AnyTone AT-500M Bedienungsanleitung

Qixiang Electon Science & Technoloyg Co.,Ltd.

www.anytone.net

A1.190716

10 METER RADIO

AT-500M

Instruction Manual

1AT-500M

Down UP

Microphone cable

Mic

PTT

Connector

1. KNOW ABOUT THIS RADIO

1 Mode/Keypad lock

2 Squelch control, SQ, ASQ switch key

3 Microphone Jack

4 Channel up selector

5 Channel down selector

6 Emergency channel

7 Power On/Off Volume control

8 External speaker Jack

9 Antenna Jack

ANT

POWER

EXT.SP

EMG

VOL

SQ/AQ

AM/FM

HI-CUT

RF Gain

Automatical Squelch

Noise Blanker

TALKBACK

Roger Beep

PA/AM/FM mode

TX/RX S-meter

Channel/Frequency

Offset Direction

CTCSS DCS VOX

-5K

Alpha channel

High power

Middle power

Key lock

Beep sound

Emergency channel

BAND name

Channel

/Menu

Function and Features

7 COLOR DISPLAY

OFFSET FUNCTION

AM/FM/PA MODE

SQ, ASQ FUNCTION

10.

RF GAIN FUNCTION

11.

12.

SCAN FUNCTION

13.

RB FUNCTION

14.

NB FUNCTION

15.

DUAL-WATCH FUNCTION

16.

BEEP SOUND

17.

18.

TOT FUNCTION

HI-CUT FUNCTION

EMG CALL

CTCSS/DCS CODE ( OPTIONAL)

KEY LOCK FUNCTION

BUILT IN 12/24V CONVERTOR (OPTIONAL)

VOX FUNCTIONS( TRANSMIT WITHOUT PRESS PTT)

19.

20.

SUIT DYMATIC AND ELECTRONIC MICROPHONE

BACKLIGHT BRIGHTLESS ADJUSTABLE

-5KHZ FUNCTION

AT-500M 2

2. LCD

HI-CUT

RF Gain

Automatical Squelch

Noise Blanker

TALKBACK

Roger Beep

PA/AM/FM mode

TX/RX S-meter

Channel/Frequency

Offset Direction

CTCSS DCS VOX

-5K

Alpha channel

High power

Middle power

Key lock

Beep sound

Emergency channel

BAND name

Channel

/Menu

Function and Features

7 COLOR DISPLAY

OFFSET FUNCTION

AM/FM/PA MODE

SQ, ASQ FUNCTION

10.

RF GAIN FUNCTION

11.

12.

SCAN FUNCTION

13.

RB FUNCTION

14.

NB FUNCTION

15.

DUAL-WATCH FUNCTION

16.

BEEP SOUND

17.

18.

TOT FUNCTION

HI-CUT FUNCTION

EMG CALL

CTCSS/DCS CODE ( OPTIONAL)

KEY LOCK FUNCTION

BUILT IN 12/24V CONVERTOR (OPTIONAL)

VOX FUNCTIONS( TRANSMIT WITHOUT PRESS PTT)

19.

20.

SUIT DYMATIC AND ELECTRONIC MICROPHONE

BACKLIGHT BRIGHTLESS ADJUSTABLE

-5KHZ FUNCTION

3. HOW TO USE THIS RADIO

3.1 Power On/Off the Radio.................................................................

3.3 Channel Control ..............................................................................

3.2 Volume Control ...............................................................................

※Squelch level Control (short press)

※ASQ Control (long press)

(1) Turn VOL switch clockwise to power on the radio, the LCD displays the

Norms and then displays channel number.

(2) Turn VOL switch anti-clockwise, until hear Ka Ta, the radio is powered

off.

(1) Short press [UP]/[DN] key to change channel by one step.

(2) Hold [UP]/[DN] can fast changed channel.

Note: The standard version support 12V DC power supply. optional version

(1) Short press

SQ/AQ

, until LCD displays " ", " " stands for

SQ/AQ level, the bigger value stands for high squelch level.

(2) Short press microphone [ UP ] or [ DN ] to change SQ/AQ level.

(3) Long press microphone [ UP ] or [ DN ] can fast change SQ/AQ level.

(4) Short press

SQ/AQ

or wait for 10 seconds to store and exit.

Note: The higher SQ level selected, the stronger signal required to open

speaker and hear the calling.

(1) Long press , until LCD displays "AQ", the ASQ function turned on.

(2) Short press , until LCD displays " ", " " stands for ASQ

level, the bigger value stands for high squelch level.

(3) Short press [UP]/[DN] to change ASQ level.

(4) Hold [UP]/[DN] can fast change ASQ level.

(5) Short press or wait for 10 seconds to store and exit.

(6) Long press key again to turn on SQL function.

Note: The higher ASQ level selected, the stronger signal required to open

speaker and hear the calling.

Turn clockwise to increase volume, anti-clockwise to decrease volume.

3.4

SQ/AQ

...................................................................................................

support 12+24V check your version before connect power supply.

AT-500M

※Mode Control (short press)

※Emergency Channel (short press)

※Functions (long press)

※Keypad Lock (long press)

(1) Short press , key to switch between / mode.

(2) The LCD displays the selected mode.

(1) First press , key to choose the first programmed emergency channel,

LCD displays EMG1.

(2) Second press , key to choose the second programmed emergency

channel.

(3) Third press , key to return to last normal channel, LCD displays

EMG2.

Note: The default emergency channel are channel 9 and channel 19.

See menus Emergency Channel Set page 8 for the emergency channel

configuration.

(1) Hold [UP ]/[DN] for over 5 seconds, when you hear /di di/, scan started.

(2) Short press [UP ]/[DN] key to change scan direction.

(3) Short press [AM]/[FM] to change mode, short press EMG or [PTT] to exit

scan.

Long press key to enter in memu and set different function.

(1) Long press key for over 2 seconds to lock the keys, LCD displays

(2) Long press key for over 2 seconds again to unlock the keys

disappears form LCD.

Note: In lock Mode all keys except PTT is valid.

3.5 ..................................................................................................

3.6 .....................................................................................................

3.7 Scan Function...................................................................................

AT-500M

The VOX function allows transmitting by speaking into the original

microphone without pressing the PTT switch.

Press [PTT] + [EMG] key to activate VOX function, LCD displays

microphone icon, and then press [PTT] + [EMG] key to disable VOX

function. The microphone icon disappeared.

Note: When turn on VOX, the mic icon flashes, VOX sensitivity and time

setting refer to page 6.

This function allows you to select the mode of operation for public

broadcasting.

Turn on PA mode: "PA" and modulation mode (AM/FM) flicker alternately.

The volume switch knob is used to adjust the audio level of mode PA.

This function allows you to adjust the volume of your walkie-talkie.

(1) Start the intercom function (see "intercom" on page 8).

(2) Hold down the PTT switch, then the [up] key increases or the [down] key

decreases the Talkback Level

(3) Release PTT switch and save Talkback Level.

Choose a 8Ω external speaker with 3.5 mm mono connector.

(1) Long press key to enter menu list.

(2) Short press microphone [ UP ] or [ DN ] or or to choose menu

to be.

(3) Short press key to enter function setting parameter of the chosen

function, the parameter blinks on LCD.

(4) Short press microphone [ UP ] or [ DN ] or or to choose

wanted setting.

(1) Hold to power on radio, until LCD displays the norms.

(2) Short press or or microphone [UP ]/[DN].

(3) Power off and power on again.

3.12 Install External Speaker ..............................................................

3.13 Menu Operations ..........................................................................

3.8 VOX function.....................................................................................

3.9 PA Function.......................................................................................

3.10 Talkback Level ...............................................................................

3.11 Norms Control ................................................................................

AT-500M

(5) Short press key to validate the mode and exit setting.

(6) Long press key or wait 10 seconds to store exit MENU.

NO. LCD display Function detail Setting details

1CTCSS/DCS

encode/decode

: CTCSS/DCS is OFF;

CT: 67.0Hz~250.3Hz；

DT: D023N~D754N；

Note: This function is optional.

2Beep sound

: turn on beep sound

: turn off beep sound

Default:

3 RF power setting

LO: low power

nI: middle power

HI: high power

Default: LO

Note: This function is valid only when the

radio work in HF model or HAM model.

4 Scan type setting

Sq: squelch scan

tI: time scan

Default:

5 HI-CUT setting

: turn off HI-CUT function

: turn on HI-CUT function

Default:

6Microphone gain 1~9, Total 9 levels

Default: 6

7Microphone type

EL: Electronic

dy: Dynamic

Default: EL

8VOX Sensitivity 1~9: total 9 levels

Default: 3

9 VOX Time 1~9: Total 9 levels

Default: 4

10 Talkback level

control

, 1~9

Default:

Note: Speak into microphone and watch

the S-meter to choose wanted mic gain .

AT-500M

NO. LCD display Function detail Setting details

11 Noise blanker

: turn off ANL/NB function

: turn on ANL/NB function

Default:

12 Offset direction

: Turn off offset；

-: negative offset, TX frequency low than RX

frequency;

+: minus offset, TX frequency high than RX

frequency;

13 RF gain level

control

Level AU 03,06,09~48

Default: oF

Note: If the AUTO RFG function is on,

the radio will turn on the automatic

RFG function.

14 RB sound setting

, 1-5

: turn off RB sound function.

Default:

15 Backlight color

setting

OR: Orange

gr: Green

bL: Blue

Cy: Cyan

yE: Yellow

PU: Purple

CL: White

Default: OR

16 Backlight

brighless

Level 1~6

Default: 4

17 Time out timer , 1~10Min

Default: 1

18 Frequency

-5KHz function

:turn on -5KHz function

:turn off -5KHz function

Default:

Note: This function is only valid for

radio operating in HAM mode.

Note: Valid only in HF or HAM mode.

AT-500M

(1) Choose a band to be modified.

(2) Long press key to enter menu list.

(3) Short press microphone [ UP ] or [ DN ] or or to choose BAND

name function memu, LCD displays .

(4) Short press key, the first digit blinks on LCD.

(5) Short press microphone [ UP ] or [ DN ] or or to choose the

character of the first digit.

(6) Short press key to validate the first digit. The second digit blinks on

LCD.

(7) Short press microphone [ UP ] or [ DN ] or or to choose the

character of the second digit.

(8) Short press key to validate the second digit and exit setting.

(9) Long press key or wait 10 seconds to store exit MENU.

(1) Long press key to enter menu list.

(2) Short press microphone [ UP ] or [ DN ] or or to choose EMG

function memu, LCD displays EMG1--09 on or EMG2--19 on.

(3) Short press EMG key, the character "on" or character "oF" blinks on

LCD.

(4) Short press microphone [ UP ] or [ DN ] or or to choose the

emergency channel is valid.

: stands for turn off current emergency channel.

(5) Short press key, the band name blinks on LCD.

(6) Short press microphone [ UP ] or [ DN ] or or to choose the

frequency band.

Note: This frequency band selection is valid only when the radio work in HF

model or HAM model.

3.14 Band Name Setting ......................................................................

3.15 Emergency Channel Setting .......................................................

AT-500M

Inhaltsverzeichnis

Andere AnyTone Radio Handbücher

AnyTone

AnyTone AT-5555 PLUS Bedienungsanleitung

AnyTone

AnyTone AM-580 Bedienungsanleitung

AnyTone

AnyTone SMART Bedienungsanleitung

AnyTone

AnyTone 578 Go Box DIY Kit Bedienungsanleitung

AnyTone

AnyTone AT-5289 Bedienungsanleitung

AnyTone

AnyTone SMART II Bedienungsanleitung

AnyTone

AnyTone AT-318UV Bedienungsanleitung

AnyTone

AnyTone AT 778 Bedienungsanleitung

AnyTone

AnyTone AT-5555 Bedienungsanleitung

AnyTone

AnyTone AT-398UV Bedienungsanleitung

AnyTone

AnyTone D578UV Gebrauchs- und Pflegehandbuch

AnyTone

AnyTone AT-5189 Bedienungsanleitung

AnyTone

AnyTone AT-D578UV Einrichtungshandbuch

AnyTone

AnyTone AT 778 Bedienungsanleitung

AnyTone

AnyTone DORIS Bedienungsanleitung

AnyTone

AnyTone DMR AT-D878U Bedienungsanleitung

AnyTone

AnyTone Apollo II Bedienungsanleitung

AnyTone

AnyTone AT-310M Bedienungsanleitung

AnyTone

AnyTone AT-588UV Bedienungsanleitung

AnyTone

AnyTone AT-D578UV Bedienungsanleitung

AnyTone

AnyTone AT888 Bedienungsanleitung

AnyTone

AnyTone GRACES Bedienungsanleitung

AnyTone

AnyTone AT-588 Bedienungsanleitung

AnyTone

AnyTone 868 Bedienungsanleitung

Beliebte Radio Handbücher anderer Marken

EisSound

EisSound KBSound iSelect Bedienungsanleitung

Midland

Midland 1001LWX Bedienungsanleitung

Konig

Konig HAV-SR41 Bedienungsanleitung

Roberts

Roberts exprssion Bedienungsanleitung

VDigi

VDigi DD3.0 Bedienungsanleitung

Radio Shack

Radio Shack 21-1863 Bedienungsanleitung

Roberts

Roberts Stream 207 Bedienungsanleitung

Sony

Sony Walkman SRF-M97 Bedienungsanleitung

Stanley

Stanley FatMax FMC770 Bedienungsanleitung

auna

auna DAB-Radio 10026947 Bedienungsanleitung

SOUNDMASTER

SOUNDMASTER UR190 Bedienungsanleitung

HYT

HYT TC-320 Bedienungsanleitung

auna multimedia

auna multimedia Yellowstone 10026851 Bedienungsanleitung

B-Tech

B-Tech GMRS-V2 Bedienungsanleitung

Weierwei

Weierwei VEV-V8 Bedienungsanleitung

SOUNDMASTER

SOUNDMASTER DAB750 Bedienungsanleitung

Telefunken

Telefunken TF-1505 Bedienungsanleitung

Makita

Makita LXRM03 Bedienungsanleitung