1 Year Limited Warranty L100D II
Dead Bolt Backset
1) The backset is at the 60mm(2 3/8’’) position,
when the product is shipped from the factory.
Insert a flat screwdriver into driving board hole,
turn driving board to let the Dead Bolt head draws in.
2)Pull regulator pin up, firmly hold driving board
and driving spring and pull right untill the 70mm
(2 3/4’’) screw hole coincides with driving board
hole.
3)The backset is in 70mm (2 3/4”) position
New Door Preparation
4
Pinch Screw
Hole
60
70
s
Dead Bolt
Head
Driving
Board Hole
Turn
Pull
70 60 70 60
Anviz Global Inc., (the “Company”) warrants to the original purchaser that the
Company’s products for one (1) year from the date of purchase to be free of
structural and mechanical defects due to faulty materials or workmanship
under normal use and service.
This warranty gives you specific legal right, and you may also have other right as
otherwise permitted by law. If this Product is considered a consumer product,
Please be advised that some laws do not allow limitations on incidental or
consequential damages or how long an implied warranty lasts. So that the above
limitations may not full apply. Refer to your local laws for your specific right under
this warranty.
Please register your product at http://www.anviz.com/members/login.html for
follow warranty service and technical support service.
All defective products must notify the Company’s International Support
Department, The International Support Department will decide to either have
the product returned for repair or replacement. The defective product must be
returned to the Company within thirty (30) days of failure and with a
description of the failure and Return Merchandise Authorization (RMA) number
supplied by the Company. To receive a RMA number and obtain assistance on
product returned with out RMA will be refused. During the warranty period,
the Company agrees to repair or replace, at its sole option, without charge to
Original Purchaser, any defective component part of the hardware. To obtain
service, Original Purchaser must return the hardware to the Company in
original product packaging or in an adequate container for shipping. The
postage, shipping, and insurance charges incurred in shipping to the Company
will be paid by Original Purchaser, and all risk for the hardware shall remain
with the Original Purchaser until such time as Company takes receipt of the
hardware. Upon receipt, the Company will promptly repair or replace the
defective unit, and then return said unit to Original Purchaser, postage and
shipping prepaid. The Company may use reconditioned or like-new parts or
units, at its sole option, when repairing any hardware. Repaired products shall
carry the same amount of outstanding warranty as from original purchase, or
ninety (90) days, whichever is greater. Any claim under the warranty must
include dated proof of purchase or invoice. In any event, the Company's
liability for defective hardware is limited to repairing or replacing the
hardware.
For Warranty Service
What Does This Warranty Not Cover?
The following costs expenses and damages are not covered by the provisions of this
limited warranty:
(1) Shipping and freight expenses required to return the Company.
(2) Failures, defects, or damage (including, but not limited to, any security failure or
loss of data) caused by any third party product, service, or system connected or
used in conjunction with the Product.
(3) Any other incidental, indirect, special or punitive damages, whether based on
contract warranty, tort (including, but on limited to, strict liability or negligence)
patent infringement, or otherwise, even if advised of the possibility of such
damages.
(4) The Product use for purposes for which they are not designed or intended.
(5) The Product which have been subjected to alteration, abuse, misuse, negligence
or accident.
(6) The product has been improperly stored, installed, maintained or operated.
(7) The product has been used in violation of written instructions provided by the
Company.
(8) The product has been subjected to improper temperature, humidity or other
environmental conditions or which, based on the Company’s examination, do not
disclose to the Company’s satisfaction non-conformance to the warranty.
Additionally, this warranty DOES NOT COVER scratches abrasions or deterioration
due to the use of paints, solvents or other chemicals.
Note: Register your product at http://www.anviz.com/members/login.html
-3-
