Steps to get your BLE-485 Adaptor up and running:
1. Install lithium AA Baery.
2. Turn on BLE-485 Adaptor.
3. Install Bluetooth 4.0+ dongle on computer.
4. Donwload Anuracom Ulity.
5. Install Anuracom Ulity.
6. Connect BLE-485 adaptor to Anuracom Ulity.
7. Connect BLE-485 adaptor to device/sensor.
8. Start serial applicaon (if available).
INSTALL AA BATTERY
Unscrew boom
Install AA baery in circuit board as shown.
Screw boom back on unl secure.
TURN ON BLE-485 ADAPTOR
INSTALL BLUETOOTH 4.0+ DONGLE
ON COMPUTER
Turn ON your adaptor by twisng clockwise unl ON
A blue signal light will flash (for one minute only) when first
turned on. UNIT WILL REMAIN ON unless manually turned off.
Turn OFF your adaptor (for long term storage) by twisng
counter-clockwise 1 quarter of a turn or unl ght.
Turn OFF then ON to reboot LED signal.
Need help? Call us: +1 425.890.8221
anuraco.com / support@anuraco.com
BLE-485 Bluetooth Adaptor connects your bluetooth enabled
computer or smartphone to field devices for hands free monitoring.
Included in your package:
1 AA 3.6 VDC Lithium baery
1 BLE-485 bluetooth adapter
1 USB/BLE 4.0 adapter for Windows
Access to www.anuraco.com/registraon/
to download ulity soware & full manual
BLE-485 BLUETOOTH ADAPTOR OVERVIEW
Bluetooth 4.0+ dongle
Windows 7 or 10 computer
1
2
3
4
Insert Bluetooth dongle.
Follow device install instrucons.
Locate device name (Control Panel > Devices and Printers )
and write down below. Will need for ulity install.
Bluetooth Device Name__________________________
DOWNLOAD ANURACOM UTILITY
Go to www.anuraco.com/registraon
Register your device and download soware and full manual.
3.6V
+-
Need help? Call us: +1 425.890.8221
anuraco.com / support@anuraco.com
