELLIGENT HYBRID CABLE MANAGEMENT

The HCG-400M uses Intelligent Hybrid Cable Management. Cables that are important or mandatory are

permanently connected to the PSU for the highest quality power delivery. There are modular jacks on the back of

the PSU to add additional cables as needed. Using only the cables you need will reduce clutter and improve airflow

inside your case. For the list of connected and optional cables, see table 2.

MODULAR CABLE JACKS

There are two 5-pin black jacks and four 10-pin red jacks on the back of your HCG-400M PSU. These jacks are for

the optional cables that come with your power supply. A modular 10-pin connector system allows you plug 5-pin

connectors into the 10-pin jacks if you run out of 5-pin jacks.

TABLE 2

Cable Quantity

Power Connectors

Description

N/A

Fixed cables

24 (20+4)-pin main connector

1x 8 (4+4)-pin ATX12V/EPS12V

8 (6+2)-pin PCI-E

Molex + FDD

SATA + Molex

SATA

x 1

x 3

x 1

x 3

x 1

INSTALLATION:

1. Install the PSU into either the top or bottom of your case with the four screws provided. Refer to your case

manual if you are unsure where the power supply should be installed.

2. Connect the 24-pin main power connector to your motherboard. If your motherboard uses a 20-pin

connector, detach the 4-pin attachment on the 24-pin connector.

Note: The detachable 4-pin section cannot be used in place of a 4-pin +12V connector.

3. Connect the 8-pin or 4+4-pin connector for the CPU. If your motherboard has an 8-pin socket with a cover on

some of the openings, we recommend that you remove the cover and use the 8-pin connector.

Note: Please also refer to your motherboard user’s manual for any special instructions.

4. Connect extra cables from the cable pack to the sockets on the power supply only if needed. If you are going

to plug the PCI-E cables into the PSU, they should go into the red sockets. If the red sockets are not being used

for PCI-E, then they can be used for any other type of cable supplied in the pack that accompanies the PSU.

5. Connect the AC power cord to the power supply AC inlet. Be sure to use the heavy-duty cord supplied with

your PSU.

6. PCI-E graphics cards use different amounts of power. For some, a single 6-pin connector is sufficient, making

the hardwired connector the preferred choice. More powerful cards use multiple connectors, including the

advanced 8-pin PCI-E connector. The 8-pin PCI-E connector on the PSU can be used as either a 6- or 8-pin

connector.

7. Hard drives, optical drives (CD/DVD/BluRay™) and other accessories will use either the older 4-pin Molex

connector or the newer 15-pin SATA connector. 4-pin Molex connectors have two black, one yellow and one

red wire. The SATA connector has an additional orange power wire.

8. When you have all the connections secured, turn the switch on the PSU to the “|” position.

Technical Support:

www.antec.com/support

US & Canada

1-800-22ANTEC

nasupport@antec.com

Europe

+49-(0)40-226-139-22

[email protected]m

Asia

apsupport@antec.com

Visit us on Facebook for contests, information & support:

USA & Canada

facebook.com/AntecInc

Europe

facebook.com/AntecEurope

Australia & New Zealand

facebook.com/AntecAU

India

facebook.com/AntecIndia

facebook.com/AntecUK

Antec, Inc.

47900 Fremont Blvd.

Fremont, CA 94538

USA

tel: 510-770-1200

fax: 510-770-1288

Antec Europe B.V.

Stuttgartstraat 12

3047 A Rotterdam

The Netherlands

tel: +31 (0) 10 462-2060

fax: +31 (0) 10 437-1752

www.antec.com

Specifications are subject to change without prior notice. Actual product(s) and accessories may differ from illustrations. Omissions and printing

errors excepted. Content of delivery might differ in different countries or areas. Some trademarks may be claimed as the property of others.

REPRODUCTION IN WHOLE OR IN PART WITHOUT WRITTEN PERMISSION IS PROHIBITED.

V1.0

Inhaltsverzeichnis

Andere Antec Stromversorgung Handbücher

Antec

Antec EarthWatts 750 Green Bedienungsanleitung

Antec

Antec ISK 300-65 Bedienungsanleitung

Antec

Antec TruePower TRUE330 Bedienungsanleitung

Antec

Antec VP650PM Bedienungsanleitung

Antec

Antec TruePower Classic TP-550C Bedienungsanleitung

Antec

Antec HCG-620 Bedienungsanleitung

Antec

Antec EA-430D Green Bedienungsanleitung

Antec

Antec HCP-750 Bedienungsanleitung

Antec

Antec SMARTPOWER SP-400 Bedienungsanleitung

Antec

Antec EA-380D GREEN Bedienungsanleitung

Antec

Antec TruePower Trio 430 Wat Bedienungsanleitung

Antec

Antec PowerUp 6000 Bedienungsanleitung

Antec

Antec HCP-1200 Bedienungsanleitung

Antec

Antec PHANTOM 350 Bedienungsanleitung

Antec

Antec Basiq BP350 Bedienungsanleitung

Antec

Antec NEO ECO 450C Bedienungsanleitung

Antec

Antec BASIQ BP-500U Bedienungsanleitung

Antec

Antec TruePower Gold TP-550G Bedienungsanleitung

Antec

Antec HCG-520 Bedienungsanleitung

Antec

Antec EA-650 PLATINUM Bedienungsanleitung

Antec

Antec EA-650 Platinum Bedienungsanleitung

Antec

Antec NSK2400 Bedienungsanleitung

Antec

Antec HCG-400 Bedienungsanleitung

Antec

Antec SMARTPOWER 2.0 Bedienungsanleitung

Beliebte Stromversorgung Handbücher anderer Marken

Monacor

Monacor PS-12CCD Bedienungsanleitung

VOLTIMA

VOLTIMA MagicBox 15 Bedienungsanleitung

Agilent Technologies

Agilent Technologies 6032A Bedienungsanleitung

Miller

Miller Auto Deltaweld 452 Bedienungsanleitung

BCP

BCP PUOUBK Merkblatt

HC 2210 Bedienungsanleitung

Puls

Puls CT5.241 Bedienungsanleitung

OCZ

OCZ ZX1250W Bedienungsanleitung

iseg

iseg ECH 238 Bedienungsanleitung

Power

Power XXL A Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies 6631B Bedienungsanleitung

Renogy

Renogy PHOENIX 300 Bedienungsanleitung

HP 6200B Service-Handbuch

Epson

Epson Stylus Scan 2500 Betriebsanleitung

Pulsar

Pulsar GREEN POWER CCTV PoE POE044816 Bedienungsanleitung

Puls

Puls MiniLine ML50.100 Bedienungsanleitung

Puls

Puls AS-Interface SLA4.100 Bedienungsanleitung

Kenwood

Kenwood PS-60 Bedienungsanleitung